How to Clean a Plastic Briggs & Stratton Carburetor
ฝัง
- เผยแพร่เมื่อ 6 ก.ค. 2019
- Step by Step!
Today we'll be cleaning a carburetor on a Briggs & Stratton 500 Series!
This is a very common 5 hp engine, that can be found on many lawn mowers!
Simply follow the steps in this video & you'll be back to cutting grass in no time!
Engine Model: 10T802-0147-B1
PARTS:
Replacement Carburetor: 795477
Gasket & Diaphragm: Stens 520-175 or 495770
Air Filter: Stens 100-632 or 698369
Governor Spring: Stens 490-402 or 698719
Spark Plug: RJ19LM
_______________________________________________
If you enjoyed the video, hit LIKE & SUBSCRIBE!
New videos every week!
SOCIAL MEDIA:
/ eliminatorperformance
/ eliminatorperf
/ eliminatorperformance
2ND CHANNEL:
EP Vlogs: / @eliminatorperformance...
GEAR:
Camera: amzn.to/2HVkW9o
Tripod: amzn.to/2HGWt4w
Microphone: amzn.to/2J7k9DA
Cheap Mic: amzn.to/2xCBn6z
Headphones: amzn.to/2JeHUG9
Editing Software: amzn.to/2JD7OTx
Photoshop: amzn.to/2HBY6Ez
DONATE:
Bitcoin: 1NYgPvcvBWuhGRewsLE4Scy1cbzwndh5hZ
MUSIC:
Intro/Outro Music: Burnt - Jingle Punks - แนวปฏิบัติและการใช้ชีวิต
![[4K] BABYMONSTER(베이비몬스터) “FOREVER” Band LIVE Concert “영원히” 베몬만을 사랑하게 되…💗 [it’s KPOP LIVE 잇츠라이브]](http://i.ytimg.com/vi/TQfC0xdpiw4/mqdefault.jpg)
Thanks for uploading this. I was unfamiliar with how these Carbs worked. My mower had been running poorly and finally got to the point where it would only run from the primer bulb and shut off. I put my Carb and Tank a bucket of warm soapy water while I went to pick up the new Diaphragm and Gasket $4.10. Once I got back I dried everything off and reassembled it. Fired right up and runs like a new mower. You got me up and running in no time. A big Thank You from Pennsylvania! 👍
I watched some other videos before I cleaned my carb and this one after. I wish I had watched this one first because it's the best by far!
One of the most profusely explained instructions on cleaning and adjusting B&S small engine plastic carbs. Thanks for sharing.
This helped me out a tremendous amount. After the diaphragm replacement it fixed my mower.
I believe this to be the best instructional video on the refurbishment of a B&S carburettor that I have watched to date. It’s a clear and concise step by step guide for someone with only basic workshop tools and knowledge.
Thanks for watching Pete!
I was just thinking that, great video.
Got a 'broken' lawn mower from my dad. Hadn't run in 10 years. Quick trip to Lowes for some parts and I'm up and running! Had to spray some starter fluid in the carb to get it to start. Thanks for the clear and stellar video!
Thanks for the great tutorial. I use Torch Cleaner files to probe Main Jet. I used a small flat blade screwdriver to pop out the plastic Main jet/emulsion tube which has 3 small holes in its length. Mine was black and is secured by a tiny O ring. There is a flat spot on the top to pry it out. Work carefully! Mine is the 5 bolt model.
Be sure to seat it flush on reassembly. Carefully using a fine flat file I filed the bolt hole bosses adjacent to the block where the carb base was warped. This reduced the gap somewhat. I used some Permatex Aircraft sealant along the joint between those bolt holes.
I used a straight edge to see the warpage left between the 2 holes. That leak area sometimes accounts for the oily mess on the carb and block in that area I was told. Mine had the Diaphragm on the Carb side instead of the Tank side.
Seems right, but I reassembled with the diaphragm on the Tank side, then the gasket. Edited.
Seen several videos on this subject and this is THE Best video hands down....
I've paid for someone to "fix" my carburetor several times. They never took it apart like this (I always watch to try and learn) but did something to unclog it. I kept having problems so decided to do it myself. Thanks to this video I discovered I was missing a gasket. I disassembled the carburetor and cleaned it myself and will do all my own small engine work from now on. Next up, oil change LOL
I've watched a number of these in anticipation of cleaning my scarifier carburetor. This has been the best and most confidence building by some way. Thank you
Thanks for watching!
Well filmed and very thoroughly explained. Thanks!
To point and no story telling
Great way to teach and not waste time
I thought I had it but your video took me places I haven't been. Brilliantly clear and concise
(Hopefully it has saved me buying a new mower)
Big appreciation mate. I'm a beginner and I found this video the best.,, every thing in perfect details and easy to understand
Well done. Short and to the point.
Great video. Followed this and it fixed my “hunting” issues.
Thank you for taking the time to make this video. I followed your directions to a tee and it worked like a charm. Thank you again for your knowledge!
Thanks for watching!
Best how to video on this carburetor cleaning I have seen yet.
Try Taryl fixes all channel
Literally only 15 minutes of work and my Briggs & Stratton pressure washer started up again and ran just fine. You even addressed my minor oil leak I found. Great video my Guy
Glad it helped, thanks for watching!
Easiest carburetor for anyone to clean just need to be sure you change the gasket and diaphragm to ensure no issues like air leakage. Nice tutorial.
Thanks for that. I never thought of that method. One added bonus is the lawn gets cleaned as well :)
Believe it or not, the Spray Nine doesn't kill the grass, and there's hardly any fuel in there because I drain it out and let it sit for a bit!
Thanks for watching!
Fantastic video! Very thorough. Mine wasn't starting, so I went through the whole process. Took out the carb and tank, cleaned it all with carb cleaner before taking it apart. Took it apart, cleaned everything thoroughly. Washed inside the tank, then re-assembled, fresh fuel! First start and it started. Smoked a bit, so I checked the oil; oil was low, refilled the oil and restarted. Smoke is gone and engine runs like a champ. Thank you!
Great video!!!! Got my pressure washer running again… thank you!
Same here, very informational video thanks, will watch more of your them in the future 👍
Thanks for taking the time to make this.
Great video, since I have one just like it. My problem was a missing governor spring!! Thanks for including the spring description and PN in the memo section for this video!! I couldn't find it on my own; doing my own searching.
Very concise and detailed video. I have this same engine and carb. Learned some things I should be doing whenever I remove and clean my carb.
Thanks for watching!
Great video. Sure helped me out - I have this model and this spring it wouldn't start. Normally I would have taken it to a dealer but this video showed me exactly what I needed to do to fix this. Thanks man!!!
I think my dealer needs to watch this :)
Fantastic tutorial! Thanks for the help!!
Thank you for your careful thorough explanation.
Excellent video and instruction for my used mower. Thank you.
Great explanation and demo!
Good Video! Thanks for sharing. Showed me exactly what I needed to see/know.
Thanks for watching!
Very clear and detailed. Great .
Thanks for watching!
Great video! Very helpful! Thanks!
Good job. I'm a brazilian Trapp owner. 👏🏼👏🏼👏🏼👏🏼🇧🇷
Great video, thanks. So easy, came apart like dream.
Thanks for watching!
Thanks mate :) You save me a lot time with this video!
Very clear instructional video, thanks!
Thanks for watching!
Just to say thanks…..diaphragm/gasket change, new spark plug….job done…Cheers 👍👍
Awesome, thanks for watching!
Very helpful video, thanks!
Absolutely excellent video! Thanks for the knowledge.
Great help! Thanks for sharing
Love that you use spray nine , great video . I think this series of engine is one of the best briggs engines ever made . Reliable ,easy to service and maintain , long lasting engine . Much better than the new plastic crap of today .
Spray nine is good stuff, these carbs are easy to clean. Thanks for watching!
I believe you addressed the problem I'm having with my B&S mower. It tries to start after pushing the primer bulb but then quickly quits. I'll make sure that port you showed is good and clean. Great cleaning tips!
Thanks for watching!
thanks for posting. nice thorough video with good explanation and great detail.
Glad you enjoyed it!
This is the first video I ever seen with zero dislikes. Also thanks because this fixed a lawnmower I got for free.
Thanks for watching!
Excellent video!
Great tips! Really helped me out while I'm fixing an old mower of ours!
Thanks for watching!
@@EliminatorPerformance Have you done a video on how to set the gap on a Briggs and Stratton engine?
Thank you
By far the BEST video on these little plastic carburetors. GREAT JOB!!
Good easy video to follow and worked well for me. Thankyou
Thanks for watching!
I just wanted to know what (and where) the carburetor is, lol, but I watched the whole thing! Impressively thorough cleaning. Wow!
I've heard the phrase "Could be a dirty carburetor." in my life, but had NO idea what that meant, until now.
Brilliant Video - thanks heaps
Thanks buddy great video
Legendary.. thanks so much.. it’s running great after that..
Thanks for watching!
I like this demo; the explanation & images are spot on - Thank you !!
Please make the other demo of "Tear ofd and re-assembly the main part of Lawnmower"
Thanks for watching!
Great video best explanation I’ve seen cheers
Excellent presentation, thanks Mate ;-)
Great job! Thank you.
Thanks so much. Very good og pro tuturial . Regards from a happy amateur mechanic :)
Great video
Thankyou you explain all your videos very nicely . please keep making other videos
Excellent, much appreciated.
Interesting,useful information thanks for showing.
Thanks for watching Terry!
Great job!
Great video. Really appreciated.
Thanks for watching!
Thanks for good info.
Excellent teaching style, detailed content anl clear filming
Thanks for watching!
beautiful explaination!
Good demonstration of skill
Cool vid dude.helped me out loads.spot on.
Good work fella....saved me a packet
Fantastic video !! 👍👍
Thanks for watching!
Wow,....first guy to get the o-ring and locking ring right.
Thanks for watching!
Really helpful
Thanks mate, your the man.
Thanks for watching!
Very good video, wish I had it when I first cleaned one of these carbs some years back. I ended up using a one dollar squirt bottle filled with water and canned air (the kind used to clean electronics) and was just very careful. Funnily enough, soon I'm going to clean the same exact carb again so was looking to see if I even did it right. This time, however, I'm probably going to have to replace some things on it. It's been sitting outside for literally four years, but it's not seized and I need a mower, so...
Good luck, and thanks for watching!
Good vid, helped me a lot
I like your channel and videos. That being said, carburetor cleaner, a very thin wire, and an air compressor are all you need to clean s carburetor.
Very well explained ..you d man
Great video thankyou
New subscriber here in Winnipeg Mb. Thanks for your sharing.
Thanks for watching!
Thanks man!
I watched it all the way to the end and then took it to the shop to get fixed
Thanks and Good Day Eh!
You like Spray nine as much as I do , Great video .
Love that stuff, and Permatex hooked me up so I always give em a shout-out!
I have 2 of these cursed carb/gas tank combos. Neither will draw any gas, using the primer bulb. One viewer mentioned the ball/spring check valve behind the primer. I see nothing like that in either of mine. Perhaps that is why it won’t draw any fuel? I see you included the B&S p/n for them. Def grateful for that. Hope it’s easy to replace. Thanks for the excellent videos btw. Snowblower season is coming soon. I am almost done restoring my old 1960s 3stage…
Many thanks for this very interesting video. A question if I may about front wheel adjustment. My newly acquired Classic 35 mower does not have a height adjusting handle for the front wheels on either side of as in your video. (There are adjusters each side for the back wheels). At present the bodywork runs too close to the grass level. Is there an adjusting tool available or do you have an alternative simple solution please? Many thanks in anticipation of any advice received .
You do great videos thank for the info on your channl
Thank you ever so much my good man you are so thank you thank you again
Thanks for telling me how to adjust the throttle by bending that tab my old mower rips now.
Thanks for watching!
Would you please do a video on how to test the primer in a carb. In a tacumsia 3.5 hp vertical. And how to get in there and deal with that check valve & make it work like it should. Thank you
Good stuff....👍
Thanks for watching!
Great tip for getting the carby off the throttle lever, love the vid but i'm in Australia and can't seem to make any correlation between all the no's for the carby , diaphram and gaskets mines a 550 series 158cc any suggestions.
Thanks bro!
Thanks for watching!
Thank you
Excellent! Did the throttle link rod go to a hand throttle or a flywheel flapper?
outstanding
Well explained but I also saw a version where the foam air filter is soaked in light oil before it's installed - in order to effectively remove dust from the intake. What's your view ? Thanks for a great video.
Great instructional video. Do they take the same diaphragm part number no matter if they have 5 or 6 screws holding the carb to the tank?
I see that you only listed one part number. Thanks