Yes Sir it is possible, try the same way, or else download pdf manual for the model you have, the procedure for Reset the unit is mentioned in the manual
I have another question, after installation the gates foto sensors are not stopping the gate, but I can hear a clicking sound in them, but gates are continuing to move and won't stop, any recommendations wht9can be done to fix that? Cheers!
Yes photosensor is working fine, but board in not receiving signal sent by photosensor, so it seems wrong connection, short the safety device terminals on board, if it works then connect photosensor wires at same terminals, hope it will solve problem
Brother i have explained i the video about how to adjust the speed, you said you facing too much down then you need to adjust the stop limit with LN key that comes with the new barrier, or if you want to adjust the speed, there is a apeed switch on the board, adjust from there, also download manual/book for this barrier and read the instructions.i hope you got it
A key is used to close and open manually, on the barrier body there is a key hole, insert key in it, by rotating the key you can open, close and lock the barrier arm. Hope my reply help you👍
Great video, worked for me perfectly 👍🏻
My pleasure🥰
👍👍 good job brother
Thank you brother
@@alsubhanmedia brother u suggesting in one another video regarding coping codes from remote to remote that trick not working
@navindersingh2659 it works brother, but a little bit tricky
@@alsubhanmedia can u tell us brother
Hi mate. One question, if I want to reset all keys( a lot of guys own without right) how to proceed? It is possible?
Yes Sir it is possible, try the same way,
or else download pdf manual for the model you have, the procedure for Reset the unit is mentioned in the manual
I have another question, after installation the gates foto sensors are not stopping the gate, but I can hear a clicking sound in them, but gates are continuing to move and won't stop, any recommendations wht9can be done to fix that? Cheers!
Yes photosensor is working fine, but board in not receiving signal sent by photosensor, so it seems wrong connection, short the safety device terminals on board, if it works then connect photosensor wires at same terminals, hope it will solve problem
removed the short wire from connector 70 to 72 it will work . Hope it helps you
@renatod.9615 thanks for sharing the information
can i use different remote to program it to open the door ?
Yes possible try
Thanks for the good information
How many remote is possible?
128 Remotes With Clonix, without clonix around 45 Remotes are possible
Great job
Thank you
Thank you !!
You are welcome
veray nice brother
Thank you brother
@@alsubhanmedia bro please one video for led light, i was sow in your page but that is not full video
@@hanifsiraj7908 what kind of issue you are facing with LED lights, it is just connection on board and finxing on the Arm/Boom of barrier
@@alsubhanmedia brother i am facing the two much down, how can i adjust speed setting,
Brother i have explained i the video about how to adjust the speed, you said you facing too much down then you need to adjust the stop limit with LN key that comes with the new barrier, or if you want to adjust the speed, there is a apeed switch on the board, adjust from there, also download manual/book for this barrier and read the instructions.i hope you got it
Very nice
Thank you👍
Same barrier in my office but it's close automatically, how to set manual on/off
A key is used to close and open manually, on the barrier body there is a key hole, insert key in it, by rotating the key you can open, close and lock the barrier arm.
Hope my reply help you👍
@@alsubhanmedia could I Access manually in remote?
@@rasheed4296 yes with remote you can open & close the barrier also
How to set automatically open and close
Thanks
Welcome brother👍
👍
Sir mujhe boom barrier remote kit chahiye 5 set
+971 56 3970 910 Whatsapp
You need remotes, or Clone device to increase the capacity
Bhai jumper Kyu lagaate hai
2 points ko short krny k liay bhai
Hlo
Hi
@@alsubhanmedia ❤️