How to Replace Front Lower Ball Joint 2004-2008 Ford F-150

Buy Now!
New Ball Joint from 1AAuto.com 1aau.to/ib/1ASB...
This video shows you how to install a front lower ball joint on your 2004-2008 Ford F-150. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.
This process should be similar on the following vehicles:
2004 Ford F-150
2005 Ford F-150
2006 Ford F-150
2007 Ford F-150
2008 Ford F-150
Tools you will need:
• Pry Bar 1aau.to/oRX/1AX...
• 13mm Socket 1aau.to/obpK/1A...
• 18mm Socket 1aau.to/oaen/1A...
• 21mm Socket 1aau.to/oaen/1A...
• 22mm Socket 1aau.to/onT/1AX...
• 24mm Socket
• Ball Joint Press
• Pliers
• Snap Ring Pliers
• 1/2 Inch Impact Gun 1aau.to/or3/1AX...
• Socket Extensions 1aau.to/obpK/1A...
• Swivel
• Torque Wrench 1aau.to/oaBa/1A...
• Anti-Seize Grease
• Brake Parts Cleaner
• Gloves 1aau.to/oYg/1AX...
• Safety Glasses 1aau.to/oRq/1AX...
• Sandpaper
• Chisel 1aau.to/okw/1AX...
• Floor Jack 1aau.to/o2A/1AX...
• Hammer 1aau.to/oSI/1AX...
• Wheel Chocks
• Wire Brush 1aau.to/oso/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@jamesdonahue7701]

Excellent video! Great commentary, camera angle, and easy to understand step by step instruction.

[@youandiryan]

Just a little tip for some people. If you put the ball joints in the freezer overnight it will make sliding it in until the lower control arm much much easier

[@karlreynolds7747]

I am in the process of replacing the upper and lower ball joints. I have watched several TH-cam videos on the subject but yours was by far the most professionally done. Your step by step explanations were concise and the video was easy to see.
I really appreciated the info on the bolt sizes and the torque specs.
Also, you didn’t feel the need to resort to profanity to sound authoritative. I watched one video recently that was so laced with profanity that I had to shut it off-and I am a former sailor from Vietnam days.
Glad I found you on the TH-cam channels. Bless you.

[@skullfracture2]

You’re definitely not a DIYer, I can tell just by the way you handle your tools and all the little tricks and tips throughout the whole process. I appreciate you pointing out to start by tightening the bottom lug nut as well. Alot of people don’t do that and the wheel goes on cockeyed.

[@elmaschingon8237]

Love the video!!!! Thanks for taking your time and explaining everything. Have to replace mine. I must say I’m pretty terrified on doing it my self.

[@rollogic2988]

You're awesome dude! Great explanations and narration!

[@jesusgregoriojimenez6535]

No hablo inglés pero entendí y me sirvió el vídeo de Venezuela saludos

[@ericlane4885]

Excellent video

[@PatBlackwell-z3i]

So roughly how much does a ball joint replacement cost on a 07 f150 and should I have the sway bar and rods replaced also? Like a kit assembly?

[@corey7420]

Awesome video but I don’t think I can do this 😮

[@RickWalshCleaning]

Totally E X C E L L A N T video !

[@TRQ]

+RickWalsh Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

[@joemckenna8991]

Great video thanks

[@refujioacevedo8901]

Muchas gracias por enseñarme agradecido

[@jeremykochan5718]

nice. bout to save myself $400 in labor fees local shop wanted for 1 balljoint and 2 outer tie rod ends to get my front end alignment

[@RogueArcher24]

I havent been working on my vehicles for that long this will be the first time I've replaced a lower ball joint but wow what a dumb system compared to the upper system LOL

[@refujioacevedo8901]

Muy bien explicado

[@patrickblackwell9265]

Any other recommendations to replace while replacing the original ball joints and other original parts on the front end wheel assembly on a 07 F-150 with 130,000?

[@Santos1of1Productions]

holy rust

[@lokeycarter6679]

👌

[@tunercars3]

i think 4x4 trucks cars suv should have extra rust protection knowing they are going to be all season vehicles this poor truck is ate up

[@anthonyspencer6475]

Y didn't go auto repair school

[@chunoramos5370]

just ignore all the tust😂…