Be careful when drilling plat like that my advice would be, to put bit wood down or get a vice for the bench drill. I can talk form years of experience as I split my hand and 2 finger open and broke 2 fingers. I was driling a big bit plat out with a big Carlton and it got caught I've am a welder/mechanic and farmer by trade been drilling hole for years and it took just 1 time. Also be careful when wearing gloves they don't get caught
Most people don’t get this, but repetition like this vastly improves one’s technique, quality and speed. Now I need 8 more MTD abandoned lawn tractors to make an even 10 needing resuscitation. 👍😂🔧🧰
Some good advice, don’t use gloves while running a drill press. I seen a friend get 3 fingers ripped off and couldn’t be reattached. You do some solid work though!
hi i love your videos and would love to have a work shop like yours but am only 11 and cant afford one i have a little shed that i work on my 3 bikes in
I'm finding more and more of these carbs are warping and leaking these days. Maybe something to do with ethanol in the petrol, I'm not sure. You can help against this by sandwiching the diaphragm between two gaskets. I notice you didn't remove the main jet, easily done with a flat screwdriver.
Man, that "pulsa-prime" style carb has been crap ever since it came out in 1990! The adjustable ones before 1990 were so much better, even though some of them were plastic. But I have to say, these newer ones are well built in comparison to what we get on those chinese OHV engine clones in the last couple of years!
Still hv mynold mower it's been 15 yrs works well same kind of tank the outside it not the problem it's the inside you gotta use some steel brushes and alot of brake clean to get it clean pain in the butt.
I think this may be more than the recommended daily intake of carbs
Brilliant! 👍
ASMR fuel tanks. Throw that in the title and watch your view count go through the roof man.
Be careful when drilling plat like that my advice would be, to put bit wood down or get a vice for the bench drill. I can talk form years of experience as I split my hand and 2 finger open and broke 2 fingers. I was driling a big bit plat out with a big Carlton and it got caught I've am a welder/mechanic and farmer by trade been drilling hole for years and it took just 1 time. Also be careful when wearing gloves they don't get caught
That was a lot of carbs!!! Thanks for posting.
If your going to sell these mate I might be after one or two?
here you go. www.amazon.com/s?k=briggs+carb+on+tank&ref=nb_sb_noss_2
Are you gonna restore 10 lawnmowers? Im curious now.
Video has been posted for 4 minutes now and say has no views and 29 likes. keep up the good work daggerwin
Loved it iv got 20 to 30 of them to do but I'm just spray painting mine and fitting new diagphrams gaskets and primers
Can you do a review on your parts washer? Love the bids 👍
I just watched a guy combine his parts washer and ultrasonic washer...
It was LOUD!!!
lovely stuff
Sorry Mister tricks when you left a comment on my channel I acadently deleted it by a accident sorry hop to see you there a again
Most people don’t get this, but repetition like this vastly improves one’s technique, quality and speed. Now I need 8 more MTD abandoned lawn tractors to make an even 10 needing resuscitation. 👍😂🔧🧰
Yet another amazing video thank you for putting the time and effort into making these videos for us to watch
You've really helped me understand how mowers and such work, To the point i'd like to get one and fix it someday
Great video! I like your audio descriptions that you do also. They are precise and thorough.
Thank you for your through explanation and video.
It would be very interesting to see what the restoration costs.
Around £40 for this one
You can buy them new for around £25 from China.
@@Ianhw77k and they would probably blow up in your face
@@Ianhw77k I think he means £40 total, as in £4 per tank
Where do get new Decals? I have seen on ebay there is people who reproduce them.
Why go to so much trouble to strip down, sandblast, and powder coat only to leave the decals on the side?
Hmm this 10 cylinder briggs and Stratton mower is gonna take a while to prime...
I keep rewatching all your videos as they are very much so entertaining
Keep it up
Really nice job i must have at least 30 tanks sitting around
Do you film these outdoors or are the bird sounds added in post? All in all, gorgeous restoration!
You know, I’ve been watching a lot of your vids recently, and really loving them. You got one more sub now!!
Great video as always machinery restorer are these carborator for future lawn mower projects and Restoration looking forward to them
Now that’s a float bowl!
cant wait for the upcoming project
nice content
What solution do you use in the ultrasonic cleaner?
Carburetor cleaner with small red straw works great for small passages, jets, emulsion tubes, etc.
Did anyone else cringe at 2:54 and holding sheet metal on a drill press with a rubber glove? Yikes! Interesting work though, nicely done!
You did a well done job they al look nice and clean👍👍
Nice resto on those.Briggs and their plastic carbs basically throw aways if after a good cleaning and still haveing issues...
Nice! Ill make sure il gonna watch the whole video without falling asleep
Impressive results mate 👏🏻👍🏻
Great video they look new
So great to see someone having pride in what that do!!! Great job.
These things will be gold dust soon!
I probably have 100, and I’m not joking 😁 but I only refurb them as I need them.
Mowersandstuff it’s shame that engine is not made anymore! I’m sure it will be copied!
What’s the solution used in your parts cleaner?
Thanks daggerwin
Good job. Will be doing mine in the near future 🤗
Simply fantastic. 😊
Great Video once again Daggerwin.
Some good advice, don’t use gloves while running a drill press. I seen a friend get 3 fingers ripped off and couldn’t be reattached. You do some solid work though!
Where do you buy the push to prime stickers?
Where did you get the tanks from
Very nice job sir!
You must have a lot of patience I would be done after 4 or 5 lol
Better than an ASMR video....
Love the vid keep up the hard work
hi i love your videos and would love to have a work shop like yours but am only 11 and cant afford one i have a little shed that i work on my 3 bikes in
Nice job well done keep up the good work
Where might someone find those or did you just part out a bunch of machines?
If you still have any of these around and they're for sale let me know. Nice video.
Ready to go! Nice work! I'm waiting for the chirping birds to file a copyright infringement.
I'm finding more and more of these carbs are warping and leaking these days. Maybe something to do with ethanol in the petrol, I'm not sure.
You can help against this by sandwiching the diaphragm between two gaskets. I notice you didn't remove the main jet, easily done with a flat screwdriver.
You should restore an old vintage massey ferguson tractor 👍🏻👍🏻👍🏻👍🏻👍🏻
Drilling small piece of sheetmetal with gloves on = maximum pucker factor.
Great videos though, with just enough attention to detail.
I absolutely hate these... Especially if the carb is warped. plastic is the worst design for them.
Debbie downer here. While it fed my OCD personality, you can buy a brand new assembly for $30.
Great stuff.
Man, that "pulsa-prime" style carb has been crap ever since it came out in 1990! The adjustable ones before 1990 were so much better, even though some of them were plastic. But I have to say, these newer ones are well built in comparison to what we get on those chinese OHV engine clones in the last couple of years!
How much petrol can one of them hold?
If you can remake decals or stickers, why not remake those and powder coat the whole tank?
Just bought one about 2 weeks ago paid 15 dollars for it on eBay carb and gas tank new.
What kind of sticker machine do you have to make different kinds of stickers for different things
Good Job
where can i buy this tabk
Super magnific
Still hv mynold mower it's been 15 yrs works well same kind of tank the outside it not the problem it's the inside you gotta use some steel brushes and alot of brake clean to get it clean pain in the butt.
DAAAAANG SOOOON THATS A LOTTA TANKS
Ha! I have one of these, with cap, sitting in my garage if you want it. From the mower I destroyed on my channel
I have been working on this product suite, welcome friends to consult
👍👏
But why it’s just a cheap push mower?
What is life like my Bro??!!
👍
Your the reason they sell packaging of 10 briggs carb diaphragm/gasket kits aren't you?
That’s a lot of tanks
Interesting
would you be willing to sell one? trade my old one in on it?
WHY!
Это отчего?
But, why??
Too much for me just get another used tank.
Who can use 10 Pieces ??🙄🙄
No views but 50 likes😂😂😂😂😂. TH-cam for ya
And 1 dislike from an asshole!
first
Good thing to do if you need therapy.
Or come by my shop and buy one for 50$
just buy new these are so cheap
Buy a new one probably cheaper. Google> Briggs and Stratton 495912
For a non genuine it's cheaper, these are all genuine though.
495912 is genuine OEM Briggs and Stratton. They still make them. Google it!
I know that's not what I'm saying. I was replying to the part where you said "Buy a new one probably cheaper."
And a new OEM carb/tank assembly probably is cheaper than rebuilding the old one!
Time wasted taping and making the block plate to sandblast.
I don't mind taking time to do a job properly.
Well boys if you gotta big old Chevy I found some cool backup cams on factoryautomods.com if your interested...