www.SemiCasualShow.com We are starting a super cool project Mike Dilullo brought us his beautiful 1985 Peterbilt 362 and first thing we are going to do is cut it in half!!!
Definitely do a video on the frame stretch that would be most interesting. Can’t wait to see the Pete after you guys are finished overhauling it. Good luck guys and God bless!
I use to drive a 362 very similar to that, same engine but had a 13 instead of a 10, The pump had a 10 button, and the aneroid adjusted a tad all for that power. Good running truck for back in the day.
Drove a '96 362 for about 10 yrs. Loved it. The trick to driving a cabover is to put your ass on the white line! Remember you are sitting on the front wheel!! Nice 362!
All Ways!! Awesome to see a Cab Over!! Can't Wait to see the whole process and the Conversation!! Gob Bless Keep up the good work!! 🇺🇸 🇺🇸 🇺🇸 🇺🇸 🇺🇸 🇺🇸 🇺🇸 🇺🇸 🇺🇸
Looking forward to seeing the build on this beautiful cabover. And Brian, you didn't do too bad for your first time driving a cabover with a 10 speed; 6/10.
I cannot tell you how excited I am to watch this and to see the end results I have waited for this forever. Thank you so much. BUT Brian when you said now that it's not running it's a lot quieter. I lost it. I laughed so hard. That was epic. Lol. And you did a great job driving it.
When you run empty/bob tail, try using ever other gear for instant start of in third then fifth, seven, nine, ten. It will get you up to speed a lot quicker. Great video😎👍
I can’t wait to see the finished product, you guys are going knock this truck out off the park , awesome content, Paul from Fort Myers Florida, I met you guys at Wildwood and got some great merch
Aloha Guys. Thank You for that awesome video. Brian you did a decent job driving for your first time. You just need to put on some miles and time and it will only get better. Can’t wait to see the updates and progress Mahalo Brothers
Looking forward to see how this cabover turns out. Grew up in a cab over. Haven't driven one in over 20 yrs. Can you bag the steer axle on those? I think that would def help the ride.
I feel ya guys there, I run through there twice a week and those bridges are brutal on a truck with no air ride... wish they would get it paved already, its been two weeks...lol
A that's a badass high mount cabover I know you guys know on the 362 theirs a high mount and a low mount I got brought up in a hay wagon 352 truck n trailer
Hey guys...a few words of caution about bobtailing a cabover [you discovered one - bumps]. The other BIG two follows. First...sudden braking whips the tandems [tail] around and second...the same thing happens on wet roads. Back in the day I put over a million miles OTR in cabover 'freightshakers' hauling swing beef east and 'whatever' back west. For it's age that 'Pete' 362 is sweeeet and that Cummins hums nicely. It'd be nice to see the frame stretch! Cheers...
Yup, going to be a cool project 😎. Glad your going to film the cut and stretch. What about paint color? Are you asking for ideas? This will be awesome 👌🏻.
I got my cdl temps with a 87 IH 9670 cab over big cam 400 13 speed an my buddy told me the air vent on the put the outer edge on the yellow line an you’ll be fine. Don’t feel bad shifting I drove a 88 conventional IH before that and I couldn’t get use to the tight shift pattern in the cab over so I’d occasionally start in 3rd an try shifting like I started in first
A cabover is a real head turner. I’m running an ‘88 362 @2500 miles/week. Adding an air ride rear suspension will make a world of difference. But an air ride front would be like riding on a cloud. A bagged front end is in my wish list.
It’s great to see you do a cab over. Just sad that when it’s done you will have put a huge drop visor and a huge boxy blade bumper on it. Those trucks look so good and less is more. You don’t have to throw an oversized bumper under the grille and on the windshield of every truck.
Driving a cab over is ok except they’re cold as hell in the winter and they ride rough. You get tired real quick of putting on your pants and taking them off while laying down on the mattress…. Crawling over the dog house to get to the bunk sucks.
Move the grab handle to inside the cab like are euros it will look mint 👌 super single on the front 385/65 r22.5 will look mint too fill that arch with air suspension all round it will be like driving a cloud around upgrade her to disc brakes too
Nice rig!, that's not bad for your first CO drive Driver, and you had the sack to show it, ya can't listen to people like Bruce, they don't know shit from apple-butter, lol, great video guys, thanks for sharing.
Put Dual Straight Stacks On It And A 18 Speed Transmission Put That 10 Speed In The Corner . Larger Fuel Tanks . Texas Bumper . Making It Really Nice .
"Watch, I'm gonna drive this thing, get hooked and want a cabover" is exactly what happened to me 15 years ago with my dad's 92 FLA86 condo he had for the farm
You use your knee as a reference to your lane position so in your case your Left knee should line up with the road lines on the road same applies if you drive on the opposite side your right knee becomes the reference point…
There is no need to cut and weld..... the frame on these 362's is two pieces... you just unbolt the old and bolt in the new.... I used a complete frame from a 2009 with flex air.... worked like a dream... it's 252" now
![[4K직캠] BABYMONSTER(베이비몬스터) - FOREVER](http://i.ytimg.com/vi/PS3UAFto1z8/mqdefault.jpg)
No DEF, no fake stacks...... Freaking awesome
Right, that's why I can't get into watching much because I hate all that crap.
Definitely do a video on the frame stretch that would be most interesting. Can’t wait to see the Pete after you guys are finished overhauling it. Good luck guys and God bless!
Heck yah!!!!
I use to drive a 362 very similar to that, same engine but had a 13 instead of a 10, The pump had a 10 button, and the aneroid adjusted a tad all for that power. Good running truck for back in the day.
Drive with your left foot on the line. It will set you just right.
Drove a '96 362 for about 10 yrs. Loved it. The trick to driving a cabover is to put your ass on the white line! Remember you are sitting on the front wheel!! Nice 362!
This is like going back to the day you starting out at the driving school. Keep at it, your doing fine.
I can’t wait to see this I’m tuned in for this build it’s great to see you guys do something different
Love the Pete cabover. Lookin' forward to viewing all the episodes on this build as they become available.
Can't wait to see the cabover finished. I know it will be nice when yall get done.
Very cool project.. love cabovers... I bet Tim Gentry is wanting this cabover...
Finally! Thanking you guys in advance for doing a truck project other than 389’s. Can’t wait to see once it’s completed.
All Ways!! Awesome to see a Cab Over!! Can't Wait to see the whole process and the Conversation!! Gob Bless Keep up the good work!! 🇺🇸 🇺🇸 🇺🇸 🇺🇸 🇺🇸 🇺🇸 🇺🇸 🇺🇸 🇺🇸
Looking forward to seeing the build on this beautiful cabover. And Brian, you didn't do too bad for your first time driving a cabover with a 10 speed; 6/10.
Nothing better than a cabover. After air ride all around a streached and air ride cab it will be a Cadillac
that's a nice sounding old school 🏫 👌
beautiful truck 🚚
when i learned how to drive it was an 85' K100 with a 13 spd in it was an awesome truck. love the project guys
I cannot tell you how excited I am to watch this and to see the end results I have waited for this forever. Thank you so much. BUT
Brian when you said now that it's not running it's a lot quieter. I lost it. I laughed so hard. That was epic. Lol. And you did a great job driving it.
so much space between cab and engine, would be easy to make it much quieter inside.
Regardless of the turn out. This will be my favorite truck build thus far! How awesome.
It's nice to see a cabover can't wait to follow the build
Awesome video guys!
And yes it was a long ride to Tennessee with that spring ride!
Looking forward too see the progress on it
This is gonna be so cool, drove one in the 80's love to do it again. cant wait to see what you guys do to it.
Nice looking truck, this will be a good one.
Nice Cab Over guys , it's going to be one sweet ride when it's done 👍👍👍👍👍
This brings a big smile to my face!!!
When you run empty/bob tail, try using ever other gear for instant start of in third then fifth, seven, nine, ten. It will get you up to speed a lot quicker. Great video😎👍
awsome doing your first cabover Pete can't wait to see it when it is done
Can't wait to see more of this build
I can’t wait to see the finished product, you guys are going knock this truck out off the park , awesome content, Paul from Fort Myers Florida, I met you guys at Wildwood and got some great merch
Looking forward to what's to come on the cabover. I'm sure it will turn out amazing as all your work is.
Me entantan los cabover! Éxito y Bendiciones desde Puerto Rico!
Ready to see it finished keep the videos coming. Stay safe
Ready for the build journey on this one 🤘🏼🤠🤘🏼🤠
Aloha Guys. Thank You for that awesome video. Brian you did a decent job driving for your first time. You just need to put on some miles and time and it will only get better.
Can’t wait to see the updates and progress
Mahalo Brothers
Looking forward for the next one.
Awesome truck.
Regards from the Netherlands 👍
Looking forward to see how this cabover turns out. Grew up in a cab over. Haven't driven one in over 20 yrs. Can you bag the steer axle on those? I think that would def help the ride.
Awesome can’t wait to see the progress.
looking forward to see more of this truck, you should also put air ride front that will help with the rise comfort alot
I drove a k100 6yr and loved every minute of it
Really cool I’m Sure you guys will do an excellent job as always
Cool old school truck love it y'all need to put dual stack and dual breeder on this baby can't wait to see how it turns out 👍
That will look great when it is finished!
An cabover wow awesome video
Can’t wait to see it after you guys get done with it
Looking forward to see what you guys do. Glad its a Pete ;)
cool project guys. this is very interesting!
Heck yes guys. Dress that old girl up. Finally you guys get to put your touch on a classic
I feel ya guys there, I run through there twice a week and those bridges are brutal on a truck with no air ride... wish they would get it paved already, its been two weeks...lol
Looking forward to the finished product.
Can't wait for the out come....
That is a sweet pete!!! Air ride will make it sweetheart ride love the old 400 Cummings can't wait to it stretched.
A nice project!!
A that's a badass high mount cabover I know you guys know on the 362 theirs a high mount and a low mount I got brought up in a hay wagon 352 truck n trailer
would be cool to just park it right next to a conventional just to show HOW high it really is.
Hell ya updates awesome truck.
Love it
Hey guys...a few words of caution about bobtailing a cabover [you discovered one - bumps]. The other BIG two follows. First...sudden braking whips the tandems [tail] around and second...the same thing happens on wet roads. Back in the day I put over a million miles OTR in cabover 'freightshakers' hauling swing beef east and 'whatever' back west. For it's age that 'Pete' 362 is sweeeet and that Cummins hums nicely. It'd be nice to see the frame stretch! Cheers...
Will be a cool little series
I love it
Yup, going to be a cool project 😎. Glad your going to film the cut and stretch.
What about paint color? Are you asking for ideas?
This will be awesome 👌🏻.
Great Video Semi Casual From Bryer Floyd
Guys I can’t wait to see what y’all do to this ole cab over!!
Hope you try and preserve the interior as much as possible it’s in such good condition loving that steering wheel
Nice video
yes!
I got my cdl temps with a 87 IH 9670 cab over big cam 400 13 speed an my buddy told me the air vent on the put the outer edge on the yellow line an you’ll be fine. Don’t feel bad shifting I drove a 88 conventional IH before that and I couldn’t get use to the tight shift pattern in the cab over so I’d occasionally start in 3rd an try shifting like I started in first
Cab overs are sweet Big Rigs
New horns! Horns are part of the that generation 😎
A cabover is a real head turner. I’m running an ‘88 362 @2500 miles/week. Adding an air ride rear suspension will make a world of difference. But an air ride front would be like riding on a cloud. A bagged front end is in my wish list.
You can tell he is use to Automatic! If it’s a 10 speed it should be the same as other! Drop a 13speed in it😀
Now that's a real truck.
Hell ya
I would totally do a duel exhaust and breather set up
Sharp old Pete
Yes I would love to see the truck getting stretched just to see how it's done I hope you get the time to get up for some of it .
Really Cool. I want to run one with a step deck
It’s great to see you do a cab over. Just sad that when it’s done you will have put a huge drop visor and a huge boxy blade bumper on it. Those trucks look so good and less is more. You don’t have to throw an oversized bumper under the grille and on the windshield of every truck.
Driving a cab over is ok except they’re cold as hell in the winter and they ride rough. You get tired real quick of putting on your pants and taking them off while laying down on the mattress…. Crawling over the dog house to get to the bunk sucks.
Always wear that seatbelt! Cab over no hood as a buffer area 😎
Move the grab handle to inside the cab like are euros it will look mint 👌 super single on the front 385/65 r22.5 will look mint too fill that arch with air suspension all round it will be like driving a cloud around upgrade her to disc brakes too
Nice rig!, that's not bad for your first CO drive Driver, and you had the sack to show it, ya can't listen to people like Bruce, they don't know shit from apple-butter, lol, great video guys, thanks for sharing.
I need me a cabover!!!
Big Cam 3...... but all kinds of potential there... hope to see step by step videos....
Maybe a paint job, dual exhaust, and a new transmission and it would be perfect. Don’t think it needs frame stretch.
Put Dual Straight Stacks On It And A 18 Speed Transmission Put That 10 Speed In The Corner . Larger Fuel Tanks . Texas Bumper . Making It Really Nice .
"Watch, I'm gonna drive this thing, get hooked and want a cabover" is exactly what happened to me 15 years ago with my dad's 92 FLA86 condo he had for the farm
You use your knee as a reference to your lane position so in your case your Left knee should line up with the road lines on the road same applies if you drive on the opposite side your right knee becomes the reference point…
Do they still have parts for theseéeee??
What a Beut!!
Yes to the stretch filming, Please!!!!!
good shape for a truck that old
There is no need to cut and weld..... the frame on these 362's is two pieces... you just unbolt the old and bolt in the new.... I used a complete frame from a 2009 with flex air.... worked like a dream... it's 252" now
Lights in the visor
Nice! Front air ride steers?.
I was 14 the first time I drove a cabover on the big road . it was dads co4070a
Pull that big cam out and put a n14 in you won’t have to drill any holes or anything just a whole lotta wiring lol
You can put lights but leave the horns
Needs duel stacks and air breathes matching on both sides..
Love cabovver driver kw,mack ford freightliner internation
About the paint scheme....idea to put in ATS :)
Hopefully they want dual stacks.
What a Waste to cut this Truck up for stretching; it is such a Beauty to keep it Originally... PS just an Idea to use the Clutch???