Cheers mate! You helped fix my battery problem. The battery was full, but the monitor was reading an empty. It did show the bars and they was draining, but overtime, it was draining just too fast. I was able to see the temperature for the controller as well! So i'm set and able to read it!
Hi sorry please could you help me my bike is 36v 250w motor in regards to the VOL setting is this setting to indicate how much battery is left or isit voltage control to the motor? My default value on setting 1 is not 31.5 but 10 please could you explain what VOL is
what you are missing is the fact, that when you press up and down 10 seconds after turning display on, it will bring you to maximum speed settings. If you press it for example 1 minute after turning on display - it will not bring you to those settings, but will allow you to reset distance since the last reset.
Meu display travou , ele fica mostrando 555 você consegue mexer nesses números ,mais não vai pra outras funções , o que devo fazer para destravar ou desbloquear?
This is critical for making a purchasing decision. (05:05) If the motor manufacturer doesn't respond to inquiries (almost ALL of them will NOT respond to user emails) but you know the electrical specifications of the motor (watts, amps, etc), are the P1 settings obvious and we can still program the unit? OR...does it require knowing proprietary manufacturer codes to set for given motor electrical specification values and we're out of luck when manufacturers don't respond? (e.g. for 750W motor enter "3", for 1000W motor enter "5" and so on). If it requires entering codes, rather than actual specification data, is there documentation anywhere that translates motor electrical specifications to the required codes?
Hello.... First thanks for videos very helpfull.. I have a 12000w e-bike with the ukc1 display... Im going to install the app to use with the Bluetooth.... I saw that is as different driving modes as boost and others that i dont remenber the names... I like to understand that because sometimes when i brake she gives a jump forward... Can you give a litlle hellp?? Thanks a lot
Hi buddy I really appreciate your videos on all e-bike rides and information. Do you think you can do a video on the display screen for the kristall rx20 electric folding bike please I want to know how to use the settings on the screen please
LCD81F how do you put the speed on every pass, like pass 1 it use 20% batt, pas 2 40% pas 3 60% pass 4 80% 5 100% ??? i can not find it anymoreq, i can not get into that mode again, can you help me ?
many kits dont come with manuals unfortunate, thankfully the people that do have manuals have created PDF's that you can find with a simple google search, just look for KTLCD3 Parameters Manual and you should get PDF's as your first and second result
I have a KT-LCD7. Throttle works at zero but the pas and cruise I can't find. I did EVERYTHING in the directions. My milage is set at zero and won't change while riding.
Hallo I have Et. Cycle F720 from Germany.it has a Das Kit c7. but with my Das kit C7 I cannot change the settings (especially I cannot change the speed settings for my throttle) . if I buy Das kit c6BBT or Das kit c7BBT will it work with my ebike. Please let me know.
Great descriptions and a levelheaded approach to programming.. Helped a lot with my new controller. Do you happen to have a wiring diagram for a 1200w Risunmotor controller? KT36/48VPRL-SLSO2G They dont send a wiring diagram with their controller. I am an electrical contr. and just need the ID of the terminals. thanks much
Hi I changed the old damaged BLDC controller with the new one (KT-48ZWSRL) I also had the 6 wires for the Hall sensor, didn’t connect the white one. If I go in „walk“ mode (long press of down button) the motor is rotating but if I use throttle nothing is happening. Some advice?
I have NCM Milano with Das Kit controller in U.K. if I sop in high gear starting is near impossible as there is no throttle (UK law). In walk mode the power is maximum but speed is limited to 3 mph. Is it possible to reprogrammed to a higher speed so that I can get started and change down gear?
I think , your video is an awesome video that's exactly what I'm looking for someone to explain it to me from the very beginning . because that's exactly who I am a beginner. but you keep saying referr to manual on the motor is that what you're referring to??
Hi can you run a 48v battery off this screen because I've tried it and both of the screens I had of burnout they still turn on but they won't work the machine and it's only a 36v kit what I've been told there 36 to 48 V screens football full of burnt out
Hi I hope you can help. I have got 48v 1000w ebike with throttle battery display. I have purchase a lcd screen to connect but there is no connection to conection. I try to weld to the same wire colour but can't use throttle anymore. My question is Can i use anther lcd or just have to use throttle power signal display?
Hey I have an issue with my bike the lcd and everything works the throttle is not responding , all wires look fine not sure what to do! I have videos to show what I mean
i have a cheep ebike its my first i started to try and fugure out the setting now the battery runs out in like 30 min i cant find anything that said reset or factory setting can you help
Informative video thanks - Is there any way of changing the wattage that is applied with each PAS level - if that makes sense - for example my PAS level 1 applies 50-120w of power, PAS2 120-220w, PAS3 220-350w, PAS4 350-420w and PAS5 420-520w - my motor was a 350w but it failed, I now I have a 250w and I am a bit concerned that PAS5 will decrease it life span as the other one failed after 14 months.
Hi I have a gogobest gf600 I need the parameter settings for it ihad an error code so I switched it off and back on it cleared the error but my settings have all changed I need the parameter settings to reinstall
Little late to the party but I'll try anyway. I currently have a 36v battery running on the KT-22a - 36v/48v- 500/750W. My question is what will happen if I upgrade to a 48v battery? Simple math pushes the Watts to 1056 will the controller limit the Watts?
The controller will use the same current. Why are you trying to limit the Watts? To protect your motor? You can restrict the Current output of the controller using the C5 parameter, which will restrict the Watts in a similar fashion. Setting C5 to 10 will divide the Max Current by 1.10. Setting to 8 will divide by 1.15, 7 by 1.2, 6 by 1.25, 5 by 1.33, 4 by 1.5 and 3 by 2.0.
Hi pal, thanks for the video it was just what I was looking for, but could not find anywhere. I was messing about with my LCD and upset the factory settings, and was unable to find instructions on how to reset my computer, until I found your video. I am delighted with myself after seeing your video I reset my computer on my Zipper Z6 36V e-bike. I think in the US its called the Archer e-bike! You are a scholar and a gentleman. From John in Ireland... 13th July 2022.. (I have a question, my bike has just walk assist at 6 mph, can this be changed to full power on my thumb drive?) Thanks in advance.
have a problem with this display when I turn on this screen appears with 4 0000 and I cannot make it work because I do not know the code can you help me please?
Alexandre Costa Hi, really nice video. I have a question, i buyed a 36v 500w Hub motor, and the controller doesn´t have a connection to a LCD panel so i can control the level of the power of the motor. Do you know a solution to have it incorporated somewhere? The reason, is that the PAS always goes to full power on the motor, and sometimes i don´t need that, i need just a smooth assistance of the motor.
Hey Alexandre, You would have to buy a new controller that comes with an LCD or LED that will work with your 500w motor. The good news is that if you match the voltage and the wattage for your motor, there are plenty of great options under $60 that will really help you out and allow for PAS. Let us know what you come up with. Cheers!
Is there a way to increase the LCD timeout settings? I believe the current default is 5 minutes. Wipes out your trip statistics if you have to stop for longer than 5 minutes. Thanks!
no there is no way to change timeout settings, the best way you can calculate your total distance for a single trip is to write it down every time you stop then add them together for your total
I have a 1500W motor Ebike .And I really need a 48v that will get up to 72V .The one I had for it is a SW900 LCD E-zBike display but I have tried to order this two times and they never send me the right one.So do you know just who I can order this one I really need or just one that will do the 48v Up to 72V that only my 1500W motor will work with?????
Hi this was of great help thanks ! dont suppose you could recomend some decent mudguards for my fat tyre bike please ? as im struggling to find some .; thanks !!!
hello, i have yose power 36v 350w kit and theyre batery 36V10.4Ah E-bike Pedelec Li-ion battery downtube Bottle Lithium battery. i want to know the setting for my bike but i cant find it anywhere, would u be able to help me ??
Did you have istruction about display? Unfortunately on my disply it s hapen this: When is on ask me the pin but i don t have, someone says me it impossible and i ve to buy another display You can suggest me where can i find instruction
if it is asking for a pin the LCD may have a password enabled, unfortunately there is no easy way to bypass the password without buying a new LCD, you can try to unlock it but its easiest to just get a new one
hello thanks for the video, a question this screen serves for a golden motor brand engine, this motor has to connect screen and pedaling sensor is 36v will this screen work?
I have a KT-LCD display and I have a 48V battery that is suppose to show up to 58.8V but the battery only shows 53.6V fully charged and it cuts out at 33.6V. The P5 on the settings was set at 12, and I understand that is suppose to be for a 36V battery system. It is really suppose to be set at 15, for a 48V Battery system or "0". Are you suppose to change the C10 setting to "Yes" to make changes on the display?
Did you find any answers? This depends a bit on your battery chemistry and if your batteries are working as they should. I have blown 2 cells in my lipo packs due to 1st time a bad balance connector and 2nd time vibrations and rubbing on the bike. After this the cells can go dead short so the other cells do not see them just as if there was only a straight wire there. Then if you charge without balancing or without checking you are getting a balance voltage on all of the cells you can be overcharging the other cells as the blown battery cell is no longer there to absorb it's share of the voltage. Then you end up with a battery pack that is 3.6V lower for each blown cell also you will be damaging the pack and risking a fire each time you try to charge. This can confuse the controller.
I am not sure what LCD unit I need. I have a 20" front-wheel-drive 36V 750W motor & powered by a 36V 20ah ion-lithium battery ( I am new to this so can you please help me)
typically KTLCD3 and KTLCD8 work the same on KT controllers, LCD8 is better though, it has a full color display and is able to show you all the settings at once
Anyone know what parameter settings I should use if I use it with a Bafang BBS02B 750w mid drive 48 volt? Originally used the KT-LCD3 with rear hub 1000w.
Hey hey I would like to thank you for your assistance on how to program my LCD display I just reprogram and now I'm doing every bit of 45 miles to Highway thank you I was only doing 15 miles per hour big difference thank you for your assistance
Hey, thx for the vid. I got a problem on my ebike. The LCD is showing an error message '06 info'. Also, the temperature symbol is loading... Doyou know what it means?
Gaspard COTTIN about the the temperature you need to check the sensor, also the error 6 sometimes depend of the sensor. Try to disconnect the Throttle or other stuff one be one and check if you have other error.
My Ebike 48v so can i put battery 60v? My controller on board write 48v/60v so it can burn motor and controller? Pls help me Thank you for your answer me. Thanks advanced.
60v is the limit your controller can handle BUT do not buy a 60v battery as you will burn your controller, buy a 52v battery, a 52v battery at full charge is about 58v
Hi. I have the KT60SVPRK-SLS02G controller. I am trying to find out how to modify the settings. Specifically if i can change the low cut off voltage to suit my lipo battery pack. Also i would like to know if the auto voltage detection works well and if there are any tricks when connecting. I want to be able to use two different battery configurations with the controller. 16s lipo (nominal 3.7V max 4.2V) i then want to be able to make the same battery pack into an 8s 2P (or just 8s: no P:). This way i can use the bike for either high speed on the road or low speed high power for climbing off road mountains. Ps. can this controller charge the battery via regen?
Thanks for this video! You nailed my dellema right from the start of this video! P5 is factory set on my kit to 48v and today had to pedal home literally dying lol when the power cut off with 3 bars showing! !! I'll try the 15v like you mentioned Big Thanks! !
My display stops showing mph when I'm coasting. Is this correct, or might it be defective? Seems to me it is essential to know your downhill speed. Also, this might be the reason that my mileage is wrong, I go further than it indicates even though I have the correct wheel diameter setting.
IT should show your speed at all times. The motor/wheel is connected to your controller and your controller is connected to your LCD. It is important to program the correct wheel size, but that will have no bearing on that issue. I have checked the Kt-LCD3 against my Garmin GPS computer and the difference in mileage has never been off more than 2/10th of a mile. Maybe something is wrong with your LCD. If you decide to replace it, think about upgrading to the SW-900. The Kt-LCD3 was introduced as a 24v/36v controller while the SW-900 was introduced for 48v. Good Luck.
When I fitted my new lcd display and controller I followed the parameters settings that the supplier sent but I could not get the motor to run. I went into a pedalec forum and was recommended to set no2 in p parameters to either 5 6 7, which worked perfectly.
Help!My KT_LCD5 (with 48v 1000watt motor), top line (TM) flashes and I can't reset. Used to work, but now can't change at all. How do I reset to default?
Directly from the manual: After power on for 5 seconds, hold up and down arrows at the same time, single trip riding time (TM) and single trip distance (DST) flash, hold power button shortly, the content of both is cleared. If failed holding the power button within 5 seconds, it will automatically return the display interface after 5 seconds, original content is preserved.
hello, i bought an lcd 7 to replace my broken up old one It works in general but when i pedal my bike it won’t even turn the motor on, it’s weird because my walk function works
@@colton167 hey, I changed the internals off the old broken one into the new and it worked, this is due to both monitors having different configurations, they are the same, but the new one was not configured to my bike
What would the P5 setting be for a Battery48V 14Ah Li-ion battery with Panasonic cells? I have the sondors fold x and the kt lcd3. I have been trying to set it up, i set the P5 setting to 15 and it didnt show any battery so i set it back to 0. Also the spedometer doesnt work anyone know why?
It doesn't have a setting for 52v, but you can run a 52v battery with this, however you may not get a fully accurate reading of your batteries capacity.
If I had a manual to check I wouldn't need to find the info on TH-cam So while I don't expect you to explain stuff like sine wave settings there are others that you just skipped over so I don't even know what questions to ask about my battery or motors or controller if I had the opportunity . You just read the manual
The battery will drive the motor, no problem. The problem is your controller. Make sure your controller can handle the extra voltage. Many times controllers are designed to handle more power, but some of the cheaper ones will burn out. So check your specs
Thanks, I'll see if I can get to C10 on my KT-LCD5. Bought a new display and while throttle works, pedal assist doesn't ... so it goes! @@AugustineEBikes
AUGUSTINE E-BIKES 2019 hello I just got an ecotric 26”fatty, I have S900 lcd computer I saw videos of the SW900 and as you know I have 12 Program’s and I was following along with your video and I’m very interested to know what it did to the bike’s performance.would you be able to send me the information,video and programming for my bike I believe it is a 2018 .
So there's a password I think three blinking numbers on my display but I never set a password ever in my life so what can I do to reset it if I can't get into it? can I desolder something on the main board inside or something other than hooking it up to another screen because I don't have another one or the cable. There must be something you can can do .... unsolder or remove from the PCB on the inside of controller and or lcd5 screen that will erase everything on it and start fresh no??? Or since I never set a password what would a default password be on this stupid thing??
As you turn the monitor on 5 seconds in, hold the up and down buttons and then it'll display your max speed you want, Just accept that and hit the power key. After that, it should hopefully show you if you want the imperials in C or F, as well as Miles, or Kilometers. Just choose the up and down arrows for which one you want. Then just hit the power key and you should be set! It should be a F instead of a C as well as Miles instead of Kilometers hopefully! Hoped this helped!
Where do you buy your ebike parts from. It seems that EVERYTHING I order gets individually shipped from China and I have to wait over a month for each component. Does anyone in the US store these parts?
i'm supersized they don't have a security setting. go in the store you set a password and the bike goes in major re gen mode cant be ridden . major battery charge till a pass word is entered.
Don't EVER put a password on your LCD. If you forget the password, your LCD is now complete junk. There is NO WAY to reset your password on these LCD's.
Hi there, I purchased a BPM bike online and though I have been satisfied with the bike, I found the LCD display wanting. I called BPM and they could not provide me with any further information on the LCD display other than the options to choice amongst 1) Max Speed; 2) Wheel size; 3) Voltage and 4)kph/mph. The generic display has the 5 section battery life indicator on top like all King display, pedal assist levels, etc. Aside from the four configurable functions I mentioned, there were nothing else! There were no option to lite the display for night riding, clock, etc. So, I am puzzled as to the LCD displays you have been talking about, with what could be up to 25 functions!? I didn't expect option for light as there were no light connected to the bike, but this is far below basic as I expected. My question is, can I replace the LCD display to something with more function or is the display tied to the controller so I could not simply upgrade the display? I have been looking online everywhere but couldn't find any help, maybe you could offer some enlightenment then. Thanks.
In order to replace your LCD you would have to make sure that it is compatible with you controller. The best thing to do is to purchase a good LCD that comes with a compatible controller making sure that it is the same voltage and wattage of your battery and motor. You should be able to find them easily for under $50. The SW-900 is a good choice, readily available and works with multiple voltages.
Is anyone active in here anymore! I need help with my bike. I have a 1700w bike with a 17.5ah 48v battery and bought a spare battery that is 17ah 48v. When I place my spare battery in it dies in power 5 setting or above 1300w. Is this battery sag my guy told me the controller or original battery is set to 40amp and most batteries only handle 30amp what settings can I change I tried C5 to 8 and C12 to 2 but still happens. Not sure if I’ve damaged battery but I have no issues until I use thumb throttle and get peak power
No good to me as my electric e bike is a roahog all I’m getting is 15 Miles an hour it’s supposed to do 25 to 30 I don’t know how to program it did not get instructions I’ve tried Internet I tried here I don’t know what to do
Here is the manual for LCD-3 display: www.topbikekit.com/LCD3-User-Manual.pdf. The very first setting on page 17 or 18 under General Settings is the Maximum Speed. Set this to the max setting of 72 km/h that way the bike will run unrestricted.
all KT displays are compatible with all KT controllers, you have to make sure the connectors are the same though, some displays/controllers have the normal SW connectors while others have the WP connectors
So basically, don't change anything unless you have a manual. Very informative!
you can find good manuals online as PDF's, just search 'KT controller parameters manual'
Exactly
hello I have a question, the display does not show the battery status, the battery is full, the engine works only on the display, no bar
Cheers mate! You helped fix my battery problem. The battery was full, but the monitor was reading an empty. It did show the bars and they was draining, but overtime, it was draining just too fast. I was able to see the temperature for the controller as well! So i'm set and able to read it!
Hi sorry please could you help me my bike is 36v 250w motor in regards to the VOL setting is this setting to indicate how much battery is left or isit voltage control to the motor? My default value on setting 1 is not 31.5 but 10 please could you explain what VOL is
what you are missing is the fact, that when you press up and down 10 seconds after turning display on, it will bring you to maximum speed settings. If you press it for example 1 minute after turning on display - it will not bring you to those settings, but will allow you to reset distance since the last reset.
Bellissimo video con spiegazioni chiare ben dettagliate che mi hanno permesso di configurare il mio LCD 3. Grazie complimenti.
English plz
Hi can you change a fat tire ebike 36v 10amp 5oow the controller for that ebike is 36/48v to a 48v motor thank you
Meu display travou , ele fica mostrando 555 você consegue mexer nesses números ,mais não vai pra outras funções , o que devo fazer para destravar ou desbloquear?
This is critical for making a purchasing decision.
(05:05) If the motor manufacturer doesn't respond to inquiries (almost ALL of them will NOT respond to user emails) but you know the electrical specifications of the motor (watts, amps, etc), are the P1 settings obvious and we can still program the unit? OR...does it require knowing proprietary manufacturer codes to set for given motor electrical specification values and we're out of luck when manufacturers don't respond?
(e.g. for 750W motor enter "3", for 1000W motor enter "5" and so on).
If it requires entering codes, rather than actual specification data, is there documentation anywhere that translates motor electrical specifications to the required codes?
Hello.... First thanks for videos very helpfull..
I have a 12000w e-bike with the ukc1 display... Im going to install the app to use with the Bluetooth.... I saw that is as different driving modes as boost and others that i dont remenber the names... I like to understand that because sometimes when i brake she gives a jump forward... Can you give a litlle hellp?? Thanks a lot
Hi buddy I really appreciate your videos on all e-bike rides and information. Do you think you can do a video on the display screen for the kristall rx20 electric folding bike please I want to know how to use the settings on the screen please
LCD81F how do you put the speed on every pass, like pass 1 it use 20% batt, pas 2 40% pas 3 60% pass 4 80% 5 100% ??? i can not find it anymoreq, i can not get into that mode again, can you help me ?
What's the point of "check your manual" what manual are you talking about?
many kits dont come with manuals unfortunate, thankfully the people that do have manuals have created PDF's that you can find with a simple google search, just look for KTLCD3 Parameters Manual and you should get PDF's as your first and second result
I have a KT-LCD7. Throttle works at zero but the pas and cruise I can't find. I did EVERYTHING in the directions. My milage is set at zero and won't change while riding.
Hallo I have Et. Cycle F720 from Germany.it has a Das Kit c7. but with my Das kit C7 I cannot change the settings (especially I cannot change the speed settings for my throttle) . if I buy Das kit c6BBT or Das kit c7BBT will it work with my ebike. Please let me know.
What is the voltage input of display, doest it work with 5vdc ?
Great descriptions and a levelheaded approach to programming.. Helped a lot with my new controller. Do you happen to have a wiring diagram for a 1200w Risunmotor controller? KT36/48VPRL-SLSO2G They dont send a wiring diagram with their controller. I am an electrical contr. and just need the ID of the terminals. thanks much
Amazing.. Please can do on DX-D (with one "M" button display). Ancheer ebike
Hi
I changed the old damaged BLDC controller with the new one (KT-48ZWSRL)
I also had the 6 wires for the Hall sensor, didn’t connect the white one.
If I go in „walk“ mode (long press of down button) the motor is rotating but if I use throttle nothing is happening.
Some advice?
My pedal assist inexplicably stopped working in a schwinn e bike. I have the manual and says almost nothing about using the lcd panel.
I have NCM Milano with Das Kit controller in U.K. if I sop in high gear starting is near impossible as there is no throttle (UK law). In walk mode the power is maximum but speed is limited to 3 mph. Is it possible to reprogrammed to a higher speed so that I can get started and change down gear?
Hi i just brought a new A20 there is some issues with the lcd diplay when i turn on and starting to throttle automatically lcd go off
I think , your video is an awesome video that's exactly what I'm looking for someone to explain it to me from the very beginning . because that's exactly who I am a beginner. but you keep saying referr to manual on the motor is that what you're referring to??
hi i have a 2000w motor 60v battery and would like to know if all i would have to do is upgrade the lcd to increase the 72 kph restriction?
🚨 *Very nice channel*
Need help with azhar and askgo scooter p settings or hard reset
Hi can you run a 48v battery off this screen because I've tried it and both of the screens I had of burnout they still turn on but they won't work the machine and it's only a 36v kit what I've been told there 36 to 48 V screens football full of burnt out
Thought this was going to show where your settings should go on different battery sizes
Hi mr.why my display ebike go off after same second ?
What about if I forgot the password mate any idea to unlock
I have 48v battery going to bump up to 52 volt battery will my lcd display handle it
Hi
I hope you can help.
I have got 48v 1000w ebike with throttle battery display. I have purchase a lcd screen to connect but there is no connection to conection. I try to weld to the same wire colour but can't use throttle anymore.
My question is Can i use anther lcd or just have to use throttle power signal display?
Hi I would love you to do a tutorial on the M5 lcd
Hey I have an issue with my bike the lcd and everything works the throttle is not responding , all wires look fine not sure what to do! I have videos to show what I mean
I got a csc 48v 1500watt can you please tell me what my p1 and p2 should be ? To go fast as possible
How do you turn on the lights on the bike?
Can you damage the motor by inputting wrong tire size on display?
i have a cheep ebike its my first i started to try and fugure out the setting now the battery runs out in like 30 min i cant find anything that said reset or factory setting can you help
Informative video thanks - Is there any way of changing the wattage that is applied with each PAS level - if that makes sense - for example my PAS level 1 applies 50-120w of power, PAS2 120-220w, PAS3 220-350w, PAS4 350-420w and PAS5 420-520w - my motor was a 350w but it failed, I now I have a 250w and I am a bit concerned that PAS5 will decrease it life span as the other one failed after 14 months.
No, there isn't.
Yes,you can mix the C5 and C4 to lower the power respectively
Hi I have a gogobest gf600 I need the parameter settings for it ihad an error code so I switched it off and back on it cleared the error but my settings have all changed I need the parameter settings to reinstall
How do I reduce the voltage from 48v to 30v Brainpower Motor Controller
Little late to the party but I'll try anyway. I currently have a 36v battery running on the KT-22a - 36v/48v- 500/750W. My question is what will happen if I upgrade to a 48v battery? Simple math pushes the Watts to 1056 will the controller limit the Watts?
The controller will use the same current. Why are you trying to limit the Watts? To protect your motor? You can restrict the Current output of the controller using the C5 parameter, which will restrict the Watts in a similar fashion. Setting C5 to 10 will divide the Max Current by 1.10. Setting to 8 will divide by 1.15, 7 by 1.2, 6 by 1.25, 5 by 1.33, 4 by 1.5 and 3 by 2.0.
Hi pal, thanks for the video it was just what I was looking for, but could not find anywhere. I was messing about with my LCD and upset the factory settings, and was unable to find instructions on how to reset my computer, until I found your video. I am delighted with myself after seeing your video I reset my computer on my Zipper Z6 36V e-bike. I think in the US its called the Archer e-bike! You are a scholar and a gentleman.
From John in Ireland... 13th July 2022.. (I have a question, my bike has just walk assist at 6 mph, can this be changed to full power on my thumb drive?)
Thanks in advance.
have a problem with this display when I turn on this screen appears with 4 0000 and I cannot make it work because I do not know the code can you help me please?
Alexandre Costa
Hi, really nice video. I have a question, i buyed a 36v 500w Hub motor, and the controller doesn´t have a connection to a LCD panel so i can control the level of the power of the motor. Do you know a solution to have it incorporated somewhere?
The reason, is that the PAS always goes to full power on the motor, and sometimes i don´t need that, i need just a smooth assistance of the motor.
Hey Alexandre,
You would have to buy a new controller that comes with an LCD or LED that will work with your 500w motor. The good news is that if you match the voltage and the wattage for your motor, there are plenty of great options under $60 that will really help you out and allow for PAS. Let us know what you come up with. Cheers!
Is there a way to increase the LCD timeout settings? I believe the current default is 5 minutes. Wipes out your trip statistics if you have to stop for longer than 5 minutes. Thanks!
no there is no way to change timeout settings, the best way you can calculate your total distance for a single trip is to write it down every time you stop then add them together for your total
I have a 1500W motor Ebike .And I really need a 48v that will get up to 72V .The one I had for it is a SW900 LCD E-zBike display but I have tried to order this two times and they never send me the right one.So do you know just who I can order this one I really need or just one that will do the 48v Up to 72V that only my 1500W motor will work with?????
Does the KT LCD-5 have the same functions as the KT LCD-3 and do you program it the same way?
Good question. I have only tested the KT LCD-3. I would be curious what features the 5 has
My battery says that the cut off voltage is 36v , however my motor cuts off when the battery reaches about 46v. Any ideas as to what the problem is ?
Please help me, my throttel not run , im buy new throttel but not run again how to fix my problm ?
Hi this was of great help thanks ! dont suppose you could recomend some decent mudguards for my fat tyre bike please ? as im struggling to find some .; thanks !!!
hello, i have yose power 36v 350w kit and theyre batery 36V10.4Ah E-bike Pedelec Li-ion battery downtube Bottle Lithium battery. i want to know the setting for my bike but i cant find it anywhere, would u be able to help me ??
Did you have istruction about display? Unfortunately on my disply it s hapen this:
When is on ask me the pin but i don t have, someone says me it impossible and i ve to buy another display
You can suggest me where can i find instruction
if it is asking for a pin the LCD may have a password enabled, unfortunately there is no easy way to bypass the password without buying a new LCD, you can try to unlock it but its easiest to just get a new one
On the display I see this : motor position sensor fault ! what is mean ?
hello thanks for the video, a question this screen serves for a golden motor brand engine, this motor has to connect screen and pedaling sensor is 36v will this screen work?
I have a KT-LCD display and I have a 48V battery that is suppose to show up to 58.8V but the battery only shows 53.6V fully charged and it cuts out at 33.6V. The P5 on the settings was set at 12, and I understand that is suppose to be for a 36V battery system. It is really suppose to be set at 15, for a 48V Battery system or "0". Are you suppose to change the C10 setting to "Yes" to make changes on the display?
Did you find any answers? This depends a bit on your battery chemistry and if your batteries are working as they should. I have blown 2 cells in my lipo packs due to 1st time a bad balance connector and 2nd time vibrations and rubbing on the bike. After this the cells can go dead short so the other cells do not see them just as if there was only a straight wire there. Then if you charge without balancing or without checking you are getting a balance voltage on all of the cells you can be overcharging the other cells as the blown battery cell is no longer there to absorb it's share of the voltage. Then you end up with a battery pack that is 3.6V lower for each blown cell also you will be damaging the pack and risking a fire each time you try to charge.
This can confuse the controller.
your battery is 48v means 13sX3.7. So the max voltage you can get is around 13sx4.2=54.6. You lcd shows it correctly
48v battery should not show 58v in any case. 54v is the maximum
a 48v battery maxes out at around 54v, a 52v battery maxes out at 58v
I can't get into my event setting I think my manufacturer designed it only has basic speed wheel size etc
I am not sure what LCD unit I need. I have a 20" front-wheel-drive 36V 750W motor & powered by a 36V 20ah ion-lithium battery ( I am new to this so can you please help me)
typically KTLCD3 and KTLCD8 work the same on KT controllers, LCD8 is better though, it has a full color display and is able to show you all the settings at once
How do u reboot it ?
Anyone know what parameter settings I should use if I use it with a Bafang BBS02B 750w mid drive 48 volt? Originally used the KT-LCD3 with rear hub 1000w.
Hey hey I would like to thank you for your assistance on how to program my LCD display I just reprogram and now I'm doing every bit of 45 miles to Highway thank you I was only doing 15 miles per hour big difference thank you for your assistance
Hey, thx for the vid. I got a problem on my ebike. The LCD is showing an error message '06 info'. Also, the temperature symbol is loading... Doyou know what it means?
Gaspard COTTIN about the the temperature you need to check the sensor, also the error 6 sometimes depend of the sensor. Try to disconnect the Throttle or other stuff one be one and check if you have other error.
My Ebike 48v so can i put battery 60v? My controller on board write 48v/60v so it can burn motor and controller? Pls help me Thank you for your answer me. Thanks advanced.
60v is the limit your controller can handle BUT do not buy a 60v battery as you will burn your controller, buy a 52v battery, a 52v battery at full charge is about 58v
Hi. I have the KT60SVPRK-SLS02G controller.
I am trying to find out how to modify the settings. Specifically if i can change the low cut off voltage to suit my lipo battery pack.
Also i would like to know if the auto voltage detection works well and if there are any tricks when connecting. I want to be able to use two different battery configurations with the controller. 16s lipo (nominal 3.7V max 4.2V) i then want to be able to make the same battery pack into an 8s 2P (or just 8s: no P:). This way i can use the bike for either high speed on the road or low speed high power for climbing off road mountains.
Ps. can this controller charge the battery via regen?
On the controller it says it is a 60V (i'm guessing nominal which is around 16s lipo) 45A low voltage cut is 50V. Display is the KT-LCD6
I think there is an auto voltage detect for lower voltage batteries but if not i would like to be able to change the setup for different voltages.
How do you reboot a KT-LCD1????
Thanks for this video! You nailed my dellema right from the start of this video! P5 is factory set on my kit to 48v and today had to pedal home literally dying lol when the power cut off with 3 bars showing! !! I'll try the 15v like you mentioned Big Thanks! !
Jay Klepacs Hey , Did that work for you ? Setting it to 15Volts
My display stops showing mph when I'm coasting. Is this correct, or might it be defective? Seems to me it is essential to know your downhill speed. Also, this might be the reason that my mileage is wrong, I go further than it indicates even though I have the correct wheel diameter setting.
IT should show your speed at all times. The motor/wheel is connected to your controller and your controller is connected to your LCD. It is important to program the correct wheel size, but that will have no bearing on that issue. I have checked the Kt-LCD3 against my Garmin GPS computer and the difference in mileage has never been off more than 2/10th of a mile. Maybe something is wrong with your LCD. If you decide to replace it, think about upgrading to the SW-900. The Kt-LCD3 was introduced as a 24v/36v controller while the SW-900 was introduced for 48v. Good Luck.
Thank you so much for taking the time to share your expertise with me. It is greatly appreciated.
Your wheel speed sensor magnet is probably misaligned.
I have the same problem when coasting , I was wondering if there something in the parameters settings to correct this.
When I fitted my new lcd display and controller I followed the parameters settings that the supplier sent but I could not get the motor to run. I went into a pedalec forum and was recommended to set no2 in p parameters to either 5 6 7, which worked perfectly.
Help!My KT_LCD5 (with 48v 1000watt motor), top line (TM) flashes and I can't reset. Used to work, but now can't change at all. How do I reset to default?
Turn off Battery. Disconnect from the controller, wait 5 minutes and reconnect. It should go back to factory defaults.
I might have missed it ... did you say how to clear the trip odometer?
Directly from the manual: After power on for 5 seconds, hold up and down arrows at the same time, single trip riding time (TM) and single trip distance (DST) flash, hold power button shortly, the content of both is cleared. If failed holding the power button within 5 seconds, it will automatically return the display interface after 5 seconds, original content is preserved.
hello, i bought an lcd 7 to replace my broken up old one
It works in general but when i pedal my bike it won’t even turn the motor on, it’s weird because my walk function works
Did you get it to work having same problem.
@@colton167 hey, I changed the internals off the old broken one into the new and it worked, this is due to both monitors having different configurations, they are the same, but the new one was not configured to my bike
No info on how to factory reset the thing. I have 555 screen flashing and no option to go anywhere from there or to leave the page.
Thank you very helpful
What would the P5 setting be for a Battery48V 14Ah Li-ion battery with Panasonic cells? I have the sondors fold x and the kt lcd3. I have been trying to set it up, i set the P5 setting to 15 and it didnt show any battery so i set it back to 0. Also the spedometer doesnt work anyone know why?
hi would this kit be ok for 52v,thanks
Yes
I have a weird issue where my temperature is - 31 F when it's actually 91 F outside... Any ideas why?
I have never had that problem. Clearly the internal sensor is not working. It is not something you can program.
Mabe in c centigrade like in Europe. Look to change temperature displey settings Fahrenheit or centigrade.
My LCD screen has never come on what can i do?
Hi
At my Bike the Motor Start workin After 1 or 2 Meter . Give it a setting to Make it start instandly if i Start pedeling?
Set the P4 setting to 0
AUGUSTINE EBIKE STORE 2018 ok will try it later ty
Ciao volevo sapere me xche nn mi funziona la velocità quando cammino con la bici nn mi fa vedere la velocità
Good job.
Does it works with 52v battry as well?
It doesn't have a setting for 52v, but you can run a 52v battery with this, however you may not get a fully accurate reading of your batteries capacity.
Ok if I have a 36v with 750w motor what ah on the battery do I need?
The AHs determines your range. The higher the AH the greater your range.
for a 36v kit you need a 36v battery, the batteries AH will determine your range
If I had a manual to check I wouldn't need to find the info on TH-cam So while I don't expect you to explain stuff like sine wave settings there are others that you just skipped over so I don't even know what questions to ask about my battery or motors or controller if I had the opportunity . You just read the manual
Hi can i use 48v battery for 36v hub motor?
The battery will drive the motor, no problem. The problem is your controller. Make sure your controller can handle the extra voltage. Many times controllers are designed to handle more power, but some of the cheaper ones will burn out. So check your specs
how do i reset to fsctory default
Thanks, but no restoration to defaults after disconnecting and waiting.
C10 is automatic restore default settings mode. Press Y
Thanks, I'll see if I can get to C10 on my KT-LCD5. Bought a new display and while throttle works, pedal assist doesn't ... so it goes!
@@AugustineEBikes
AUGUSTINE E-BIKES 2019 hello I just got an ecotric 26”fatty, I have S900 lcd computer I saw videos of the SW900 and as you know I have 12 Program’s and I was following along with your video and I’m very interested to know what it did to the bike’s performance.would you be able to send me the information,video and programming for my bike I believe it is a 2018 .
Thank you for your help 🙈
So there's a password I think three blinking numbers on my display but I never set a password ever in my life so what can I do to reset it if I can't get into it? can I desolder something on the main board inside or something other than hooking it up to another screen because I don't have another one or the cable. There must be something you can can do .... unsolder or remove from the PCB on the inside of controller and or lcd5 screen that will erase everything on it and start fresh no??? Or since I never set a password what would a default password be on this stupid thing??
How do you change from C degree to F degrees?
I'm trying to figure out the same thing on LCD 3. Stuck on C.
As you turn the monitor on 5 seconds in, hold the up and down buttons and then it'll display your max speed you want, Just accept that and hit the power key. After that, it should hopefully show you if you want the imperials in C or F, as well as Miles, or Kilometers. Just choose the up and down arrows for which one you want. Then just hit the power key and you should be set! It should be a F instead of a C as well as Miles instead of Kilometers hopefully!
Hoped this helped!
My screen keeps saying……Info 1……. What does this mean.
Where do you buy your ebike parts from. It seems that EVERYTHING I order gets individually shipped from China and I have to wait over a month for each component. Does anyone in the US store these parts?
Greg, it may or may not be the parts you're after, but I sell controllers, LCD screens, etc and am located in the US. :)
Lunacycles
How do I get it open to get water out of it
Screws on back
i'm supersized they don't have a security setting. go in the store you set a password and the bike goes in major re gen mode cant be ridden . major battery charge till a pass word is entered.
Don't EVER put a password on your LCD. If you forget the password, your LCD is now complete junk. There is NO WAY to reset your password on these LCD's.
Necesito saber como arreglo mi bicicleta eléctrica pedego? En el display d la pantalla me sale error 16. Y no me acelera. Podría alguien ayudarme
Hi there, I purchased a BPM bike online and though I have been satisfied with the bike, I found the LCD display wanting.
I called BPM and they could not provide me with any further information on the LCD display other than the options to choice amongst 1) Max Speed; 2) Wheel size; 3) Voltage and 4)kph/mph. The generic display has the 5 section battery life indicator on top like all King display, pedal assist levels, etc.
Aside from the four configurable functions I mentioned, there were nothing else! There were no option to lite the display for night riding, clock, etc.
So, I am puzzled as to the LCD displays you have been talking about, with what could be up to 25 functions!? I didn't expect option for light as there were no light connected to the bike, but this is far below basic as I expected. My question is, can I replace the LCD display to something with more function or is the display tied to the controller so I could not simply upgrade the display?
I have been looking online everywhere but couldn't find any help, maybe you could offer some enlightenment then. Thanks.
Cav1stlt hey man I have a bpm and all I do for light is gold the + button and it turns on. I’m trying to figure out how to set the top speed
In order to replace your LCD you would have to make sure that it is compatible with you controller. The best thing to do is to purchase a good LCD that comes with a compatible controller making sure that it is the same voltage and wattage of your battery and motor. You should be able to find them easily for under $50. The SW-900 is a good choice, readily available and works with multiple voltages.
Is anyone active in here anymore! I need help with my bike. I have a 1700w bike with a 17.5ah 48v battery and bought a spare battery that is 17ah 48v. When I place my spare battery in it dies in power 5 setting or above 1300w. Is this battery sag my guy told me the controller or original battery is set to 40amp and most batteries only handle 30amp what settings can I change I tried C5 to 8 and C12 to 2 but still happens. Not sure if I’ve damaged battery but I have no issues until I use thumb throttle and get peak power
How do keep it in full throttle mode with out having to leave it in the settings menu display on all the time???
My system shutdowns even when charge of 2 points exista Mine is a 36v battery and p5 is set to 15 and sstill it happens
p5 at 15 is for 48v batteries not 36v
The shops in Amarillo Texas wont help unless you bought it from them
Setting the maximum speed doesn’t do anything. So why bother setting it?
No good to me as my electric e bike is a roahog all I’m getting is 15 Miles an hour it’s supposed to do 25 to 30 I don’t know how to program it did not get instructions I’ve tried Internet I tried here I don’t know what to do
Here is the manual for LCD-3 display: www.topbikekit.com/LCD3-User-Manual.pdf. The very first setting on page 17 or 18 under General Settings is the Maximum Speed. Set this to the max setting of 72 km/h that way the bike will run unrestricted.
Do this display fit to any controller I mean does all the 48v 1500w controller take lcd display?
all KT displays are compatible with all KT controllers, you have to make sure the connectors are the same though, some displays/controllers have the normal SW connectors while others have the WP connectors