‪@ciro3d_goldstrike3d‬

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 ธ.ค. 2021
  • Get yours here - shrsl.com/3afe7
    ‪@ciro3d_goldstrike3d‬ Brand new STREAK trunk light with Lightstrike Technology! Tons of flash patterns to get the attention of everyone around you! Full install. Easy plug and play and add some much-needed light to the back of your bike! Works on ‪@harleydavidson‬ Ultra, King & Chopped Tour packs and ‪@Advanblack‬ King, Chopped & Razor tour packs.
    #sikbaggers #ciro3d
    🔴GET SOCIALISTIC
    🔗My LINKTREE - linktr.ee/sikbaggers
    🔗Facebook Group SIK Baggers - bit.ly/38GRKgI
    🔗Instagram - bit.ly/2HwBZge
    Steve's Favorite Motorcycle Must-Have Tools!
    Master Hex/Torx Set - www.amazon.com/dp/B083Q5WZHS?...
    Swivel Head Ratchet - amzn.to/3MYeMEw
    Milwaukee M12 Ratchet - amzn.to/3VSR6W4
    M12 Battery - amzn.to/3gweokl
    M12 Charger - amzn.to/3Srrb53
    Ratcheting Wrenches (Metric) - amzn.to/3CQanyS
    Ratcheting Wrenches (SAE) - amzn.to/3Tt6iaY
    Blue Medium Loctite (Your Bikes Best Friend) - amzn.to/3gwdK6p
    FT LB Torque - amzn.to/3VON5SH
    IN LB Torque - amzn.to/3F4wCUA
    Vise Grip Plier Set - amzn.to/3TYZUs0
    Motorcycle Funnel Set - amzn.to/3sP9HFz
    Belt Tension Gauge - amzn.to/3FiiXco
    Noco Boost Plus Power Bank/Jumper - amzn.to/3W1squO
    As an Amazon Associate, I earn a very small commission from qualifying purchases. Thank you for your support and for helping our channel grow!
    #sikbaggers #harleydavidson
    🔴GET SOCIALISTIC
    🔗Facebook Group SIK Baggers - bit.ly/38GRKgI
    🔗Instagram - bit.ly/2HwBZge
    🔗My LINKTREE - linktr.ee/sikbaggers
    🎵All Music is Licensed Through www.epidemicsound.com
    VIDEO DISCLAIMER:
    This video is for educational purposes only. By watching and engaging with this content, you acknowledge and agree to the terms outlined herein. The information presented is for general educational purposes and does not constitute professional advice or create a professional-client relationship. Any actions taken based on this information are at your own risk. Neither the creator nor the channel shall be liable for any consequences of your actions. Exercise caution, use personal judgment, and seek professional advice when necessary. The content may not be accurate, complete, or up-to-date. You are responsible for complying with all laws and regulations in your jurisdiction. By continuing to watch, you release the creator and the channel from any liability. This disclaimer applies to all future content and interactions. Confirm your agreement by proceeding to watch.
  • ยานยนต์และพาหนะ

ความคิดเห็น • 129

  • @stuartberke5845
    @stuartberke5845 ปีที่แล้ว +1

    Great job Steve. Really enjoyed that. Stuart. 👍

    • @sikbaggers
      @sikbaggers  ปีที่แล้ว

      Thank you8 Stuart!

  • @genxloner
    @genxloner ปีที่แล้ว

    Looks awesome. Well done

  • @petedetects7012
    @petedetects7012 2 ปีที่แล้ว

    Dang bro, you do such a good job showing step by step installs . I really appreciate that .

  • @diondejesus3146
    @diondejesus3146 11 หลายเดือนก่อน

    Love the videos shopping around for lights you a great help. Thanks for the video.

  • @emeryhvac1023
    @emeryhvac1023 2 ปีที่แล้ว +2

    Steve I love how you mentioned " I drilled through the bottom as my preference " 350 times so you'll limit your you tube trolls from explaining to you what the directions say lol. Great video buddy. Thanks

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว +1

      Thank you Emery...yeah man, these days you have to or ill spend all day reading comments about it, you're right lol Thanks for checking it out!

  • @patsamples6452
    @patsamples6452 2 ปีที่แล้ว

    As always another great and informative video. Thanks Steve

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว

      You're very welcome and thank you for checking it out! Happy Holidays to you and yours!

  • @streetglideclyde8403
    @streetglideclyde8403 2 ปีที่แล้ว +3

    Another great video. I like that you make people feel comfortable with drilling on their plastics! Looks good. I’m a fan of more and more lights to grab other driver attention.

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว +2

      Hey Clinton! Yes sir, its not too bad...I understand the first few times I drilled or cut on my bags I was a nervous wreck but ive done so many now that I just grab it and start drilling lol never had an issue with paint cracking or any other mishap...the surrounding paint is pretty tough. And yes...LED's are a must, in my opinion on any motorcycle.

  • @jasonbreedlove495
    @jasonbreedlove495 2 ปีที่แล้ว +1

    Love the video and the light. Ciro is doing some great stuff, and I'm so looking forward to the updated version of the latitude taillights with this tech. Keep up the good work.

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว +1

      Hey Jason...yeah that would be cool if they started putting the lightstrike in all the rear lights. Thanks for checking it out! Be safe!

  • @paulkeitz7215
    @paulkeitz7215 2 ปีที่แล้ว

    This instruction video is awesome. Greta tips and tricks for the light installation. I like the idea of drilling through the bottom of the tour pack, looks very clean.

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว

      Glad the video helped Paul! And yes sir I dont deviate from Ciros instructions very oftem but this, to me, was much cleaner.

  • @bobmilo2786
    @bobmilo2786 2 ปีที่แล้ว

    You and Ciro hit it out of the park here. I watch another guys video. His was good. Yours is outstanding as usual buddy. Top shelf.

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว

      Hey Bob thanks for checking it out man! Have a wonderful Christmas!

  • @michaelterry885
    @michaelterry885 2 ปีที่แล้ว

    Cool product very detailed video as always brother appreciate what you do for us happy holidays to you and your family

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว +1

      Hey Michael! Thanks man..much appreciated sir. Happy Holidays to you and yours as well!

  • @youcanthide004
    @youcanthide004 3 หลายเดือนก่อน

    KILLER💥💥💥

    • @sikbaggers
      @sikbaggers  3 หลายเดือนก่อน +1

      thank you!

  • @Rollandchill
    @Rollandchill 2 ปีที่แล้ว +1

    Hey Steve! So good to see you doing another instructional video. Man, you are The Best! I bought my first motorcycle ever earlier this year; a 2015 Road Glide Special. It looked so 'square' when I first bought it. Man, I knew NOTHING about motorcycles. I was afraid at first to get down and work on my bike. But watching your videos on TH-cam has given me the confidence to work on my bike. Also Advan Black has scored; I've spent several hundred dollars on custom accessories. My two favorite pieces are the stretched gas tank covers and the stretched side panels. Thank you for your dedication to the Harley Davidson Touring community.

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว +1

      Hey Victor...thank you for the kind words my friend! Im glad that I could help you there! It just takes some confidence and some basic tools and you can wrench on these.

  • @tomlewis2467
    @tomlewis2467 2 ปีที่แล้ว

    That. Is. Awesome!!
    This is now on my list.
    1st time seeing a post from you. Great help, thank you...but, if you do the rallys, I would still pay you to do such a great job! Rubber down, my friend

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว

      Thank you Tom! Actually Ciro does the rallies and will install anything you buy there for free! We will be at Spring Daytona and also at Sturgis this year but wont be working...just doing meet and greets at Ciro and Advanblack Booths.

  • @joerupert4660
    @joerupert4660 2 ปีที่แล้ว

    Great video

  • @michiganborn8303
    @michiganborn8303 2 ปีที่แล้ว +1

    I appreciate the fact right from the get-go you point out this can fit a Advanblack 2014 or newer tour pack and not wait till half way through the video to mention that.
    👍

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว +1

      Hey Joe, Right on! Yes I wanted to clear that up front because I knew people would ask, will it fit this? will it fit that? and Ciro made it very clear what it fits.

  • @justanotherviewer52
    @justanotherviewer52 2 ปีที่แล้ว

    Thanks Steve. As soon as I win the lottery I will buy a newer model as nothing (well, not much anyway), from CIRO fits my 2013 FLTRU.

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว +1

      Hey DED...yeah I know.. it's a bummer that the 13 and down don't like LEDs and need all sorts of load equalizers to work properly..hopefully, someone will get it figured out and make it more streamlined and easy for the end-user to install and run LEDs on those bikes.

  • @robertogonzalez6971
    @robertogonzalez6971 2 ปีที่แล้ว

    Very nice light, I like your idea drilling the hole on the bottom, to bad it doesn't come with the same color as the bike.

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว +1

      yeah most light wont come color matched but rather chrome or black...but at the end of the day it lined up nice and installed very easy...and sure adds some much needed light back there.

  • @cfergieride1
    @cfergieride1 2 ปีที่แล้ว

    I like the light functions but the light itself is pretty fugly... the advanblack tour pack light has my attention 👌 😍

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว +2

      Thanks for checking it out Chris...Im actually waiting on my Advanblack Smoked light to get here to install it with this light. I think it will look much more streamline with both rather than just the one.

  • @airtexaco
    @airtexaco 9 หลายเดือนก่อน

    Great video, thank you! Got an Advanblack King Tour Pack for my Indian Challenger. Now to see if it will plug and play. Popular light, they are out of stock.

    • @sikbaggers
      @sikbaggers  9 หลายเดือนก่อน

      the light wont be plug and play as it is for HD ...I know they have some for goldwing ...just not sure they have ventured into indian yet.

  • @dennisberg570
    @dennisberg570 2 ปีที่แล้ว

    So much for the quick release , now theTour Pack is thethered to the bike . Other than that , thanks for the video , very well done and you make it look so easy which builds my confidence on other installs , drilling hoes , making wiring plugs etc .

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว

      yeah, anything you attach to the tour pack is going to tether it to the bike but the plugs ciro has are quick release once you have them pinned. It's just another step to loosen the seat bolt and unclip it and then remove your tour pack. Glad the videos have helped!

  • @alessandrobonomi3890
    @alessandrobonomi3890 ปีที่แล้ว

    Hi, very great video... I have a question: my tour pack is detachables.. when i leave it, what can I do for the wires connected directly under the seat.. there would need a connector just outside under the tour pack.. there is way to solve this problem???

  • @brentsnoddy1951
    @brentsnoddy1951 ปีที่แล้ว

    Head's up Trikers! So, after two lights and a replacement (troubleshooting) Y-harness from CIRO, I am finally up and running. Be aware that the Y-harness does not connect to the black plug jack as demonstrated in some of these installation videos. The plug jack you need to use is in the rear just in front of the tour pack on my 2022 Trike. I am not sure if this is true for earlier year Trikes. Ciro tech mentioned that it may be by the suspension adjustment. On mine there was a plug jack there but it was the grey one and not the black which is a different sized plug anyway. Hopefully this helps out Trikers. Thanks for the video SIK. The tips for the 5 wires helped. Stay safe!😁

    • @sikbaggers
      @sikbaggers  ปีที่แล้ว +1

      Thank you for the heads up Brent! Just saw this as youtube stuck it in my "held for review" for some dumb reason...but thats great info and thank you for sharing it!

  • @donniebell862
    @donniebell862 2 ปีที่แล้ว

    Awesome video Chris!!! Raydar

    • @donniebell862
      @donniebell862 2 ปีที่แล้ว

      Sorry I got ur name wrong!!!

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว

      Hey Donnie! Thank you for checking it out...and no worries on the name, ive been called much worse in my days lol have a good one!

    • @donniebell862
      @donniebell862 2 ปีที่แล้ว

      @@sikbaggers i have Advanblack razor tourpack, will this work with the razor tourpack? Raydar

    • @donniebell862
      @donniebell862 2 ปีที่แล้ว

      @@sikbaggers will this light fit on the Advanblack Razor tourpack?

  • @ryanm8456
    @ryanm8456 2 ปีที่แล้ว

    I wish they would have had this before I put the one on the king tour pack.

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว

      Yes this is brand new from Ciro...really cool light.

  • @chrisg2k1
    @chrisg2k1 ปีที่แล้ว

    I think the Harley style wrap around is way better looking anyone agree

    • @sikbaggers
      @sikbaggers  ปีที่แล้ว

      there are several wrap around on the market, HD, advanblack, custom dynamics...they all wrap around the base...I like that ciro was thinking outside of the box and made a slimmer version option that mounts to the lid. Its not everyones cup of tea...so im glad we have options outside of buying everything from HD.

  • @FIREHDSTREET
    @FIREHDSTREET ปีที่แล้ว +1

    Is there a quick disconnect on the lights if you remove the tour pack?

  • @firesquad0155
    @firesquad0155 ปีที่แล้ว

    I watched the other video I do have a question should you pull the main fuse before unplugging anything

  • @jeffhennings6015
    @jeffhennings6015 2 ปีที่แล้ว

    Like that might add one have a 2020 ultra

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว +1

      Hey Jeff thanks for checking it out...it is super bright for sure. Adding some much needed light to the read of the bike. Have a merry christmas!

  • @medcook57
    @medcook57 2 ปีที่แล้ว

    Wish they made those parts for pre 2014

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว +1

      Yeah 13 and down dont like to play with LEDs very well needing load equalizers and such to make them run properly. Hopefully someone will figure it out and make it more streamline for the end user to use and install.

  • @daroyalpythons1887
    @daroyalpythons1887 2 หลายเดือนก่อน

    Wish you would do more with trikes

    • @sikbaggers
      @sikbaggers  หลายเดือนก่อน +1

      Im trying..I dont get that many any here..next weekends video will be a full brake job on a freewheeler.

    • @daroyalpythons1887
      @daroyalpythons1887 หลายเดือนก่อน

      @@sikbaggers thats awesome

  • @marco-tiopet4020
    @marco-tiopet4020 2 ปีที่แล้ว +1

    👍

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว +1

      Thanks for checking it out Marco!

  • @karaokekid7189
    @karaokekid7189 8 หลายเดือนก่อน

    Can I run this light with other rear Custom Dynamics lights?

  • @js-amg
    @js-amg 2 ปีที่แล้ว

    Thanks Steve. I was wondering if the turn signal wire can be disconnected without any faults or errors due to the turn light being red and not amber which in some countries by law have to be amber only. Unless of course Ciro can change the color. Thanks.

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว

      I dont think it will throw any codes because you are just daisy chaining the lights so you still have power and turn runnign to your main lights. You should be just fine.

  • @0873sp
    @0873sp 4 หลายเดือนก่อน

    Hey Steve. I have a question. What do you do if you have the CD magic strobe already installed for your other lights on your bags and filler panels. How do you wire this up?

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน

      Hey Scott...super easy..Since this has kind of the same thing built into it you definitely dont want to run the magic strobe through it. The magic strobe is just an in line connection. You connected your brake box in between the connections under your seat to your main rear lights. So the power goes through the brake box and then goes to your lights. If you ad this you will ad it before the brake box. So power from the bike, through the splitter for this light, then through the brake box and back to your main lights in the rear. Anything you in the harness before the box will not be affected by the box. Anything you connect after the brake box will do what the brake box tells it to do. Think of it as one big line of harness from the bike to the rear lights and you have access to install things in that line. This one should be install at the biggening of that line and brake box after that. All of these lights have splitters, one side in and one side out. I really hope that helps...if not let me know and maybe I can shoot a short video of it somehow

  • @kdoty1100
    @kdoty1100 2 ปีที่แล้ว

    Hi, really liked the video. Question: does it look like the other housing on the light be painted to match the bike? Just curious.

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว +1

      Im guessing if you can paint it without disassembling anything you can...There is really no way to disassemble this but rather mask it off and then paint it.

  • @scottwoldt7588
    @scottwoldt7588 2 ปีที่แล้ว

    Is there a way to add a quick releases? My tour pack has a quick release and I often take the pack off to clean.

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว +1

      yeah pop the seat off and unplug it..if youre taking your pack off for cleaning then its just one more screw and the seat comes off.

  • @coreysanfordsr.8294
    @coreysanfordsr.8294 2 ปีที่แล้ว

    Awesome!!! Great video. Can you put this light on if you have Custom Dynamics products installed?

    • @marcmo7138
      @marcmo7138 2 ปีที่แล้ว

      He says in the video if you have a strobe box of a different brand you need to plug this light in before the strobe box, hope that helps.

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว +1

      yes what Marc said..you can always run LED's of other brands together however if it is the brake box that you are talking about it will need to be installed before the brake box so this light doesnt flash. That is what the lightstrike technology is...it does the flashing all controlled through the app.

    • @marcybarnett1955
      @marcybarnett1955 2 ปีที่แล้ว

      Just installed this great light!!! I'm having a problem with app. When I turn bike off. It resets my settings. What could the problem be?

    • @BT-ih6kr
      @BT-ih6kr 2 ปีที่แล้ว

      i like this idea. i used to run an LED third brake light off a chevy astro van attached to the bottom of my '07 trunks. that no longer fits on the '19 one i have now. i have the custom dynamics box that allows me to have the run/brake aspect on my signals well as the multi flash on the brakes. (this is a Canadian bike and there might be some difference in the harness, i would have to check. ) i don't want 2 different types of flashes happening. if i leave it to just normal on/off, can i plug it in after the custom dynamics box and would that control the flashing?

  • @chiefjoseph8154
    @chiefjoseph8154 ปีที่แล้ว

    Is a wiring harness available for the Challenger?

    • @sikbaggers
      @sikbaggers  ปีที่แล้ว

      Noit sure youll have to call Ciro

  • @steveg1122
    @steveg1122 2 ปีที่แล้ว

    Curious if this would work with Canadian bikes as our have a different wiring schematic than US bikes
    I'm always leery about buying electrical/lighting because of this

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว +1

      absolute great question! However I would call ciro and ask as its not specified on the website.

  • @jerryflores5976
    @jerryflores5976 18 วันที่ผ่านมา

    Hey....!! I have a street glide 2015 the I add a trunk from a fried, i would like to know if the wire harnesses will work on this bike so I can order thx.

    • @sikbaggers
      @sikbaggers  15 วันที่ผ่านมา

      yeah itll work on a 14 and newer

  • @brentsnoddy1951
    @brentsnoddy1951 2 ปีที่แล้ว

    Followed the mfg instructions and this video for my 2022 Tri Glide. Checked and rechecked the wiring on the pins and still cannot get it to come on. IDK if there is a separate fuse for this power line. I'll try troubleshooting with Ciro if they offer this. :>(

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว +1

      Yeah give Ciro a call and they will help you...they have great techs!

    • @brentsnoddy1951
      @brentsnoddy1951 2 ปีที่แล้ว

      @@sikbaggers Thanks SIK, that was the plan. Stay safe brother!

  • @crewgadjy
    @crewgadjy 2 ปีที่แล้ว

    Is the back of thr unit flat. I want to mount one on the top box ( non Harley Style.) on my Dyna. Forget it I want one withe legal Amber indicators.

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว

      No, it is curved slightly to the shape of the pack.

    • @crewgadjy
      @crewgadjy 2 ปีที่แล้ว

      @@sikbaggers yeah, though so.

  • @caseylang4664
    @caseylang4664 2 ปีที่แล้ว

    It probably tells you to go through the front because not everyone has detachable tour pack.

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว +1

      Absolutely and I swear I said in the video and I cropped it out ...this was a long video and I was trying to cut down size and I did, I cropped that out. That's m y bad but your correct!

  • @toddarnold9222
    @toddarnold9222 2 ปีที่แล้ว

    Been told this will not work on a '21 CVO Ultra ?

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว +1

      Their fitment guide states 14-up touring models including:
      Electra Glide® Ultra
      Ultra Limited
      Electra Glide® Ultra Classic
      CVO Limited
      CVO Road Glide® Ultra and Road Glide® Ultra
      ‘14-up Harley® Tour-Pak lids, including Ultra, Chopped and King Tour-Pak

  • @michiganborn8303
    @michiganborn8303 2 ปีที่แล้ว

    Hey Steve,
    Question:
    Will this Streak tour pack light be able to work in in conjunction with the Advanblack Reaper tour pack light and still be able to only have one wire to come out from under the tour pack to connect under the seat?
    So in other words, would it be able to daisy chain Ciro with Advanblack inside the tour pack under the liner?
    I would also be super stoked if that power animation could work on both lights if connected in the proper order.
    Thanks in advance.

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว +1

      Hey joe...unfortunately not...both lights have the 6 pin connector and have to be split up under the seat.

    • @michiganborn8303
      @michiganborn8303 2 ปีที่แล้ว

      @@sikbaggers
      Okay thanks.
      I ordered the Reaper light and mentioned something about side lights.
      Do you have any more information on those?

  • @marcybarnett1955
    @marcybarnett1955 2 ปีที่แล้ว

    Bought and installed this light! App not working. The lights reset everytime you turn ignition on and off. I deleted app was going to put it back on my phone and now I can't find app! I have an android phone. Any help please!! My setti gs are not staying locked on bike.

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว

      If you ever have issues with ciros stuff give them a call. Their techs are top-notch and will help you. I called yesterday and found out there was a mishap on the app store and they were taking care of it. I would check back to see if it's fixed.

  • @uliseshectorhernandez6868
    @uliseshectorhernandez6868 2 ปีที่แล้ว

    Are they planning to start making for older models????

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว

      Im not sure...the issue with bikes older than 2014 (86-13) is that they dont have the technology in them ecm to adjust for LED lights. Needing load equalizers installed on every single light. We will have to wait and see.

  • @badmojomotorsports.4922
    @badmojomotorsports.4922 2 ปีที่แล้ว

    Have you done anything on Ciro Tac-10 light cannons yet?

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว +1

      Hey Scott....no sir not yet. We had discussed adding them to the road glide because they are all black but I haven't heard anything back on those yet.

    • @ciro3d_goldstrike3d
      @ciro3d_goldstrike3d 2 ปีที่แล้ว +1

      @@sikbaggers Hey Scott, we're still waiting on the TAC-10 with 1 1/4" Bar Mount set, as soon as we get those, we'll be getting a set to Steve to review!

  • @raywashington9674
    @raywashington9674 2 ปีที่แล้ว

    do you have any videos of changing a speed sensor on a 2000 roadking

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว +1

      Hey ray I sure dont man..im sorry.

    • @raywashington9674
      @raywashington9674 2 ปีที่แล้ว

      @@sikbaggers no problem thank you anyway. i have to replace mine and trying to save a few bucks by doing it myself.

  • @pengyG10
    @pengyG10 ปีที่แล้ว

    so what do you do when you don't ride with your tour pack all the times??? is there a clip that you can disconnect it?

    • @sikbaggers
      @sikbaggers  ปีที่แล้ว

      Disconnect it from the harness.

    • @pengyG10
      @pengyG10 ปีที่แล้ว +1

      @@sikbaggers I have advanblack hyper saddle bag LED lights on my CVO SG what do I need to adapt the Ciro 3d streak tour pack light for To chopped pack? is there a connector that the 2 different brands will link up to the bike?

  • @MrSmitty005
    @MrSmitty005 2 ปีที่แล้ว

    Hello how are you doing? I like the light set up on the tour pak. I have the cropped tour pak from ebay not harley. But will it still work. Sounds like a dumb question. Same size tour pak as harley cropped tour pak. And where can I buy it.

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว

      Hello MRSmitty Never a dumb question sir..However, Ciro will not guarantee fitment on any tour pack outside of a Harley tour pack. So that being said if you buy the light and it doesn't fit they will not refund the money. They were very clear with me on that when I asked about this because I knew it would come up.

    • @MrSmitty005
      @MrSmitty005 2 ปีที่แล้ว

      @@sikbaggers ok and thank you very much sir. Keep up the door work and videos

  • @donzollars8187
    @donzollars8187 2 ปีที่แล้ว

    Question?????
    What is the difference between the ultra tour pack and king tour pack?

    • @rickyhawkins7407
      @rickyhawkins7407 2 ปีที่แล้ว +1

      Ultra tour pak has lights on it that function as running or brake lights. King pak has lights on the bottom sides but not on the rear. They function and lights up when the bike is powered up, but so not flash, nor function as brakes lights.

    • @donzollars8187
      @donzollars8187 2 ปีที่แล้ว

      @@rickyhawkins7407
      Thanks I was wondering if one was larger then the other.

    • @kirkwb
      @kirkwb 2 ปีที่แล้ว

      @@rickyhawkins7407 Not all King tour packs have lights on the bottom. Mine has plastic strips that were chrome coated to fill in the space. Just saying.

    • @rickyhawkins7407
      @rickyhawkins7407 2 ปีที่แล้ว +2

      @@donzollars8187 the King and Ultra are the same size.

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว

      No difference...the king is usually a pack that ahs been added after and is quick detach. When its referred to as the ultra pack it is hard mounted. (not quick detach) However that can be converted to quick detach as well.

  • @Irobot12z
    @Irobot12z 2 ปีที่แล้ว

    Antennas dont fit after??

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว

      dont fit what?

    • @Irobot12z
      @Irobot12z 2 ปีที่แล้ว

      @@sikbaggers I would like the antenna to go back into its position the light dont seem to have the room to do that

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว

      @@Irobot12z Where is your antenna now?

    • @Irobot12z
      @Irobot12z 2 ปีที่แล้ว

      Forget it thanks anyway

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว

      @@Irobot12z just trying to help but your not being very specific

  • @behindrudysfairing4954
    @behindrudysfairing4954 2 ปีที่แล้ว +1

    Is it me or is there no sound?

    • @sikbaggers
      @sikbaggers  2 ปีที่แล้ว +1

      something was goofed with the video...its all fixed now.

  • @Kashmirknight
    @Kashmirknight ปีที่แล้ว

    Jesus christ people.....talk about how to overthink a brake light.

    • @sikbaggers
      @sikbaggers  ปีที่แล้ว

      its called customization

    • @Kashmirknight
      @Kashmirknight ปีที่แล้ว

      @@sikbaggers Its still just a light. I guess it will look cute (i mean custom) when its parked in the garage.