2009-2014 F150 3rd Brake Light Review and DIY Install LED vs. Halogen upgrade and bulb repalcement

แชร์
ฝัง
  • เผยแพร่เมื่อ 8 ต.ค. 2024
  • EDIT: After chatting with the manufacturer I have found that the clear silicone/rubber "Caps" that I tried to put on the head of the screw was actually incorrect. Those "caps" have a center insert that you can tear out, you then use the ring as a washer/gasket on the screw before inserting the screw through the light housing. This will seal the connection to make a more water tight seal. I mistook them for a type of cap but it is definetely a gasket/washer.
    Today we are putting a 3rd brake light assembly upgrade on a 2013 F150 which is the same as all Ford F150 from 2009-2014. This is a SUPER easy DIY job that you can do, and a super easy and affordable mod.
    Issyzone did send me the assembly to review for free.
    As an Amazon Associate I earn from qualifying purchases:
    amzn.to/3bOZkcC
    To donate financially to the channel via Paypal:
    www.paypal.com...

ความคิดเห็น • 28

  • @AGuyandHisProjects
    @AGuyandHisProjects  3 ปีที่แล้ว +1

    EDIT: After chatting with the manufacturer I have found that the clear silicone/rubber "Caps" that I tried to put on the head of the screw was actually incorrect. Those "caps" have a center insert that you can tear out, you then use the ring as a washer/gasket on the screw before inserting the screw through the light housing. This will seal the connection to make a more water tight seal. I mistook them for a type of cap but it is definetely a gasket/washer.
    As an Amazon Associate I earn from qualifying purchases:
    amzn.to/3bOZkcC
    To donate financially to the channel via Paypal:
    www.paypal.com/cgi-bin/webscr?cmd=_donations&business=5PRRGY4GM2CSE¤cy_code=USD

    • @brandonadams6743
      @brandonadams6743 7 หลายเดือนก่อน

      Did it sit flush to the cab I recently had to replace my high mount light and the light I got doesn't sit flush it has a gap all the way around

  • @terrygallon3342
    @terrygallon3342 2 ปีที่แล้ว +1

    I'm happy that you stated the lumens.

    • @AGuyandHisProjects
      @AGuyandHisProjects  2 ปีที่แล้ว +1

      Glad I got it for you! I try to remember that stuff but half the time I get caught up and forget to mention it

  • @RiAndJoesEnduro
    @RiAndJoesEnduro 11 หลายเดือนก่อน

    Thank you bud
    I screwed up and took off the plastic first as well. I should have waited til the end. Noticed thats what u did to

    • @AGuyandHisProjects
      @AGuyandHisProjects  11 หลายเดือนก่อน

      Haha yep, glad I could help a little bit at least!

  • @caleblandry2580
    @caleblandry2580 3 ปีที่แล้ว +1

    Again great video. Just wanted to let you I’m watching. And the repair on my truck went great. Ridin great 👍 thx again.

    • @AGuyandHisProjects
      @AGuyandHisProjects  3 ปีที่แล้ว +1

      Thank you! Glad to hear the repair went great, what is your next project?

    • @caleblandry2580
      @caleblandry2580 3 ปีที่แล้ว

      @@AGuyandHisProjects I want to flush the engine, change the headlights, continue removing some dumb stickers, relocate the wiper Reservoir (removed previous owner) change all the lug nuts r find a key that works better then 19mm lol. And figure out why my brights come on when I signal to the right.

    • @caleblandry2580
      @caleblandry2580 3 ปีที่แล้ว

      @@AGuyandHisProjects I also really like that third brake light so..... prolly that too lol

    • @caleblandry2580
      @caleblandry2580 3 ปีที่แล้ว

      @@AGuyandHisProjects as far as the new truck you want. Maybe to should get the worst year (IMO) 97-98 Ford F-150. Or go with as old as you can get. Again IMO.

    • @AGuyandHisProjects
      @AGuyandHisProjects  3 ปีที่แล้ว +1

      @@caleblandry2580 Oh dang, sounds like you have some good hours coming up in the garage! Yeah, I really like this brake light as well, it is pretty snazzy looking for sure. I think I've maybe picked out what I want. Going to go look at a couple tonight after work actually. Stay tuned!

  • @scotthildebrand1904
    @scotthildebrand1904 2 ปีที่แล้ว +1

    Will your new 3rd light ,light up in reverse, or is it cargo light only?

  • @notoriouschris5228
    @notoriouschris5228 6 หลายเดือนก่อน +1

    Got mine in brake light works great but reverse doesn't work at all 😢

    • @AGuyandHisProjects
      @AGuyandHisProjects  6 หลายเดือนก่อน

      Bummer! I'm not entirely sure this is supposed to have reverse. I don't remember

  • @MrGeorgeferreira
    @MrGeorgeferreira 24 วันที่ผ่านมา

    Excellent.tku

  • @rickbico1099
    @rickbico1099 2 ปีที่แล้ว +1

    I have a 2010 f150 raptor. I figured it have the 3 wires with the 3 bulb connected to the end of the wiring. But it only a has 2 bulb at the end and one connector that connects to the stock 3rd brake light. I need help do I hardwire it. ??

    • @AGuyandHisProjects
      @AGuyandHisProjects  2 ปีที่แล้ว

      That is hard to answer without seeing it. If you are comfy hardwire g it I'd say go for it. The connectors make it easy to connect and remove but are not necessary to function

  • @tonyfoley9988
    @tonyfoley9988 2 ปีที่แล้ว

    This company is doing false advertising. I say this because you have to splice the wires for it to work and on the box it states "there's no splicing or anything like that" but it is.

    • @AGuyandHisProjects
      @AGuyandHisProjects  2 ปีที่แล้ว

      That is a bummer! The one I got as in video was plug and play

  • @vvvdog200
    @vvvdog200 ปีที่แล้ว +1

    It's not a reverse brake light it's just a backup light

    • @AGuyandHisProjects
      @AGuyandHisProjects  ปีที่แล้ว

      Yeah I picked up on that a wee bit after filming the video lol