Another fine video tutorial! Re-dried coffee ground are very much unheralded in so many hobbies ... as a ground cover, bark applications, etc. After drying, it can be ground even finer by simply using an electric powered coffee grinder. The more you grind, the finer the grounds will be. You can have various different size grounds for different uses.
I'm a big fan of your channel. You explain everything so well. I also experimented with the wire trees. First I tried with more than 10 wires for the trunk wich is really hard to twist. I came to the conclusion that the best is with six wires. The reason for this ist, that at the bottom I spread four wires to make the root system and the remaining two I twist again to achieve a relatively stable "mounting pin". Drilling a small hole (1 mm) the tree stands securely on the layout. Best wishes, Andreas
The tress look great and the tutorial is really well done. For the cost of wire, foliage ,sand and gesso you can make unlimited trees. Thanks for sharing this very helpful and interesting technique.
Got to be the easiest way to make wire trees I've seen so far, where I live there is a lot of pine trees and I was wanting to do them for my layout because I'm modeling my state. So thank you for the video, I will definitely be making some of these
Another excellent video Martin. I think the reason you see people using 10 - 20 wires to twist their tree trunks, is because they use a lot finer wire than what you used. You need more to get thickness in the trunk, and more wires gives you more branches in the tree.
As allways a nice produced tutorial from Sweden. I have made similar trees , but used blended bark from actual pine trees. It has the pine color and are relative mat. even combined with acrylic painting, it still keeps mat. And by the way, it can also be used for many other things for example earth blend. Thanks.
Hallo Martin! Ich bin noch am Schattenbahnhof, nutze zum Kleben von Kork auf Sperrholz und von K-Gleis auf Kork Acryl. Ich verdünne es allerdings mit Wasser, bis ich die gewünschte Konsistenz habe. Auf Holz z.B. etwas dünner, da das Holz viel Feuchtigkeit aufsaugt. Im Gegensatz zu Holzleim bleibt Acryl elastisch - Äste sollten so z.B. auch später noch in Form gebracht werden können. Erfahrungen damit habe ich allerdings nicht. VGA
Thank you for the guide :) Easy to follow and you can make other stuff too from what i gather (yay, rosehip bushes too). I found that birch seeds imitate wonderfully maple leaves :) And are pretty much permanently the colour you pick the seeds thing from the trees(no need to buy scenics mold)
Excellent tutorial! I like this result a lot better than the one made from real twigs. For a little extra work you end up with a lot better looking model tree. Keep up the good work!
Thanks for the video. I had been looking for a tuturial pine for some time. Is it possible to replace the pine branch with something different? I do not have many facilities to find what you use in the market
Thank you for commenting! The purpose with the alcohol is to remove the water surface tension. This to make the water (paint) flow in cracks and on the surface. It is not neccesary on some surfaces, but I always have an amount of alcohol in my water thinner to make sure...
Another fine video tutorial! Re-dried coffee ground are very much unheralded in so many hobbies ... as a ground cover, bark applications, etc. After drying, it can be ground even finer by simply using an electric powered coffee grinder. The more you grind, the finer the grounds will be. You can have various different size grounds for different uses.
I'm a big fan of your channel. You explain everything so well. I also experimented with the wire trees. First I tried with more than 10 wires for the trunk wich is really hard to twist. I came to the conclusion that the best is with six wires. The reason for this ist, that at the bottom I spread four wires to make the root system and the remaining two I twist again to achieve a relatively stable "mounting pin". Drilling a small hole (1 mm) the tree stands securely on the layout. Best wishes, Andreas
thanks for the sharing 👍
The tress look great and the tutorial is really well done. For the cost of wire, foliage ,sand and gesso you can make unlimited trees. Thanks for sharing this very helpful and interesting technique.
Great video! The coffee grounds really add realism to that bark!
Got to be the easiest way to make wire trees I've seen so far, where I live there is a lot of pine trees and I was wanting to do them for my layout because I'm modeling my state. So thank you for the video, I will definitely be making some of these
Another excellent video Martin. I think the reason you see people using 10 - 20 wires to twist their tree trunks, is because they use a lot finer wire than what you used. You need more to get thickness in the trunk, and more wires gives you more branches in the tree.
BNSF3012 Nscale very true but with the finer wire painting the branches becomes much harder.
As allways a nice produced tutorial from Sweden.
I have made similar trees , but used blended bark from actual pine trees.
It has the pine color and are relative mat. even combined with acrylic painting, it still keeps mat.
And by the way, it can also be used for many other things for example earth blend.
Thanks.
Thank you for this information! Then I will for sure try to experiment with bark!
Amazing Pine trees
Marklin cómo siempre brindando sus pequeños proyectos, muy sencillos y hermosos resultados, te felicito una vez más, y muchas gracias por tu esfuerzo!
Marklin original como siempre. Un pequeño esfuerzo y traduce al español, somos muchos los que te seguimos. Gracias
another great video,thank you
Great videos. Very well explained. Thank you so much for sharing your knowledge
Hallo Martin!
Ich bin noch am Schattenbahnhof, nutze zum Kleben von Kork auf Sperrholz und von K-Gleis auf Kork Acryl. Ich verdünne es allerdings mit Wasser, bis ich die gewünschte Konsistenz habe. Auf Holz z.B. etwas dünner, da das Holz viel Feuchtigkeit aufsaugt. Im Gegensatz zu Holzleim bleibt Acryl elastisch - Äste sollten so z.B. auch später noch in Form gebracht werden können. Erfahrungen damit habe ich allerdings nicht.
VGA
Thank you for the guide :) Easy to follow and you can make other stuff too from what i gather (yay, rosehip bushes too).
I found that birch seeds imitate wonderfully maple leaves :)
And are pretty much permanently the colour you pick the seeds thing from the trees(no need to buy scenics mold)
Es un placer ver tus videos, muchas gracias , un saludo desde Euscadi
thanks for this. i was searching for a wile ho to do this realistic so now i got it
Excellent tutorial! I like this result a lot better than the one made from real twigs. For a little extra work you end up with a lot better looking model tree. Keep up the good work!
Beautiful, thank you very much.
you are awesome
Prepay nice video. The trees you are making are great" 👍👍
fab excellent
Hello Mark. 💖 your videos and I've learned allot. Love your enthusiasm and playfulness thank for your efforts.
hello from the netherlands!
Hi! (y)
Excellent tutorial. What kind(s) of pine trees do you have over there?
I belive the Akrylat is 10 times more expensive than Liquitex but PVA glue seems to be the answer to almost anything :-)
Hi! The container of Akrylat costed 8,00 SEK at Hornbach. I was surpriced. Maybe the pricing was wrong then?
Ottimo bel lavoro✌🏻️✌🏻👏🏻👏🏻
Tolles video würde aber gerne noch wissen wie du den Baumstumpf, also am Boden der Platte befestigt hast. Oder den Baumstumpf selber gemacht hast.
Hi, you say you need 4 wires for H0, but what you think for O scale, 6 to 8? Because O is twice the H0 scale, just simple rhinking.
Nice Tutorial
Thanks for the video. I had been looking for a tuturial pine for some time. Is it possible to replace the pine branch with something different? I do not have many facilities to find what you use in the market
I don’t now of licorice root is useable? You get then a real bark of a tree?.
En español estaría bueno! Gracias
Pine? Are pines not mostly conical?
I m a bonsai guy and it's very rare to see a pine looking like that.
pudes hacer este mismo vídeo en español? por favor
Why do you use alcohol at 7:25? I´m always using water and I think it´s also perfect.
Thank you for commenting! The purpose with the alcohol is to remove the water surface tension. This to make the water (paint) flow in cracks and on the surface. It is not neccesary on some surfaces, but I always have an amount of alcohol in my water thinner to make sure...
Maybe I have to try it! Thank you for the answer.
Yo ya slo pedi una vez , pues tiene algo en castellano
That's a lot of metal to use if you need to make 1000 of them
Indeed. I only use this type of wire tree for the "front" on my layout. I use much simpler trees in less exposed areas.
pudes hacer este mismo vídeo en español? por favor