Rear Brake Clean and Pad Change KTM Duke 390 125 200 250
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- Regular maintenance of the rear brake unit on the KTM Duke 390 125 200 250 will ensure good performance and will also allow you to change the rear brake pads.
Instagram: / moto_mirius
Subscribe to keep up to date with the regular content: bit.ly/2UWwY90
___
Upgrade Links - Moto Mirius
www.motomirius...
KTM Duke 390 Servicing - Moto Mirius
www.motomirius...
Watch KTM Duke 390 Servicing Videos on TH-cam
• KTM Duke 390 Service a...
KTM Duke 390 Upgrades - Moto Mirius
www.motomirius...
____
Follow me here:
Instagram: / moto_mirius
Facebook: / motomirius
Website: www.moto.mirius...
___
Music provided by Epidemic Sound: www.epidemicso...
___
Logo: bit.ly/2Zau67P
#RokONSquad #MotoMirius #KTM390
moto mirius,ktm 390,ktm motorcycle,ktm,
ktm duke 390,390 KTM Duke,ktm duke,duke 390,390 duke,duke 390 mods, 390 duke mods, duke 390 modified
2017 ktm duke 390,ktm duke 390 2017,2017 duke 390,390 duke 2017,duke 390 2017,2017 ktm duke,2017 duke 390 modified,2017 duke 390 mods,
2018 ktm duke 390,ktm duke 390 2018,2018 duke 390,390 duke 2018,duke 390 2018,2018 ktm duke,2018 duke 390 modified,2018 duke 390 mods,
2019 ktm duke 390,ktm duke 390 2019,2019 duke 390,390 duke 2019,duke 390 2019,2019 ktm duke,2019 duke 390 modified,2019 duke 390 mods,
2020 ktm duke 390,ktm duke 390 2020,2020 duke 390,390 duke 2020,duke 390 2020,2020 ktm duke,2020 duke 390 modified,2020 duke 390 mods,
ktm rc 390,ktm rc,ktm,rc 390,390 rc,rc 390 mods, 390 KTM rc
2017 ktm rc 390,2017 ktm rc,2017 ktm,2017 rc 390,2017 390 rc,2017 rc 390 mods,2017 390 KTM rc,ktm rc 390 2017,ktm rc 2017,rc 390 2017,390 rc 2017,rc 390 mods 2017, 390 KTM rc 2017
ktm duke 125,125 KTM Duke,duke 125,125 duke,duke 125 mods, 125 duke mods, duke 125 modified
ktm duke 250,250 KTM Duke,duke 250,250 duke,duke 250 mods, 250 duke mods, duke 250 modified
ktm duke 200,200 KTM Duke,duke 200,200 duke,duke 200 mods, 200 duke mods, duke 200 modified
![[UNCUT] “อภิสิทธิ์” ครม.อุ๊งอิ๊ง แย่งเก้าอี้กันฝุ่นตลบ “ทักษิณ” บงการเอง Iคนดังนั่งเคลียร์I 21ส.ค.67](http://i.ytimg.com/vi/a_b-kItw2jY/mqdefault.jpg)
Great explanation of the rear brake unit, can't wait to see a full maintenance of the rear brake, the glide pins and stuff. Thanks as always my knowledge grows with your videos!
Thanks, always appreciated. Hopefully it will come along soon, but one of many videos still to do!
still waiting
I've been watching all our ktm 390 videos and I don't even have one yet. I do plan on getting one soon. I will be able to work on the bike once I get it. Thanks for the videos
Thanks, you will be an expert! This is one of my all time favourite bikes.
I’m in love with this bike. Best purchase I’ve ever made.
Thanks David always a pleasure!🏍
Thanks, much appreciated
I LOVE your passion sharing this model technical knowledge / guideline.. thanks from Malaysia KTM rider.
My pleasure! Thanks
Hi David, thanks for the easy explanation. I was following you step by step but mistakenly I pressed the rear brake lever and now the piston moved to the farthest outermost position (almost no gap between the disc rotor and the piston), hence making it impossible to slide the new brake pads into their position. Could you please tell me how to move the piston back to its innermost original position so that I could install the pads.
Thanks
Hi!
I did the same mistake, did you get help?
How did you get it fixed? I have the same problem
As always, clear as daylight! Thanks & Regards!
Still working towards it - waiting to get the 650 Bandit fuel issues sorted, can't have too many bikes in pieces at the same time - no more than three is my rule!
Good advice David , really well produced video . Peace and love brother 👍🏻☮❤
Thanks Springy. I don't know how you manage to do it on a phone!
@@MotoMirius Ah ..simplicity ..and remember my vids are all wobbly and badly edited! 👍🏻☮❤
It is a big help right I encounter problem with my rear brake
Good work with that!
Hola david! Quisiera saber si las tapas de metal que traen las balatas nuevas debe retirarse de las mismas? O se pueden instalar así? Las refacciones de BAJAJ, son compatibles con ktm y estas refacciones, las balatas traen una tapa metálica en la parte trasera
Hola, no hay razón para quitar las cuñas metálicas de la parte trasera; están ahí para ayudar a eliminar el chirrido de los frenos.
Thanks!! Bro!! You save my life!! 😂😭
Buen trabajo. Muchas gracias por tu info.
Очень полезное видео. Спасибо!
You are very welcome! Thanks
Thanks again! for for great bike tutorial
Thank you, much appreciated!
Thanks sir
Welcome
Do you still have the duke 390's stock side mirrors, can you shorten it for ease in lane filtering, cause the stock height gets easily caught on trucks and vans side mirror. Can you make a tutorial on how to best do it. Informative vids by the way😁
Thanks, much appreciated. There is never a single perfect placement for mirrors - too high and they catch van mirrors, below the handlebars and they catch car mirrors, depending on your body shape they may just show your elbows etc and on the Duke, they hit the tank and fairings. I have a set of mirrors I bought for just this purpose - but it will require welding so I'm still figuring out the design - there are some mirrors which would do the job perfectly but they are very expensive.
My breaks are not working after cleaning and replacing back them any suggestions
If you have pumped them back up with the lever so they move forward against the disk then they will work - you must remember this step, but it only takes a few pumps. If this is not happening then you need to check and see what is wrong.
Hi David, thanks for the explanation, is the 125 and 390 gen 1, the same calipar, thanks in advance
The same rear caliper has been fitted to the 125 to 390 Dukes from 2011 to 2021
@@MotoMirius wow thats good to know, thanks for sharing your knowledge
Why u didn't turn the reservoir rubber cap upside down..
Because it has fluid on it, and if you turn it upside down it will run down onto the top part where it shouldn't be.
i cant get my caliper to move back n forth like that. I don't know if my spring is too strong or what the deal is. Id rather not have to remove the whole caliper just to fit in the inside pad. Anyone have any ideas on why my rear caliper doesn't easily move like in the video?
Normally because it needs cleaning.
I don’t have enough room to put the pads back in
You might've squeezed the brake lever. You'll need to push the piston back in by moving the caliper.
Tell me, is the tire tubeless or with a tube? Is the MICHELIN STREET RADIAL 150/60R17 tire suitable?
Cast wheels are tubeless. If you are unsure about a tyre, go to the manufacturer website and they will have a tyre guide which lists the tyres that fit your bike. So Michelin for example recommend the PILOT POWER 2CT. The Street will fit the rim so you can use it, but it's not what Michelin recommend for the bike as it is a more general purpose tyre and Michelin (and most other manufacturers) recommend a sports tyre for this bike.
@@MotoMirius Thanks for the detailed answer
Hi mate :) is it normal for the calliper to heat up a lot after replacing the pads?
Thanks
Yes - caliper and disc should burn your fingers after heavy or repeated braking - a lot of friction is involved. If you watch videos of racing vehicles in the dark the disc will glow red hot.
Hello sir .Thank you 😊
Thank you, much appreciated.
How do you push the piston in please
Unbolt the caliper and rock it backwards and forwards so that the pads are pushed back by the disk. If you've already removed the caliper, with the old pads in place, lever them apart with a pry bar of some sort - a large screwdriver can work.
Hey David I really need your help how can I reset the piston if it’s really pushed out
This is why you rock the caliper before removing, but even so sometimes you need more. If your piston is pushed out it sounds like the lever was moved with the caliper removed. You can get special pliers and tools to push the piston back. In an emergency get one or more pads back in and lever against the pad (pad against piston) to push the piston back in. If it needs cleaning it can be stiff to push back in.
bro how much do they charge to replace front and rear brake pads ?? in showroom ?
I wouldn't know - depends how much they charge per hour. But this is so simple to do that I don't recall paying anyone to do it.
Don't suppose you know if the standard stock pads are sintered pads?
They were on mine and others have said the same. It may depend where you live. Easy to check - just pull a pad and see if there are flecks of a brassy metal in the pad.
Helpful
Glad you think so!
Hey david! I recently removed the cap on my rear brake reservoir and there was quite a bit of crystalization in the resevour and on the rubber cap. Is this a problem?
Sounds like a change of fluid is overdue. You shouldn't be getting any noticeable crystallisation
@@MotoMirius ill get on that as soon as possible! Thanks for the reply
Any tips on stopping the brake from binding ?
Keep it clean. It will only bind if you've failed to keep on top of it.
Alguien sabe porque el mío no regresa y queda como duro el freno trasero 😣😞
Si las almohadillas se pegan, es casi seguro que ellas o los pasadores estén sucios y necesiten limpieza. Las piezas limpias se moverán libremente.
You must still do the valve clearance (shim) video.... Regards!
Coming soon! Well soon ish - needs doing but as I say depends how quickly I find the issue with the Bandit
hello.. what brake fluid use for ktm duke 125 2021 ? thanks
I don't think brand is important for brake fluid - just use a mainstream brand and change it regularly
dot4 or dot5.1 ?
@@jevsplay5116 Doesn't really matter unless you are racing. It's more important to change the fluid than how much you spend on it - I would bet 90% of bikes are overdue for a change in brake fluid
Hi, how do i remove the front brake pad,
It's covered in this video - th-cam.com/video/8iA7Nsd07Lo/w-d-xo.html
👌👌👌👌👌👌👌👍
My foot brake came loose. Help!
Which part?
The banjo bolt, right behind the foot peg in your video.
BTW I brought my bike to the US from the UK.
@@rolan2dr As I commented on your forum post - I don't see how that bolt came out without human intervention- most likely someone really badly adjusted the rear brake lever position. It isn't a banjo bolt. I suggest you buy a second hand master cylinder and use the parts you need from it.
@@MotoMirius I bought a second hand master cylinder but I can’t get the foot brake to stay in place to keep the push rod in place. I guess I’m going to have to take it to a dealer.
how to take this stupid service light off .. ? i dont want pay 160 pound every 4.000 miles just for change me oil :)) ktm duke 125 2021
There are links to the other videos on card in this video and in the description, but to save you clicking the video you want is here th-cam.com/video/5Zpz1IAsCaw/w-d-xo.html
there is no these option preference .. only settings ...
@@jevsplay5116 You just set it far into the future in mileage and date and it never comes on again
any indian viewers 😍