hello i really like ur design, can i get a soft file for this design? i already try my best to make it but it’s always failed when i try to Loft. I really need design for my task, if allowed, thank you
Very good you tutorial.. I was searching about the video like this ... but I don't found... But now I found it. Thank you so much my friend. If can please make more this videos... and how to modeling a fender of motocycle.... thank you again!
this is like the 2nd comment on a video that i made my whole life.. and i would like to say thaaaank you for all these videos.. you're the best and it's obvious that you understand every single command you're making..
Welcome dear, I needed to cut last part of this video some details missing. Please have a look to other videos on channel, you will find better tutorials.
Half of video goes in giving dimensions. However, very clever use of off set surface and split line. You could have used dome command for those little dimples...
Super helpful tutorial. The description is clear and at a very good pace. I really like to know how the pattern was created using the composite curve though. Is there any part two for this video?
Hi Dear I needed to cut last parts because there was a personal talk of me. You will see better tutorials I have made lately, please see my youtube channel.
Yes I follow your channel and searched for a similar pattern making there. Non of the pattern were made using a composite curve, but no problem, I'll find a way... Thank you for good tutorials.
That was fast as hell wtf hahahaha Nice skills, i can hear the multi clicks and keyboard action Very good tutorial Can you make more toturials using surfaces and cuts for organic shapes?
I am happy to hear that you find my videos useful. I will try to put my videos, please support my channel to grow and then I can spent time for making new tutorials
I needed to cut a part of this video after I upload it. I do not know how but there was some recorded sound with my family members :) Sure I will make better video.
very interesting your splines outlook, so you only use arcs, I might try it since I used to do that in autocad as well, just only arcs and speccially lines with fillets. thank you
Yeah, if you really designing real objects when needed you wanna revise them, using splines almost not make it possible, hard to control it. Thats why I use arcs.
Thanks for the tutorial. May I suggest that you slow down just a bit though. Your audio could be a little louder and clearer. It was kind of hard to follow your voice and kind of sounded like you were mumbling through most of the video. The keyboard and mouse clicks were very noticeable to hear throughout. I do find your video tutorials useful, but also frustrating to follow because of the opinions I had noted. Also, you should finish up with a second part to this video. It just ended all of a sudden without finishing the last step. thx
Hi, thanks for your feedbacks. I will consider them, those are valid critisims. I needed to cut video because there was my personal talks at the end, I had the intention of redoing this video however I did not have time for that. Regards
Hi, thank you for making this tutorial. I learned a lot. I run a channel on Fusion 360. Would you mind if I replicate this design using Fusion 360 for my channel? I will certainly credit you in my video. If you are not keen on this, I would understand. Please let me know.
Hi Dear, this video contains a lot of mistakes however still so many people watching and I am keeping it there. Normally I would create same video one more time. But please have a look my channel there are better contenst lately published
16:45 Dude, if you are going to pause for personal conversations with whoever that girl was, just pause the tutorial, pick it up in a second video and edit the 2 together. FYI in youtube studio you should be able to mute audio segments.
Hi Man, I did know that our personal conversations was there, I was shocked, probably during editing video I made a mistake. Thanks for informing me about.
@@3D-World no problem. Just saying, even if you had properly muted it, no voiceover takes away from the tutorial because you suddenly stopped explaining what you're doing.
Hi, thanks for your comment. You're one of the very few people how asked this question 😉 I needed to cut last parts because there was a personal talk of mine with wife. Which I do not understand how ended up there 😉
Sorry to say this man. I started this tutorial and its almost undoable. I will try to finish ofcourse but you go WAY to fast for this being a tutorial. Its more that anyone can see how easy and fast you can draw this part. Im REALLY not trying to be rude, but you use key combinations ALOT, and its almost not to follow whats happening, I need to rewind all the time to find out you just pressed a key combination then I need to rewind again to find out which combination it was, like all video long. If you are uploading this as a tutorial for people to learn, which ofcourse is really great: please work slower and just click the icons instead of key combinations which nobody can see.
Hi Dear, True, I needed to cut the last part because it contained some private talks. However, I have made better tutorials. Please have a look at my channel
THANK YOU for just getting right to it! Most channels have this long drawn out monologue before starting.
Welcome Man
hello i really like ur design, can i get a soft file for this design? i already try my best to make it but it’s always failed when i try to Loft. I really need design for my task, if allowed, thank you
Very good you tutorial.. I was searching about the video like this ... but I don't found... But now I found it. Thank you so much my friend. If can please make more this videos... and how to modeling a fender of motocycle.... thank you again!
this is like the 2nd comment on a video that i made my whole life.. and i would like to say thaaaank you for all these videos.. you're the best and it's obvious that you understand every single command you're making..
Hi dear. Thanks for nice comment. I am honored.
I am extremely happy that people able to develop themself with my tutorials
I really like this modeling style with surface offset, I learned a lot, thank You
Welcome dear, I needed to cut last part of this video some details missing.
Please have a look to other videos on channel, you will find better tutorials.
Half of video goes in giving dimensions. However, very clever use of off set surface and split line. You could have used dome command for those little dimples...
Super helpful tutorial. The description is clear and at a very good pace. I really like to know how the pattern was created using the composite curve though. Is there any part two for this video?
Hi Dear I needed to cut last parts because there was a personal talk of me.
You will see better tutorials I have made lately, please see my youtube channel.
Yes I follow your channel and searched for a similar pattern making there. Non of the pattern were made using a composite curve, but no problem, I'll find a way... Thank you for good tutorials.
@@3D-World You dan edit a video afterwards, it's called a voiceover
Awesome make more videos on complex surfacing
That was fast as hell wtf hahahaha
Nice skills, i can hear the multi clicks and keyboard action
Very good tutorial
Can you make more toturials using surfaces and cuts for organic shapes?
I am happy to hear that you find my videos useful.
I will try to put my videos, please support my channel to grow and then I can spent time for making new tutorials
Very good 👍 👏 👌
😇
tnaks for ur videos but video is incomplete. am a designer ur vidros helping me alot
I needed to cut a part of this video after I upload it. I do not know how but there was some recorded sound with my family members :) Sure I will make better video.
very interesting your splines outlook, so you only use arcs, I might try it since I used to do that in autocad as well, just only arcs and speccially lines with fillets. thank you
Yeah, if you really designing real objects when needed you wanna revise them, using splines almost not make it possible, hard to control it. Thats why I use arcs.
Thanks for the tutorial. May I suggest that you slow down just a bit though. Your audio could be a little louder and clearer. It was kind of hard to follow your voice and kind of sounded like you were mumbling through most of the video. The keyboard and mouse clicks were very noticeable to hear throughout. I do find your video tutorials useful, but also frustrating to follow because of the opinions I had noted. Also, you should finish up with a second part to this video. It just ended all of a sudden without finishing the last step. thx
Hi, thanks for your feedbacks. I will consider them, those are valid critisims.
I needed to cut video because there was my personal talks at the end, I had the intention of redoing this video however I did not have time for that.
Regards
Not able to move the spline after offsetting it as shown in the video @6:53. How did you do that?
really ! is this the end of this video ?? is there a part two ???
Hi Dear. I had to cut video at the end. Because there was my personal talks at the end how I do not know but happened. Soon you will see full video
COOL TTURIAL!!
I hope it's helpfull for watchers...
pls do more bottle designs thanks
I will do man. I believe this weekend a new video coming out.
Hi, thank you for making this tutorial. I learned a lot. I run a channel on Fusion 360. Would you mind if I replicate this design using Fusion 360 for my channel? I will certainly credit you in my video. If you are not keen on this, I would understand. Please let me know.
Welcome, Man.
You can that is not a problem.
@@3D-World Thank you for agreeing to this.
good video, but ur mouse clicking noise kill the whole thing
Hi Dear, this video contains a lot of mistakes however still so many people watching and I am keeping it there. Normally I would create same video one more time.
But please have a look my channel there are better contenst lately published
Sir can you tell your design system specifications
Hi, I am using my 12 year old laptop.
Intel i5
8 GB RAM
1024 MB Graphic Card.
16:45 Dude, if you are going to pause for personal conversations with whoever that girl was, just pause the tutorial, pick it up in a second video and edit the 2 together. FYI in youtube studio you should be able to mute audio segments.
Hi Man, I did know that our personal conversations was there, I was shocked, probably during editing video I made a mistake. Thanks for informing me about.
@@3D-World no problem. Just saying, even if you had properly muted it, no voiceover takes away from the tutorial because you suddenly stopped explaining what you're doing.
Would be cool if you went a LITTTLE bit slower. 16 minute video vs a 24 minute video doesn't make a big difference lol.
Thanks for your feedback, I am trying to improve that on my new videos.
Thank you
Hi, can you make the mold??
Idea is there for a great tutorial but unfortunately it is far too fast.
play at slower speed
thanks
çok iyi :)
where is part two?
Hi,
thanks for your comment.
You're one of the very few people how asked this question 😉
I needed to cut last parts because there was a personal talk of mine with wife. Which I do not understand how ended up there 😉
Speak up gang
Why do you use bad words?
If you are not happy with videos do not watch.
click, click, click, click, click, low volume mumble, click, click, click, click, click, click,
Sorry to say this man. I started this tutorial and its almost undoable. I will try to finish ofcourse but you go WAY to fast for this being a tutorial. Its more that anyone can see how easy and fast you can draw this part. Im REALLY not trying to be rude, but you use key combinations ALOT, and its almost not to follow whats happening, I need to rewind all the time to find out you just pressed a key combination then I need to rewind again to find out which combination it was, like all video long. If you are uploading this as a tutorial for people to learn, which ofcourse is really great: please work slower and just click the icons instead of key combinations which nobody can see.
Finished it succesfully. Video is incomplete though. Before finishing the holes it suddenly ended. Not the best tutorial but still learned from it.
Wasting time to watch this.
It's incomplete
Hi Dear,
True, I needed to cut the last part because it contained some private talks. However, I have made better tutorials. Please have a look at my channel