Bose Acoustimass 6 Series III subwoofer - pinout for using with other amps with out original cable
ฝัง
- เผยแพร่เมื่อ 13 ก.พ. 2022
- #bose #acoustimass #subwoofer
We are going to decipher the pinout configuration of this Bose Acoustimass 6 (works for the 10 too) series III subwoofer box to make it work with other non branded Bose amps with out having the original cable.
Forgot to put the description of the other pins, here it is:
1 Left -
2 Left +
3 Right -
4 Right +
5 Center -
6 Center +
7 not in use
8 not in use
9 not in use
10 Left back (Surround) -
11Left back (Surround) +
12 Right back (Surround) -
13 Right back (Surround) -
14 Subwoofer (low level ) +
15 Subwoofer (low level ) -
Remember that all speaker inputs must come already amplified, this box does not have amplifier for the satellite speakers, it only has filters or crossovers.
UNDER ANY CIRCUMSTANCE you put an amplified signal in the input of the subwoofer, it can burn the input preamplifier. Use only low level signal for this particular input. - วิทยาศาสตร์และเทคโนโลยี
Thanks for making this video
It’s good to see I’m not the only one who likes to tinker with speakers / subwoofers .
Electrician by trade but do low voltage for a hobby . Thanks for getting into the nitty gritty.
Awesome, I just got the subs going after being unused for over 10 years as I lost the stupid cable. I got a db15 female solder connector
Goes well with the three woofers.
very good and clear explanation, Thank you very much for shearing your knowledge
Thank you very much for your comment. I'm glad it helps. Hope I can share more videos after 2 years away.
Thank you sir for sharing this knowledge
You saved my life, thank you
I'm glad I could help. You tube don't pay much so cements like this make my day. Thank you so much.
So helpful video sir for me
I have 16 sereis aqustmus of boss and denon reciver amplis cabinet of fully damaged parts r sepret input bord is not workinng so what can I asembled only amplifire sir mean can I use only opratinal amplifire for sound system plese answer me sir if u have posible
Bro your a LIFE SAVER and straight to the point thank you!!! Im trying to connect the Acoustimass 10 IV sub module >> to my Studio Audio Interface (UAD Apollo 8p Thunderblt2) Please help! Do I have to Solder a DIY cable from those 2 little pins?
hola me podrias decir que tensiones tiene en la entrada del transformador y la salida del transformador porque tengo uno igual en el primario del transformador me da 60 v y en el segundario no me da tension creo que esta mal el transformador pero me podrias decir si tiene que activar algun componete el secundario de transformador
Very helpful Video Thank You . So to clarify all the surround speakers are powered by the receiver passing through the passive crossover in the Bose and the sub is powered by the Bose amplifier through the Active Crossover in the sub fed from the sub out on the receiver ?
Was you correct
Can you please make a video for acoustimass 9?
Hi . can u tell me, i wanna use acoustimas boxes without Woofer direct on my AV reciever. Is it possible ? thx
it worked thanks a lot
I know im on an old thread but do you know or can some one share the speaker configuration for the Acoustimass 10 Series IV? There are two speakers... do they run in series or parallel?
Hi. Is that possible for acoustimas 10 iii ?
Thank you
Hi there,
Please suggets me, can I use life style v35 speakers to other receivers like onkyo, denon or yamaha.
Please suggest
Those are cube speakers, right? you can use any speaker in home theater receivers from other brands definitively. I have the same Bose speakers in a Denon and an Onkyo receivers.
Sir can acoustimas 16 can direct to sub input of amplifier which is better sound if use pin cables or direct to rca jack connector?
I think it will reduce the interference.
Thank you for this video!
By chance do you know the pin size so I can make a custom connection?
Sorry, I don't know it, I don't have the equipment anymore.
Do you know at what frequency are Bose crossovers set for the satellite speakers? Thank you
No, I normally set the crossover to 100Hz. depending on the size of speaker.
does this work with acoustimass 16 II
Bro speaker point ???? Pkz total cover
Need to get a cable
Do you make and sale ?
How would you compare this model with the bose acoustismass 16 II ?
same question, same pin for 6.1 channel acoustims 16? please help, also help can i connect any oridinary speaker in boss acc,... 16 iii ? and can i use 5.1 channel avr in the acoustimas 16 6.1 channel ?
i have the acousticmass 10, if you need some help to find wich cable is or make revers ingeneering i can help you.
Thank you very much!
Yo tengo el acoustimass 20,puedes ayudarme con el diagrama del conector din de 5 pines para inyectarle señal de audip y echarlo a andar? Gracias
@@hugoolvera6736 claro, solo que no sé cómo contactarte vía privada para ponernos en contacto
@@socampo5737 Te escribí por acá mi email pero creo que youtube en automático borra esos mensajes, podrías acá mismo compartir la información respecto a las conexiones del subwoofer?
should i use same pin for 6.1 channel acoustims 16 ii ? please help, also help can i connect any oridinary speaker in boss acoustims 16 iii ? second question can i use 5.1 channel avr in the acoustimas 16 ii 6.1 channel ?
Sorry, I don't know if that is exactly the same. Second question, if you are using it just as subwoofer, yes you can. I mean, the sub output of the Home theater to the Bose subwoofer ad the satellite speakers connected to the Home theater (5.1 System)
@@Letsdosomethinguseful thanks it worked just because of your video, thanks.. i can reutilize this amazing woofer.
Hi Bro, I have one AM6 series 3, but subwoofer speaker no work, could you guide me how to fix this issue? Many thank for your advices. Regards
Does the satellite speakers work? if only the sub, test the subwoofer with an ohm meter or multimeter to see if it still gives, I BELIVE ITS 2 OR 4 OHMS. IF more than that or less, there is a problem with the speaker and could have damaged the output transistors. this system has an integrated circuit for the satellites and transistors for the subwoofer. Good Luck!
@@Letsdosomethinguseful ok, I don't know anything about electronics but your video has inspired me. I got an old Bose AM6 Series III (I think the same as yours) and I want to know if the bass speaker works. I have a multimeter. Would I set the multimeter to ohms and contact the two sub pins you identified to test for resistance? And, if so, it should show 2-4 Ohms if it's working? Thank you!
Hi can you do the same for the powered Acoustimass 9 which has 8 pin din cable at the sub unit?
I don't have an acoustimass 9 but you can search for "Bose acoustimass 9 8 din connector pinout" and it could bring the correct one for your system. Is that with a connector like DIN 8 or it is the mini Din 8?
Hi. Is it the pin connection 14-15 with Bose accoustimass 10 series IV? Tnx
yes, 15 being the negative one.
@@Letsdosomethinguseful thanks
If it has an 's' cable what do I do
Sorry, not sure what is an "S" cable.
Just cut all wire except for phono cable done it’s working like a active sub 😂
Really? Does it work well or give the same loudness?
I remember when you could build a component system using any brand and they'd all play well together... Then came Bose with proprietary connections that only work with Bose and change every time a new unit is made so even Bose won't work with Bose. Bose sucks.
Make you buy another Bose product.