I have taught myself solidworks and your videos really help me, as they show me tools and provide paths I didn’t know about for tackling more complex modeling
@EasyCADSolutions You are a very enthusiastic person, all works are works of art, let me also gain a lot of knowledge, you are the male god in my mind, thank you!
Thank you for your videos EasyCAD. However when I tried the wrap feature with emboss it showed me that that will result to zero thickness geometry. How can I solve this
@@EasyCADSolutions I can send you a surface model that I received that I will eventually need to replicate, it seems simple but wrap command, deform etc. doesn't end up looking the same and with no draft from my attempts.
Hi, nice work, but is there another method than "Wrap" that gives the same result? By same result I mean each texture element is straight to its base and equal to other textures. I tried to create dual surfaces & split them
@@EasyCADSolutions Sorry for the confusion, the problem with "wrap" is that you can use only once on a surface and you have to be very careful in placing it, in your example it works fine. In some cases I had to do several extrude process and slice them with surfaces to work. This is a 3rd method - Check this made in Creo at minute 20 th-cam.com/video/rpwV3lQjQnU/w-d-xo.html
Very nice! Only problem is for me I use SW Professional which unfortunately doesn’t have Surface Flatten feature… As I understand it is only available in SW Premium, correct?
The following content is converted into English using Google Translate. Please forgive me if the text does not make sense! Hello, I am a viewer from the Chinese area. I saw that you shared the amazing drawing file of Ren. I also tried to do it myself. I encountered the following difficulties. I hope to get your answers. When I use the "flatten surface" command and the "Fill Pattern" command on this plane, I draw a group of symmetrical hexagonal figures, but when I use the "Wrap" command, this group of hexagonal figures no longer Symmetry, based on the plane where the handle ridge is located, the center of the first hexagon in the front has no deviation from this plane, but the center of the first hexagon in the back is 1mm away from this plane. I would like to ask if this deviation is a common phenomenon after using the "Wrap" command? Or is there any flaw in my drawing process? Hope to get your insights on this matter, thank you!!
@@EasyCADSolutions I used the "Fill Pattern" command on the plane generated by the "flatten surface" command to draw a group of symmetrical hexagonal figures. But when I used the "Wrap" command to fit the hexagons to the surface, the group of hexagonal shapes became no longer symmetrical. I would like to ask if this deviation is a common phenomenon after using the "Wrap" command? Or is there any flaw in my drawing process? I hope the revised text can help you understand what I mean!! Hope to get your insights on this matter, thank you!!
How many bodies are left in solid bodies folder? In my solid bodies foler of features manager tree, 2 bodies can be seen.I would like to know it right is?
If more than one body is left then simply use the Delete and Keep Body feature. Click on the solid body which you need and select the keep body option and hit okay. So that only that selected body will be kept and rest all other solid and surface bodies get deleted
hello,thanks your teaching,but I have a question,why I can't used wrap,I setting 1.00mm, and system can't calculate,my pool English fromTaiwan,hope you can answer me,thanks！
In SolidWorks 2023 you must add the thickness only to the inward side while using the Cut-Thicken command in this exercise. Otherwise, the result will be invalid geometry.
So upset: we only have the Professional version of solid works so i can't use the "flatten surface" feature 😢. Maybe I'll do this exercise with 3D experience home just to learn...
Yes, in the professional version some features are not active, Yes you can try in 3D Experience home For more Queries and Suggestions contact me via WhatsApp +919793662583
This technique is outdated. Now we can draw a 2D image of any object and the application will generate its 3D counterpart automatically with the highest precision that cannot be achieved manually.
Been following your tutorials with a passion. When applying the wrap feature with the created sketch, for the life of me, i can't select the face on the body... I try to SELECT OTHER command and it still, won't select, thus i am unable to get past it... any ideas what causes this issue? /sw2022 premium SP3.1
I have taught myself solidworks and your videos really help me, as they show me tools and provide paths I didn’t know about for tackling more complex modeling
I am glad to hear this
Thanks 👍
Wrapping curve to curve is the goal for justify a planning surface pattern, very strong proceed. Thanks a lot.
Welcome 🙏
How you used fill pattern on flat surface, converted the entities of the inside geometry then wrapped that on the main body was super clever. bravo
Thank You 🙏
If you have any queries contact me via WhatsApp +919793662583 or mail at nishant13071992@gmail.com
Thanks for making this great tutorial. Unwrap/flatten surface was new for me..
Welcome 🤗
@EasyCADSolutions You are a very enthusiastic person, all works are works of art, let me also gain a lot of knowledge, you are the male god in my mind, thank you!
Thank you for your valuable insight
And, Thank you for watching my videos
Me gustan tus videos mi causa . Espero no termines nunca de bajar contenido . Saludos desde Perú
You're the best, good work, thanks for teaching us.
Thank you and Welcome 🤗
You are an amazing person, please keep going, we are learning from you and using your skills ❤️❤❤
I am glad to hear this 🤗
Thank You 😊👍
And done all without saving the part file once, well done!
Thanks 👍
thanks for this great tutorial. we all learn a lot from you
Yes me too
I learned a lot
❤❤❤❤
Thanks You to All🙏
Great video! Thank you! I keep learning SolidWorks and this channel is really great! Subscribed and loaded my "like-gun".
Thanks 🙏
And, Welcome 🤗
So tricky what you did there, super nice and creative, thank you to share this trick with us 💚💚
I am glad to hear this
Welcome 🤗
thanks for this great tutorial. we all learn a lot from you
Welcome 😊
Thank you for your videos EasyCAD. However when I tried the wrap feature with emboss it showed me that that will result to zero thickness geometry. How can I solve this
Sometimes it happened with Solidworks try to make it again in a new part file with the exact steps
Muy bueno!! Espero que sigas subiendo mas videos. Saludos
Thanks for watching 🤗
Very good 👍👌
Thanks 👍
That was handy. Thank you!
Welcome 🤗
For any queries contact me via WhatsApp +919793662583 or mail me at nishant13071992@gmail.com
Great work, is there a way to add draft to the embossed features? I am trying to cut angled slots with draft on a hammer handle grip.
What kind of pattern are you trying to do on a hammer?
@@EasyCADSolutions I can send you a surface model that I received that I will eventually need to replicate, it seems simple but wrap command, deform etc. doesn't end up looking the same and with no draft from my attempts.
You can send me the model on my WhatsApp number +919793662583
great tutorial!
Thank You 😊
Hi, nice work, but is there another method than "Wrap" that gives the same result? By same result I mean each texture element is straight to its base and equal to other textures. I tried to create dual surfaces & split them
Thanks for commenting but please elaborate more because i am not getting what you are trying to say
@@EasyCADSolutions Sorry for the confusion, the problem with "wrap" is that you can use only once on a surface and you have to be very careful in placing it, in your example it works fine. In some cases I had to do several extrude process and slice them with surfaces to work. This is a 3rd method - Check this made in Creo at minute 20
th-cam.com/video/rpwV3lQjQnU/w-d-xo.html
I have seen the video and it looks similar. It follows my video and makes it in creo
Very nice! Only problem is for me I use SW Professional which unfortunately doesn’t have Surface Flatten feature… As I understand it is only available in SW Premium, correct?
Thanks 👍
And, Yes you are correct
Thank for the video help and good job bro
Welcome 🤗
Amazing method
Thanks 👍
hy. can you share how to create Lure Fishing. like hollow body frog maybe . Thanks
I will try to make such Videos
@@EasyCADSolutions wow.. that would be very interesting. I will wait . thank you
Unfortunately the option Surface Flatten is unavailable in SolidWorks Professional 2018.
Yes, it's unavailable in Solidworks Professional 2018
The following content is converted into English using Google Translate. Please forgive me if the text does not make sense!
Hello, I am a viewer from the Chinese area. I saw that you shared the amazing drawing file of Ren. I also tried to do it myself. I encountered the following difficulties. I hope to get your answers.
When I use the "flatten surface" command and the "Fill Pattern" command on this plane, I draw a group of symmetrical hexagonal figures, but when I use the "Wrap" command, this group of hexagonal figures no longer Symmetry, based on the plane where the handle ridge is located, the center of the first hexagon in the front has no deviation from this plane, but the center of the first hexagon in the back is 1mm away from this plane.
I would like to ask if this deviation is a common phenomenon after using the "Wrap" command? Or is there any flaw in my drawing process?
Hope to get your insights on this matter, thank you!!
First of all thanks for your efforts to make a comment. But unfortunately I didn't understand well
@@EasyCADSolutions
I used the "Fill Pattern" command on the plane generated by the "flatten surface" command to draw a group of symmetrical hexagonal figures.
But when I used the "Wrap" command to fit the hexagons to the surface, the group of hexagonal shapes became no longer symmetrical.
I would like to ask if this deviation is a common phenomenon after using the "Wrap" command? Or is there any flaw in my drawing process?
I hope the revised text can help you understand what I mean!!
Hope to get your insights on this matter, thank you!!
Wrap can cause distortion
There is no flaw in your design process
For more queries contact me via WhatsApp. +919793662583
@@EasyCADSolutions
thank you
Appreciate ❤❤❤
Thanks 👍
How many bodies are left in solid bodies folder? In my solid bodies foler of features manager tree, 2 bodies can be seen.I would like to know it right is?
If more than one body is left then simply use the Delete and Keep Body feature. Click on the solid body which you need and select the keep body option and hit okay. So that only that selected body will be kept and rest all other solid and surface bodies get deleted
@@EasyCADSolutions Thank you.
Very, very good
Thanks 👍
hello,thanks your teaching,but I have a question,why I can't used wrap,I setting 1.00mm, and system can't calculate,my pool English fromTaiwan,hope you can answer me,thanks！
Sometimes it happens in solidworks
Try again or try to increase the margins in fill pattern
Дуже корисне відео. Дякую!
Welcome 😊
nice learning lots of things
Thank you 👍
good video card
👍
great sir!
Thank You 🙏
i learned a lot❤
I want to know how to be as good as you😂
Thanks 👍
Practice Practice and Practice by yourself
Respect 👏
Thanks 👍
Thanks a lot
Welcome 🤗
In SolidWorks 2023 you must add the thickness only to the inward side while using the Cut-Thicken command in this exercise. Otherwise, the result will be invalid geometry.
Okay 👍
Thanks for your insights
So upset: we only have the Professional version of solid works so i can't use the "flatten surface" feature 😢.
Maybe I'll do this exercise with 3D experience home just to learn...
Yes, in the professional version some features are not active, Yes you can try in 3D Experience home
For more Queries and Suggestions contact me via WhatsApp +919793662583
Genial !!!
Thanks 👍
I reminded this is same lightsaber.
Супер!!!
Thanks 👍
step one: do it in Rhino
Thanks for your suggestion
well, you lost me at "control +"...
What does that mean?
Study time…
👍
This technique is outdated. Now we can draw a 2D image of any object and the application will generate its 3D counterpart automatically with the highest precision that cannot be achieved manually.
What software or apps are used to make such parts?
Please share it here I am eagerly waiting for your comment
Been following your tutorials with a passion. When applying the wrap feature with the created sketch, for the life of me, i can't select the face on the body... I try to SELECT OTHER command and it still, won't select, thus i am unable to get past it... any ideas what causes this issue? /sw2022 premium SP3.1
Try to recreate the model and apply the same may solve your problem
Roger that boss, will do
terribly convoluted, but thanks for sharing.
Most Welcome 🤗