How to Replace Rear Wheel Bearings 2000-2007 Ford Focus
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- Buy Now!
New Wheel Bearing from 1AAuto.com 1aau.to/ia/1AAX...
This video shows you how to install the bearing on your 2000-2007 Ford Focus. A vibrating or groaning noise coming from a wheel tells you it's time to replace the bearing! This wheel bearing is a direct replacement for the bearing in your vehicle's solid axle.
This repair was done on a 2006 Ford Focus ZX4 2.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2000 Ford Focus
2001 Ford Focus
2002 Ford Focus
2003 Ford Focus
2004 Ford Focus
2005 Ford Focus
2006 Ford Focus
2007 Ford Focus
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obCk/1A...
• 19mm Socket 1aau.to/oazg/1A...
• 29 mm socket
• 34mm Socket 1aau.to/oX/1AAS...
• 3 Jaw Gear Puller
• 1/2 Inch Ratchet 1aau.to/oazg/1A...
• 1/4 Inch Ratchet 1aau.to/obz7/1A...
• 3/8 Inch Drive Ratchet 1aau.to/obXm/1A...
• Torque Wrench 1aau.to/oa4G/1A...
• Gloves 1aau.to/oaQX/1A...
• Safety Glasses
• Floor Jack 1aau.to/oart/1A...
• Jack Stands 1aau.to/oadF/1A...
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
I wonder why you wouldn't show us how to put the new bearings installed without the machine press. Anyone who has that is probably aware how to do it already.
Just wondering: if the car has enough miles that the rear bearings have given-out, is it better (and easier) to just purchase a new drum with bearing assembly already installed?
So I noticed in the video you never rotated the hub while torquing, just wondering is that necessary? I noticed when I bought new axle nuts it said torque to 174 while rotating the hub Counter clockwise a minimum of 10 times is that to just insure there is no binding
Should it be 174nM and not ft lbs? or 124 ft lbs
Why take out the bearing in pristine new rotor. I just put the new drum with bearing in the car. Why not take off the bearing from the old drum like in real life. Not everyone or nobody ever have a super clean drum of their car. 😅