Hi. I will be using solex as my default app. This is my solex settings along with my pixhawk cube orange pins for which I have connected a three axis gimbal. In solex, (I have set the wheel settings by default to RC CH : 9 and I have connected the pitch axis of my gimbal to AUXILIARY : 1 of my pixhawk cube orange pin) and (I have assigned A short press to change the wheel settings to CH : 10 and I have connected the yaw axis of my gimbal to AUXILIARY : 2 of my pixhawk cube orange pin) and (A long press is assigned as clear wheel settings to get back to CH : 9) This all are done in solex tx app in herelink. And another thing is that A short press and A long press, both the button channels are set in as toggle button and not a momentary button in herelink original settings, so will the above setup for gimbal work as I expect ? Should I set to toggle or momentary for the A short press and A long press ?
hi could you answer a couple questios please? how did you wire your gimbal and what settings did you set on the herelink i can not get mine going if you would like myn email mioght be easier thanks
Hi. I will be using solex as my default app. This is my solex settings along with my pixhawk cube orange pins for which I have connected a three axis gimbal. In solex, (I have set the wheel settings by default to RC CH : 9 and I have connected the pitch axis of my gimbal to AUXILIARY : 1 of my pixhawk cube orange pin) and (I have assigned A short press to change the wheel settings to CH : 10 and I have connected the yaw axis of my gimbal to AUXILIARY : 2 of my pixhawk cube orange pin) and (A long press is assigned as clear wheel settings to get back to CH : 9) This all are done in solex tx app in herelink. And another thing is that A short press and A long press, both the button channels are set in as toggle button and not a momentary button in herelink original settings, so will the above setup for gimbal work as I expect ? Should I set to toggle or momentary for the A short press and A long press ?
Hi. I will be using solex as my default app. This is my solex settings along with my pixhawk cube orange pins for which I have connected a three axis gimbal. In solex, (I have set the wheel settings by default to RC CH : 9 and I have connected the pitch axis of my gimbal to AUXILIARY : 1 of my pixhawk cube orange pin) and (I have assigned A short press to change the wheel settings to CH : 10 and I have connected the yaw axis of my gimbal to AUXILIARY : 2 of my pixhawk cube orange pin) and (A long press is assigned as clear wheel settings to get back to CH : 9) This all are done in solex tx app in herelink. And another thing is that A short press and A long press, both the button channels are set in as toggle button and not a momentary button in herelink original settings, so will the above setup for gimbal work as I expect ? Should I set to toggle or momentary for the A short press and A long press ?
Hi. I will be using solex as my default app. This is my solex settings along with my pixhawk cube orange pins for which I have connected a three axis gimbal. In solex, (I have set the wheel settings by default to RC CH : 9 and I have connected the pitch axis of my gimbal to AUXILIARY : 1 of my pixhawk cube orange pin) and (I have assigned A short press to change the wheel settings to CH : 10 and I have connected the yaw axis of my gimbal to AUXILIARY : 2 of my pixhawk cube orange pin) and (A long press is assigned as clear wheel settings to get back to CH : 9) This all are done in solex tx app in herelink. And another thing is that A short press and A long press, both the button channels are set in as toggle button and not a momentary button in herelink original settings, so will the above setup for gimbal work as I expect ? Should I set to toggle or momentary for the A short press and A long press ?
Hi. I will be using solex as my default app. This is my solex settings along with my pixhawk cube orange pins for which I have connected a three axis gimbal. In solex, (I have set the wheel settings by default to RC CH : 9 and I have connected the pitch axis of my gimbal to AUXILIARY : 1 of my pixhawk cube orange pin) and (I have assigned A short press to change the wheel settings to CH : 10 and I have connected the yaw axis of my gimbal to AUXILIARY : 2 of my pixhawk cube orange pin) and (A long press is assigned as clear wheel settings to get back to CH : 9) This all are done in solex tx app in herelink. And another thing is that A short press and A long press, both the button channels are set in as toggle button and not a momentary button in herelink original settings, so will the above setup for gimbal work as I expect ? Should I set to toggle or momentary for the A short press and A long press ?
Hi. I will be using solex as my default app. This is my solex settings along with my pixhawk cube orange pins for which I have connected a three axis gimbal. In solex, (I have set the wheel settings by default to RC CH : 9 and I have connected the pitch axis of my gimbal to AUXILIARY : 1 of my pixhawk cube orange pin) and (I have assigned A short press to change the wheel settings to CH : 10 and I have connected the yaw axis of my gimbal to AUXILIARY : 2 of my pixhawk cube orange pin) and (A long press is assigned as clear wheel settings to get back to CH : 9) This all are done in solex tx app in herelink. And another thing is that A short press and A long press, both the button channels are set in as toggle button and not a momentary button in herelink original settings, so will the above setup for gimbal work as I expect ? Should I set to toggle or momentary for the A short press and A long press ?
hi could you answer a couple questios please? how did you wire your gimbal and what settings did you set on the herelink i can not get mine going if you would like myn email mioght be easier thanks
Hey, did you find a solution?
Hi. I will be using solex as my default app. This is my solex settings along with my pixhawk cube orange pins for which I have connected a three axis gimbal. In solex, (I have set the wheel settings by default to RC CH : 9 and I have connected the pitch axis of my gimbal to AUXILIARY : 1 of my pixhawk cube orange pin) and (I have assigned A short press to change the wheel settings to CH : 10 and I have connected the yaw axis of my gimbal to AUXILIARY : 2 of my pixhawk cube orange pin) and (A long press is assigned as clear wheel settings to get back to CH : 9) This all are done in solex tx app in herelink. And another thing is that A short press and A long press, both the button channels are set in as toggle button and not a momentary button in herelink original settings, so will the above setup for gimbal work as I expect ? Should I set to toggle or momentary for the A short press and A long press ?
Hi. I will be using solex as my default app. This is my solex settings along with my pixhawk cube orange pins for which I have connected a three axis gimbal. In solex, (I have set the wheel settings by default to RC CH : 9 and I have connected the pitch axis of my gimbal to AUXILIARY : 1 of my pixhawk cube orange pin) and (I have assigned A short press to change the wheel settings to CH : 10 and I have connected the yaw axis of my gimbal to AUXILIARY : 2 of my pixhawk cube orange pin) and (A long press is assigned as clear wheel settings to get back to CH : 9) This all are done in solex tx app in herelink. And another thing is that A short press and A long press, both the button channels are set in as toggle button and not a momentary button in herelink original settings, so will the above setup for gimbal work as I expect ? Should I set to toggle or momentary for the A short press and A long press ?
Hi. I will be using solex as my default app. This is my solex settings along with my pixhawk cube orange pins for which I have connected a three axis gimbal. In solex, (I have set the wheel settings by default to RC CH : 9 and I have connected the pitch axis of my gimbal to AUXILIARY : 1 of my pixhawk cube orange pin) and (I have assigned A short press to change the wheel settings to CH : 10 and I have connected the yaw axis of my gimbal to AUXILIARY : 2 of my pixhawk cube orange pin) and (A long press is assigned as clear wheel settings to get back to CH : 9) This all are done in solex tx app in herelink. And another thing is that A short press and A long press, both the button channels are set in as toggle button and not a momentary button in herelink original settings, so will the above setup for gimbal work as I expect ? Should I set to toggle or momentary for the A short press and A long press ?
Hi. I will be using solex as my default app. This is my solex settings along with my pixhawk cube orange pins for which I have connected a three axis gimbal. In solex, (I have set the wheel settings by default to RC CH : 9 and I have connected the pitch axis of my gimbal to AUXILIARY : 1 of my pixhawk cube orange pin) and (I have assigned A short press to change the wheel settings to CH : 10 and I have connected the yaw axis of my gimbal to AUXILIARY : 2 of my pixhawk cube orange pin) and (A long press is assigned as clear wheel settings to get back to CH : 9) This all are done in solex tx app in herelink. And another thing is that A short press and A long press, both the button channels are set in as toggle button and not a momentary button in herelink original settings, so will the above setup for gimbal work as I expect ? Should I set to toggle or momentary for the A short press and A long press ?