Lower Control Arm - Symptoms, Diagnosis and Replacement (Clunking)

แชร์
ฝัง
  • เผยแพร่เมื่อ 11 ก.ค. 2024
  • [Parts/Tools]
    COMPATIBLE CARS: CHEVROLET EQUINOX 2005-2009, PONTIAC TORRENT 2006-2009, SATURN VUE 2002-2007
    CHEAP 2 lower control arm kit: amzn.to/3Gq7jsX
    ACDelco Professional 45D2470 OEM passenger: amzn.to/3L86icI
    ACDelco Professional 45D2469 OEM driver: amzn.to/3J15KmX
    [Ball Joints Only]
    Lower Ball Joint ACDelco 46D2259A OEM: amzn.to/330oSNe
    [Tools]
    Bravex Heavy Duty Grease Gun 6000 PSI: amzn.to/34yoLy5
    Locktite: amzn.to/3HsJMsT
    [Bushing Replacement Only]
    Heavy Duty Ball Joint Press: amzn.to/3Hs23qc
    [Misc Tools]
    Metric Wrench Set 8mm - 22mm: amzn.to/2xQn3ot
    Socket Set 123pc Metric and Imperial - Good Quality: amzn.to/2NhqhL9
    Socket Set Metric/SAE 23pc - Good Quality: www.amazon.com/gp/product/B01...
    U-Joint Set: 1/4", 3/8" and 1/2" Drive: amzn.to/3ambTvs
    9pc Socket Extension Set: 1/4", 3/8" and 1/2" Drive: amzn.to/3pnvQGz
    Helper Tools:
    Cheap 3 ton car jack stands: amzn.to/2B200bL
    Cheap 2 ton jack: amzn.to/2IJggT8
    [VIDEOS MENTIONED IN THIS VIDEO]
    How to Change a Lower Ball Joint - Replacement (Saturn Vue 2002-2010 - 46D2259A)
    • How to Change a Lower ...
    --------------
    Instagram: / tutorialgenius
    --------------
    Lower Control Arm - Symptoms, Diagnosis and Replacement (Clunking)
    The car in the video is a SATURN VUE 2007 AWD (04-07 for SATURN VUE 3.5L V6 SOHC 24V VIN CODE "4" J35 / L66). However, the procedures shown in the video will apply to most vehicles and applications.
    SUBSCRIBE FOR MORE!
    #LowerControlArm #ControlArm #SaturnVue
    --------------
    Chapters:
    0:00 Intro
    0:21 What Does a Lower Control Arm Do?
    1:27 How Do Lower Control Arms Fail?
    2:58 Symptoms Lower Control Arm of Failure
    5:15 Is My Lower Control Arm Bad?
    7:07 Should I Replace the ENTIRE Lower Control Arm?
    8:57 What Tools Do I Need?
    9:40 Lower Control Arm Replacement
    18:03 Torque Specs
    Tags:
    Bad Lower Control Arm Symptoms Diagnoses And Repair
    SYMPTOMS OF A BAD CONTROL ARM
    How to Fix a Car that Clunks (Lower Control Arm)
    How to Replace Front Lower Control Arm 03-08 Honda Pilot
    DIY Honda Odyssey Lower Control Arm Replacement
    How to Replace Control Arm with Ball Joint 99-04 Honda Odyssey
    --------------
    PART NUMBERS:
    ACDELCO 45D2469, ACDELCO 45D2470, SUSPENSIA X07CJ1171, MEVOTECH CMS50163, SUSPENSIA X07CJ1170, MOOG RK621136, MOOG RK621129, MEVOTECH CMS50164, DELPHI TC5354, DELPHI TC5221
    Video Title: Lower Control Arm - Symptoms, Diagnosis and Replacement (Clunking)
    Video File Created Date: Wednesday, 2 February, 2022 (Video may or may not have been captured on this date, it shows the date the video was last converted.)
    -- Video uploaded and managed using TH-cam Bulk Uploader for the Lazy!
    -- Manage and Auto-Tag your TH-cam videos offline... Then upload!
    -- ginkosolutions.com/youtube-bul...
    -- GinkoSolutions.com
    Video Tags:
    lower, control, arm, symptoms, diagnosis, replacement, clunking, chevrolet equinox, saturn vue, pontiac torrent, honda pilot, saturn vue 2007, lower control arm, lower control arm replacement, lower control arm bushing replacement, lower control arm noise, lower control arm symptoms, lower control arm bushing noise, lower control arm ball joint replacement, lower control arm bushing, lower control arm tool, bad control arm, 45d2470, 45d2469, cms50163, rk621136
  • ยานยนต์และพาหนะ

ความคิดเห็น • 42

  • @TutorialGenius
    @TutorialGenius  2 ปีที่แล้ว +3

    Like and subscribe for more! All parts, tools and more information in the video description.
    If this video helped you, please support the channel here: ko-fi.com/tutorialgenius
    Thanks for watching!

  • @parneypots
    @parneypots 2 ปีที่แล้ว

    Another informative video. Good job mate!

  • @maxmarker4751
    @maxmarker4751 2 ปีที่แล้ว

    Hey great videos man!! You saved my life from having to take my Vue in and spend thousands on it. Yeah it can be a pain but car parts and time are better learning experience than taking the easy way out. Appreciate it again thank you!!

    • @TutorialGenius
      @TutorialGenius  2 ปีที่แล้ว

      You're welcome! Send a Thanks our way with those thousands you saved haha!

  • @robgracia509
    @robgracia509 ปีที่แล้ว

    very well explained thank you i'm about to do this on my 2007 saturn outlook thank you again

    • @TutorialGenius
      @TutorialGenius  ปีที่แล้ว +1

      Glad it helped! Good luck. I hope you subscribe to my channel for more

  • @blackenigma1054
    @blackenigma1054 2 ปีที่แล้ว

    very good job

  • @devilsadvocate701
    @devilsadvocate701 2 ปีที่แล้ว

    Good info, once again thanks. Do wish I knew about cracking that nut when I did mine. Ended up bending it lol.

  • @SpencerWelsh-ez6xf
    @SpencerWelsh-ez6xf 10 หลายเดือนก่อน

    smooth And thorough info.

  • @xemphim11021
    @xemphim11021 25 วันที่ผ่านมา

    Best explanation and tutorial ❤❤❤

    • @TutorialGenius
      @TutorialGenius  24 วันที่ผ่านมา

      Thank you so much 😊

  • @timf2279
    @timf2279 2 ปีที่แล้ว

    Well done thank you

  • @andrewallen8764
    @andrewallen8764 2 หลายเดือนก่อน

    good video

  • @hornofgabriel0723
    @hornofgabriel0723 7 หลายเดือนก่อน

    😮❤🎉.
    Thank you kind sir.

  • @davem4131
    @davem4131 8 หลายเดือนก่อน

    I’m getting a judder through the wheel when turning stationary rough ride over road and a loose knock when hitting the brakes I’m thinking it is the control bushings worn. Had 2 subframe engine mounts done too mounts changed and suspension checked. Been a bit of a nightmare getting a mechanic to actually spend time diagnosing it so have had to do it myself 😂

  • @larrybrown2850
    @larrybrown2850 8 หลายเดือนก่อน

    Not sure if my control arm was already greased near the ball joint at the factory.

  • @arunsudharsanan7972
    @arunsudharsanan7972 2 ปีที่แล้ว

    How much it cost to replace?
    Both Lower Suspension arm pin or bush worn but not resulting in excessive movement.

    • @TutorialGenius
      @TutorialGenius  2 ปีที่แล้ว +1

      That depends on too many things! Mainly location

  • @2002erli
    @2002erli 3 หลายเดือนก่อน

    This is a K I C K. A S S. V I D E O - THANK YOU ! ! !

  • @faridsradmotors9702
    @faridsradmotors9702 2 ปีที่แล้ว +1

    The way you treat the vue it is going to last for ever

  • @michaelpaterson8086
    @michaelpaterson8086 3 หลายเดือนก่อน

    Hi Bro, my 2000 civic has a clunking noise whenever i pull away forward or reverse from a standstill or when i punch the gas pedal while coasting, theres a clunk and i feel it come through the floor, any ideas Bro?

    • @TutorialGenius
      @TutorialGenius  3 หลายเดือนก่อน +1

      It could be a number of things! How does the engine look when you do that? Could be a motor mount also

    • @michaelpaterson8086
      @michaelpaterson8086 3 หลายเดือนก่อน

      @@TutorialGenius The engine seems ok, I've replaced the 2 bottom motor mounts and the rear motor mount, the upper engine mounts appear to be intact so it's a mystery.
      Could the transmission make a clunk and and vibration too or is it likely something else? It's a manual transmission.

    • @TutorialGenius
      @TutorialGenius  3 หลายเดือนก่อน +1

      If the motor mounts are ok, then it'll probably be a U-joint or CV joint of some sort.
      I have a videos on replacing pretty much all components containing those things on this car.
      If I usually can't figure something out, I've tried a small camera under the car a few times, but usually I can get a friend to put their ear near the problem while I do some accelerations.
      You probably want a diagnosis without throwing parts at it.
      good luck!
      @@michaelpaterson8086

  • @cindynapoli7530
    @cindynapoli7530 4 หลายเดือนก่อน

    Thank you great explanation for us non mechanics. my mechanic said i need this so wanted to know what symptoms were

  • @tonyperdue
    @tonyperdue ปีที่แล้ว

    Is it likely to only make a noise when just starting to accelerate and then be fine until you stop and go again

  • @jackbrady86
    @jackbrady86 9 หลายเดือนก่อน

    I've got clunk somewhere when I hit small bumps at low speeds. Jacked it up and pulled on the wheels but no play

    • @TutorialGenius
      @TutorialGenius  9 หลายเดือนก่อน

      What did you put the jack on when you jacked it up?

    • @jackbrady86
      @jackbrady86 9 หลายเดือนก่อน

      @@TutorialGenius I put the car on jack stands

    • @TutorialGenius
      @TutorialGenius  9 หลายเดือนก่อน

      @@jackbrady86 No, i mean, where were the mounting points?

    • @jackbrady86
      @jackbrady86 9 หลายเดือนก่อน

      @@TutorialGenius right on the mounting pinch. It's a 2016 Prius.

    • @TutorialGenius
      @TutorialGenius  9 หลายเดือนก่อน

      on the body of the car? both front wheels off the ground?@@jackbrady86
      if there is absolutely no play, have you considered the mounts? engine and transmission?

  • @grilledchickenwrap
    @grilledchickenwrap 10 หลายเดือนก่อน

    Hi Great video and insights, can this sound be my lower control arm bushing ? sound is coming from my front wheel passenger side.
    th-cam.com/video/VCZmf7clrHg/w-d-xo.html