don’t know what’s wrong with my 758. When selecting shutter the flash icon is also selected unlike in your vid where just ambient icon and shutter is highlighted. Pls help.
When I follow these instructions to change to aperture priority mode, the meter does not allow me to select "F", it cycle through metering modes only. What is wrong?
The interface is confusing. The short answer is: keep turning the wheel. The longer answer is: Holding down the mode button, turning the wheel first lets you go (right to left) through three different flash modes, then to ambient. From there, continue turning the wheel and you will cycle through the three ambient modes.
When I go from F to T, the ambient icon switches to one of the flash icons and the meter will not read... I can scroll back to F nd it works fine but as soon as i go to the T, it switches to flash and will not read
don’t know what’s wrong with my 758. When selecting shutter the flash icon is also selected unlike in your vid where just ambient icon and shutter is highlighted. Pls help.
Thank you for reaching out! Please get in touch with our experienced team at support@sekonic.com and they'll be able to help you out!
trust the japanese to put a T where there should be an S ,
why the "F" shows loc when it's dialled. Thanks
yesssss i got hold of one booooyaaaa
When I follow these instructions to change to aperture priority mode, the meter does not allow me to select "F", it cycle through metering modes only. What is wrong?
The interface is confusing. The short answer is: keep turning the wheel.
The longer answer is: Holding down the mode button, turning the wheel first lets you go (right to left) through three different flash modes, then to ambient. From there, continue turning the wheel and you will cycle through the three ambient modes.
@@adsteel ty i had the problem as well.
When I go from F to T, the ambient icon switches to one of the flash icons and the meter will not read... I can scroll back to F nd it works fine but as soon as i go to the T, it switches to flash and will not read
122
Will I be able to use spot meter with strobes?
Yes the spot meter works with strobes.
@@SekonicGlobal where can I find tutorials?
Why show a L758C at the end of a L758DR video?
such amazing attention to detail. you must be proud of yourself