How to program Ford Explorer (6th Gen) key fob yourself without additional / special tools

Hi everyone, just wanted to share that I was able to program an 3rd (or additional) key fob myself! (2022 model) via the backup key slot in the storage compartment.
Here are the steps:-
1. Open the center console lid. With the buttons facing upward and the unlock button facing the front of your vehicle, place the first smart key (already programmed one) into the backup slot.
2. Press the push button ignition switch to turn on (do not press brake).
3. Wait five seconds (or until the chime sound stops), and then press the push button ignition switch again to turn off.
4. Remove the smart key.
5. Within 10 seconds, place a second programmed smart key in the backup slot and press the push button ignition switch (to turn on).
6. Wait five seconds and then press the push button ignition switch again (to turn off)
7. Remove the smart key.
8. Wait five seconds, then place the unprogrammed smart key in the backup slot and press the push button ignition switch ( to turn on)
Programming is now complete. Check that the remote control functions operate and your vehicle starts with the new smart key.
If programming was unsuccessful, wait 10 seconds and repeat Steps 1 through 6.
Apologies the video cut out right after successful programming of the key fob :(

[@tedneidhardt2597]

can you program if you only have 1 key fob?

[@JonoBedroomGuitarist]

Sorry I don't believe we can self program with only one admin key