Completely agree. I went for the brand ''Chaft''. They make some homologated super cool blinkers. Got the Chaft Stone for the front, and the Chaft Sail (similar to the Yamaha ones) for the rear. Totally worth it, super clean, bright, small....
Im 17 and love binge watching ur videos,for reasons that almost everyone else has already commented so I'm sure ur aware of it,love such videos as today, please make more 🤘🏼
I love the LCD flip and couldn't wait to slap it on my MT-07, but those rev colour things.... Nope! Personally I think it makes it look a bit too much like "home made" or DIY. Just doesn't look the part to me. I'm going to bet that you will pull that off, assuming you haven't already! 😂🤣😂🤣
I did it to my MT-07 and i wont say you're right however i definitely wouldn't say you're wrong. 😅 It looks great at night, however daytime riding the colors don't do a whole lot and the green is hard to see through in direct sunlight.
I was wondering if the color film could be applied under the "flip" film? I was very interested at first, but now seeing those sitting on top just makes it look too DIY for me.
I did the dark mode flip but I messed it up. I pulled too hard and now most of the display is darker than it should be. You can’t notice it during the day but at night you can definitely see it
Good day / night .... i really liked your content amd how you go through it step by step. however i was wondering whether i can do a complete fairing change on my 2016 FZ09/MT09 to a complete fairing kit of a 2018 model.
Interesting vid, chaos. The headlight x's are dumb, the DIY display color is even dumber, glad u finally got rid of the plate bracket. Anyway, ride safe, god bless u.
@@voyteq1 yes, because the shape of my bike's display is just rectangular so I have no issues by just flipping it. make sure to clean it before re attached it, Im just using cajuput oil 😅
this is all cool and that, but again just to much tech an a motorcycle, mine is on permanent dark mode as the lights don't work, it's also analogue old school🤘
Hey man I stay in pretoria and have the exact same bike , can you help me with where did you buy that replacement axle and block ?? What did it cost you , I know yamaha asked me like R3000 for the replacement kit for that fender? Please mand and thanks awesome videos
You need to change those traditional halogen bulb indicators to a LED
That would be cool and slick
Completely agree. I went for the brand ''Chaft''. They make some homologated super cool blinkers. Got the Chaft Stone for the front, and the Chaft Sail (similar to the Yamaha ones) for the rear. Totally worth it, super clean, bright, small....
Im 17 and love binge watching ur videos,for reasons that almost everyone else has already commented so I'm sure ur aware of it,love such videos as today, please make more 🤘🏼
69 likes i can't ruin that
Did the same on my MT07, but if you're really iffy with the TFT reality you can allways purchase a KOSO RX4 tach. It's plug and play
I love the LCD flip and couldn't wait to slap it on my MT-07, but those rev colour things.... Nope! Personally I think it makes it look a bit too much like "home made" or DIY.
Just doesn't look the part to me.
I'm going to bet that you will pull that off, assuming you haven't already! 😂🤣😂🤣
I did it to my MT-07 and i wont say you're right however i definitely wouldn't say you're wrong. 😅 It looks great at night, however daytime riding the colors don't do a whole lot and the green is hard to see through in direct sunlight.
Totally agree
That chain needs some love 0:59
I was wondering if the color film could be applied under the "flip" film? I was very interested at first, but now seeing those sitting on top just makes it look too DIY for me.
I like the X's - makes it kinda unique and looks bad a**!
The dark dash looks amazing, the rpms on the other hand...
ive been binge watching your vids for 3 and a half hours in the hospital waiting room now
I had no idea that's how the screen worked. That's very cool. Thank you.
bruhh that diy was awesome
Love the x's and that dash looks phinominal ❤️❤️
I just found this guy and he's awesome! He makes content that is extremely useful to the everyday rider!
I did the dark mode flip but I messed it up. I pulled too hard and now most of the display is darker than it should be. You can’t notice it during the day but at night you can definitely see it
Is the display in dark mode still bright enough during the day?
Tip= isopropyl alcohol(90-95%) removes ANY glue residue. Also does not affect electronics or paints.
maybe get a proper SC Project exhaust for it?
“Goo gone” for adhesives works good
Good thing you put stickers on, since that chain is rusting away.
Tail and the X's looks BadAss
5:40 Googone my guy. Googone. Stuff will take Dried fresh asphalt off car paint.
Great idea in general instead of trying to swap out entire LEDs, thanks for this I’m stealing!
Need that for my CB650R as it can get a little hard to read in sunlight...
Same procedure with ninja 400 lcd? Polarizer at the top of lcd?
Make a video on bike seat covers🙏
Rev colors and headlight crosses look awful, however the dark mode looks dope, although i think its to much for my ability ahah
Super nice get the pyramid plastics rear cowl and put on a DPM race gullwing wind screen. Zoom Zoom .
I cant believe you cut the plate light’s cord🤦🏻♂️🤦🏻♂️ a few inch before it has a socket
yeah the plug was just hidden
Bro my riding buddy got one MT09 what a blessing Got killer film footage and his bikes bad ass praying 🙏for a new ride Shiva took a dump 🤯
YESSSS this is the video i needed :D
Quality content as always ❤️ Cudos 🤝
Did the red on my 2021 mt07 and looks sick
Dude next time....use Q20 for clean adhesive stuff
Do the x-Stickers not reduce the headlight beam drastically?
Good day / night .... i really liked your content amd how you go through it step by step. however i was wondering whether i can do a complete fairing change on my 2016 FZ09/MT09 to a complete fairing kit of a 2018 model.
Change the stock indicators
" I have X's in various sizes in both black and white..."
Portugal mode
If you take the X’s off I’ll stop watching the channel
Wondering if the lcd thing will work on my ducati scrambler 🤔
nice broooh!!!!!!
try making x's blue
Yo do yourself a favor and put twitter on dark mode lol. Great video btw, i might try it on mine too
Acetone. That is all ;-)
so where does the number plate go now?
poor man's TFT - this is good
Interesting vid, chaos. The headlight x's are dumb, the DIY display color is even dumber, glad u finally got rid of the plate bracket. Anyway, ride safe, god bless u.
It's jst 💥💥💥💥💥
Looks dope brother. I bought MT-15 INDIA, CAN WE DO THE SAME?
yesssssssss
Oooo the Xs look bad CC
Take those off please.
not a fan of the X's on the headlights. make it looks like it's owned by a 14 year old
Side blinkers suck 😤
Steering damper bro
Next mod is to change it to an R1 as I don't like naked bikes
Wauu che sballo
U have done this before havent you 🙈
.
Get an R6. Period.
Love your vids, but please stop saying “however” 100 times per video…
Got the lcd flip on mine too. Such a simple mod but I love it! Am I the only one who actually likes the rear plate holder? 😂
me too! its become "negative display", a simple and super cheap mod (0 cost) 🤣
@@afletra what do you mean by saying 0 costs?
@@voyteq1 Im just reusing the stock polarizer and reverse it, attached it on to the screen with transparent tape along the edge
@@afletra oh do you? Never though it is possible. Nice trick 👍🏻
@@voyteq1 yes, because the shape of my bike's display is just rectangular so I have no issues by just flipping it. make sure to clean it before re attached it, Im just using cajuput oil 😅
My cousin works in a cool workshop that specializes on this kind of stuff. Got some free update to my motorcycle's dashboard.
Damn I’m early!!! Nice little watch before work. Keep it up.
Craig.
this is all cool and that, but again just to much tech an a motorcycle, mine is on permanent dark mode as the lights don't work, it's also analogue old school🤘
It looks like your chain needs some attention a good cleaning and a lubricant will do wonders
Waiting for this shit
dude.. why u never ride at night??
Hey man I stay in pretoria and have the exact same bike , can you help me with where did you buy that replacement axle and block ?? What did it cost you , I know yamaha asked me like R3000 for the replacement kit for that fender? Please mand and thanks awesome videos
Love ur bike love what did leave the x on the head lights
you get me happy with videos
thx
Will you upgrade to the pro taper evo bar again?
Love the South African accent
you need some good levers
that crazy saw tho