The left and right want necessarily backwards, if installed with wiring exiting to the left (opposite of direct in video), left and right would have been correct. Keep that in mind when you decide which direction you need the wires to go.
For anyone looking to use their trailer plug - the wiring is on the plug cover on the truck and the light bar comes with the wiring guide. Most colors match, only one that didn't was red (reverse) went to grey on truck. If it's not working at first, make sure the ground is securely sliced, I used the taps and it didn't work initially, then I clamped again and everything works perfect now.
I tried your codes but you didn't have any videos for the strips only bars. I won't buy anything else from this company. Steer clear if you value your money and time.
These light strips look awesome I just installed mine and that reverse light is sick bright 😊 I did mine same way except I had mine facing the right way lol. I think these give your truck a really classy look. Ford should do these factory install. I would urge everyone to go get a test light because every model is different on the wiring diagram. Depending on your year your trim your model 4X4 2x4 it's "All" different. Ford just can't leave it simple with the wire colors for the same on every pickup but unfortunately they don't.
Trailer light wire is always green for right blinker yellow for left and brown for running lights white is ground. You did not install correct light strip correctly. Pig tail is to be on the left side (Drivers Side).
2016 Ford F150 - Standard Key (VIN 10th Digit: G) Last Update: 10/8/2018 Click Here To Submit Info About This Vehicle WireSheet Help & How-To Links: - HOW TO PRINT A CUSTOM WIRESHEET - POLARITY DEFINITIONS CLICK HERE TO SEE IF A T-HARNESS IS AVAILABLE FUNCTION COLOR | POLARITY LOCATION
REMOTE START & POWER Print Section ? Constant 12 volts WHITE/RED (10A) AT OBDII/GATEWAY MODULE BLACK 24 PIN CONN, PIN 13 * click to view image Ground - CHASSIS GROUND
Ignition #1 WHITE/ORANGE IGNITION SWITCH HARNESS BLACK 7 PIN CONN, PIN 1 click to view image Accessory #1 VIOLET/GREEN (+) IGNITION SWITCH HARNESS BLACK 7 PIN CONN, PIN 6 click to view image Starter #1 BLUE/WHITE IGNITION SWITCH HARNESS BLACK 7 PIN CONN, PIN 7 click to view image Fuel Injector (-) GREEN/BLUE, GREY/YELLOW, VIOLET/GREY, YELLOW/ORANGE, BROWN, GREEN/WHITE, GREY/BROWN, or VIOLET/ORANGE AT ANY INJECTOR 2 PIN CONN, PIN 1
Ignition Coil (-) NOT VIOLET or BLACK/VIOLET AT ANY IGNITION COIL 2 or 3 PIN CONN. PIN 1 or 2
Brake Pedal VIOLET/WHITE (+) BRAKE SWITCH OR BCM BLACK 22 PIN CONN, PIN 1 * click to view image Parking Brake WHITE/VIOLET (-) PARKING BRAKE SWITCH OR BCM 52 PIN CONN, PIN 47 * click to view image Rear Defrost BROWN or BROWN/BLUE (- LATCHED) PASSENGER KICK PANEL 17 PIN CONN, PIN 9
Keysense BLUE/GREY (+) IGNITION SWITCH HARNESS BLACK 7 PIN CONN, PIN 5 click to view image MS CAN High GRAY/ORANGE AT OBDII/GATEWAY MODULE BLACK 24 PIN CONN, PIN 23 click to view image MS CAN Low VIOLET/ORANGE AT OBDII/GATEWAY MODULE BLACK 24 PIN CONN, PIN 22 click to view image HS1 CAN High WHITE/BLUE AT OBDII/GATEWAY MODULE BLACK 24 PIN CONN, PIN 20 click to view image HS1 CAN Low WHITE AT OBDII/GATEWAY MODULE BLACK 24 PIN CONN, PIN 19 click to view image Immobilizer Type - TRANSPONDER - SEE DIAGRAM #239
KEYLESS ENTRY CONTROL Print Section ? Lock GREY/YELLOW (-) DRIVER DOOR MODULE 24 PIN CONN, PIN 20 #201
You had the light bar upside down
The reason why the colors were wrong was because you put it on backwards. But it looks great and was very helpful
Yeah, I was thinking the same thing when he was explaining it. He kinda slow. Lol
Was the right blinker going when the left was on possibly due to you having the light strip upside down? I.e. flipped the light strip around
Yeah, that was it :O
Don’t tell people to switch wiring lol. Turn it upside down!
2:38, you might have the led strip backwards. Thats what i had trouble with just a sec ago
Got a link for the lights
www.amazon.ca/gp/product/B07KRRFYCC/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1
Yep, upside down. Flip it over and you would be fine.
The left and right want necessarily backwards, if installed with wiring exiting to the left (opposite of direct in video), left and right would have been correct. Keep that in mind when you decide which direction you need the wires to go.
For anyone looking to use their trailer plug - the wiring is on the plug cover on the truck and the light bar comes with the wiring guide. Most colors match, only one that didn't was red (reverse) went to grey on truck. If it's not working at first, make sure the ground is securely sliced, I used the taps and it didn't work initially, then I clamped again and everything works perfect now.
I tried your codes but you didn't have any videos for the strips only bars. I won't buy anything else from this company. Steer clear if you value your money and time.
What did you use to mount over the bracket that keeps the tailgate from swaying? It’s an extra piece yours has for the tailgate step.
I have the same and you have the light bar flipped the wrong way. If you put the wires on the left then it is what the instructions show. 😎😎
Just bought one of the light strips as a gift and it doesn't work properly. Disappointed
These light strips look awesome I just installed mine and that reverse light is sick bright 😊 I did mine same way except I had mine facing the right way lol. I think these give your truck a really classy look. Ford should do these factory install. I would urge everyone to go get a test light because every model is different on the wiring diagram. Depending on your year your trim your model 4X4 2x4 it's "All" different. Ford just can't leave it simple with the wire colors for the same on every pickup but unfortunately they don't.
He made fun of the "Chinese" for labeling the wires wrong. I'm thinking maybe flip the bar around, but what do I know, I'm just a girl. 🤦♀️
he did put it wrong way lol, I have same leds though need to wire in taillights
How did you mount the strip on the right side where those tailgate alignment bolts are in the way?
I went right over them (loosely)
Trailer light wire is always green for right blinker yellow for left and brown for running lights white is ground. You did not install correct light strip correctly. Pig tail is to be on the left side (Drivers Side).
What’s that light info?
www.amazon.ca/gp/product/B07KRRFYCC/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1
LOL Love the sticker on window
How is acting your cross traffic alert???
perfectly, no change whatsoever
Dies this Truck have the towing package ?
yes
Thank you! it really works your video was really helpful I did on F150 XLT and works great! Thank you again.
Keep
Why wouldn't you just flip the led strip instead of worrying about the re-wiring??
I have one in my Ram 1500, some of the LED of the running strip dont work, any idea? 5 of them dont light up
I bought one of these for my buick century haha
Do you think maybe you put the light on the wrong way lol
Thanks for the video. Really helped. Have a 2020 F150.
Is this the same for a 2019 f150
Like your stickers 😊
What year is your king ranch? I have a 2016 and I'm wondering if the same colors wires apply for mine
2019
Did you get the trailer attached notification on dashboard when using the trailer plug ?
I'm about to use the trailer plug will I get a warning and can you just shut it off?
I putt-tap on every 2016 F150 LARIAT and not able to figure out which color wire for which. :(
2016 Ford F150 - Standard Key (VIN 10th Digit: G)
Last Update: 10/8/2018
Click Here To Submit Info About This Vehicle
WireSheet Help & How-To Links:
- HOW TO PRINT A CUSTOM WIRESHEET
- POLARITY DEFINITIONS
CLICK HERE TO SEE IF A
T-HARNESS IS AVAILABLE
FUNCTION
COLOR | POLARITY
LOCATION
REMOTE START & POWER
Print Section ?
Constant 12 volts
WHITE/RED (10A)
AT OBDII/GATEWAY MODULE BLACK 24 PIN CONN, PIN 13 *
click to view image
Ground
-
CHASSIS GROUND
Ignition #1
WHITE/ORANGE
IGNITION SWITCH HARNESS BLACK 7 PIN CONN, PIN 1
click to view image
Accessory #1
VIOLET/GREEN (+)
IGNITION SWITCH HARNESS BLACK 7 PIN CONN, PIN 6
click to view image
Starter #1
BLUE/WHITE
IGNITION SWITCH HARNESS BLACK 7 PIN CONN, PIN 7
click to view image
Fuel Injector (-)
GREEN/BLUE, GREY/YELLOW, VIOLET/GREY, YELLOW/ORANGE, BROWN, GREEN/WHITE, GREY/BROWN, or VIOLET/ORANGE
AT ANY INJECTOR 2 PIN CONN, PIN 1
Ignition Coil (-)
NOT VIOLET or BLACK/VIOLET
AT ANY IGNITION COIL 2 or 3 PIN CONN. PIN 1 or 2
Brake Pedal
VIOLET/WHITE (+)
BRAKE SWITCH OR BCM BLACK 22 PIN CONN, PIN 1 *
click to view image
Parking Brake
WHITE/VIOLET (-)
PARKING BRAKE SWITCH OR BCM 52 PIN CONN, PIN 47 *
click to view image
Rear Defrost
BROWN or BROWN/BLUE (- LATCHED)
PASSENGER KICK PANEL 17 PIN CONN, PIN 9
Keysense
BLUE/GREY (+)
IGNITION SWITCH HARNESS BLACK 7 PIN CONN, PIN 5
click to view image
MS CAN High
GRAY/ORANGE
AT OBDII/GATEWAY MODULE BLACK 24 PIN CONN, PIN 23
click to view image
MS CAN Low
VIOLET/ORANGE
AT OBDII/GATEWAY MODULE BLACK 24 PIN CONN, PIN 22
click to view image
HS1 CAN High
WHITE/BLUE
AT OBDII/GATEWAY MODULE BLACK 24 PIN CONN, PIN 20
click to view image
HS1 CAN Low
WHITE
AT OBDII/GATEWAY MODULE BLACK 24 PIN CONN, PIN 19
click to view image
Immobilizer Type
-
TRANSPONDER - SEE DIAGRAM #239
KEYLESS ENTRY CONTROL
Print Section ?
Lock
GREY/YELLOW (-)
DRIVER DOOR MODULE 24 PIN CONN, PIN 20 #201
Unlock
VIOLET/GREY (-)
DRIVER DOOR MODULE 24 PIN CONN, PIN 10 #201
Driver Door Unlock
BLUE/GREEN (-) > (+)
BCM BLACK 36 PIN CONN, PIN 27 *
Trunk Release
BROWN/YELLOW (-)
AT BCM 40 PIN CONN, PIN 14 *
LIGHTING
Print Section ?
Parking Lamp (+)
BLUE/GREY
BCM 36 PIN CONN, PIN 12 **
Parking Lamp (-)
GREY (-)
HEADLIGHT SWITCH 16 PIN CONN, PIN 11 ***
click to view image
Headlights
BLUE (-) **
HEADLIGHT SWITCH 16 PIN CONN, PIN 12
click to view image
Reverse Light
GREEN/BROWN (+)
AT BCM 36 PIN CONN, PIN 11 *
click to view image
SECURITY
Print Section ?
Horn
GREEN/WHITE (-)
HORN SWITCH OR BCM 40 PIN CONN, PIN 18 *
click to view image
All Door Trigger / Dome Light
GRAY/VIOLET (+)
BCM 36 PIN CONN, PIN 13 **
Driver's Front Door Pin
BROWN (- N.C.)
AT BCM 52 PIN CONN, PIN 33 **
click to view image
Pass Front Door Pin
WHITE (- N.C.)
AT BCM 52 PIN CONN, PIN 21 **
click to view image
Driver's Rear Door Pin
GREEN (- N.C.)
AT BCM 52 PIN CONN, PIN 46 **
click to view image
Pass Rear Door Pin
YELLOW (- N.C.)
AT BCM 52 PIN CONN, PIN 19 **
click to view image
Hood Pin
BLUE/ORANGE (- N.C.)
AT BCM 40 PIN CONN, PIN 14 **
click to view image
OEM KEYLESS INTEGRATION
Print Section ?
Lock Motor
GRAY/BROWN (-) > (+)
BCM BLACK 36 PIN CONN, PIN 35 *
Driver Unlock Motor
BLUE/GREEN (-) > (+)
BCM BLACK 36 PIN CONN, PIN 27 *
All Unlock Motor
VIOLET/GREY (-) > (+)
BCM BLACK 36 PIN CONN, PIN 32 *
Trunk Release Detection
GREEN/WHITE (+)
BCM BLACK 36 PIN CONN, PIN 33 *
OEM Keyless Module Location
-
OEM Lock Relay Location
-
BUILT INTO BCM
ACCESSORIES
Print Section ?
Window Up
D\ GREEN P\ GREEN/YELLOW D\ GREEN/VIOLET P\ WHITE/VIOLET @ EACH WINDOW SWITCH
Window Down
F/ BLUE F/ GREEN/WHITE R/ BROWN R/ GREY #211
@@Lesscoelectronics omg thank you kind sir
Is that a customize king ranch logo on that steel plate ?
you know it is!! very keen eye there my man..
you only tapped into the right tail light? how the left turn signal work if you only tapped into one side
I was wondering the same thing
He ran a single wire to the other side just for that
🤣🤣
How does the turn signal share the brake light
All vehicles work like that, the turn signal switch does that job for you!
@@Lesscoelectronics ok thanks must be wired different on uk vehicles then , our indicator is separate to the brake
Great video. What year is your truck?
It's a 2019
@@Lesscoelectronics txs for the reply. Do you know if the wiring on the tail light is the same as a 2016?
@@Lesscoelectronics 2020 ford F150 xlt does the wiring are thesame?
@@BULITAS01 I donno, never saw it, from what I hear it is though...