For some reason, when i tried launching, the first stage was not controllabe for some reason, idk why, but if i can figure something out then i will reply to this comment
I have tested it, could you make the Space probe fairings more controllable, one at a temp of 2500 degrees, it becomes uncontrollable, I tested it in earth’s atmosphere, and it kind of went out of control when at 2500-600 degrees
When I spawn it in it says my rocket does not have a capsule making it uncontrollable so how do I fix that in you vid I did not see you put a capsul in the rocket so how I fix it ?????
@@the_Dutchdude try move the lander, rover and the parachute upwards so it can fit a 6 wide separator under it - point it towards the rover otherwise it will remain attached to it instead of just ejecting the heat shield
I also made my own probe lander for venus but it doesn't attach with rest of the remaining rocket. Idl how is your whole rocket and probe work together .
Bro trust me,This rocket isn't only for mars by adding 5t of fuel and 2-4 rcs you can add more weight and equipments or whatever you want to the rocket or the rover and literally can go to every planet you want without any dlc or expansion packs(you need to do some struggles,Make sure to create quicksaves)!!!!Tested my own in the latest version of sfs!!!(to go to some planets you may in need to use gravitational force) Edit:Btw sry for my bad skill in English...Love from Bangladesh🇧🇩❤️:)
But when entering through the atmosphere in Mars .......during burning...at about 4500m my fairing always tilts exposing the parts having no heat shield and burns and crashes into the surface e
Could you just tell me how did you do the three engines appear from nowhere? Thank you! (Kids will start complaining because I don’t know, but that’s fine).
You can put engines together by the process of "clipping"| 1st put the tank, 2nd place the engines on the order that you want to place, (be carefull not to stick them too close it may heat up and explode) 3rd you should see a blurred out version of the 3/2 engines select the 2 and then move it a bit then, place it again where it was originally possisioned. And there ya have it! A clipped 2/3 engines that work!
You can put engines together by the process of "clipping"| 1st put the tank, 2nd place the engines on the order that you want to place, (be carefull not to stick them too close it may heat up and explode) 3rd you should see a blurred out version of the 3/2 engines select the 2/3 and then move it a bit then, place it again where it was originally possisioned. And there ya have it! A clipped 2/3 engines that work!
Hey, can you help me? At first when I try to launch it, the stages are all mixed up. At first, there are only three stages. I clicked on the rocket and clicked switch to. Then the other stages were in that but not the rover parts. And if I switch to the rocket, I cant control it. It says no control on the screen. I'm confused... A little help?
Where do you have to press to push the rover away from the rocket? I did everything right. But it doesn‘t matter how often I click, the rover stays connected to the rocket
Bro the rocket did not work I was on top where the probe was at but I could not even control the engines so I put a capsule inside the fuel tanks and when I went to the second stage, the medium engine did not even work and I have to put a capsule on top, but that just made it even worse
how do u do these controls: 0:09 0:10 0:41 dis soooo confusing like wtf... btw the 0 0 9 is like holding down ur mouse at the home screen and that thing happens and the 0 10 is getting the ghostly looking parts to the non ghostly...
@@disintegrator1013 the part where u move to make it good i know from a tutorial now, and i want to know how to do the thing where like in pc y’know where u hold left click on mouse then it would show that blue box, how do u do that or u have to do tutorial?
I did most of it correctly but got the timing a bit wrong for orbit so thinking it would be okay i carried on going but I burnt up entering mars atmosphere I was going to fast for parachutes
![The biggest rocket I've ever built... [Spaceflight simulator]](/img/n.gif)
While watching this, I literally said: "bro is way to advanced for us, we don't deserve him"
Indeed he is
I deal with DLC. But yes bro is too advanced for us I needed 3 stages and a booster to even get a sattelite to mars when I didnt have DLC
How to make everything appear, like before it was transparent but you selected that part and made it opaque.
It's at 00:12
Clipping - search for tutorial on yt
Oh thank you so much
“was transparent”
Do you mean disappeared?
@@artyjaycayairlines no when you put two things together you can see a faint silhouette of it. So I just called it as transparent.
Bro that design is so fucking sick i was straight up just stuffing the rover in the fairings and hoping for the best
I had no idea you could put stuff in eachother and make them work before this video, so thank you
Me neither but i dont know how to
@@Opticalillusionsarecool select both objects and move by 1 unit and back
Thankyou 1080 GBA
@@1080GBA thank you
@@cesarbiboux np
For some reason, when i tried launching, the first stage was not controllabe for some reason, idk why, but if i can figure something out then i will reply to this comment
So, i figured something out, if this happens to you too, then put a probe in the first stage
I have also same problem
Cus you’re off-line
His profil.........,
use 6-wide separator
Really cool vid!, and I'm your 800th subscriber :)
Thank you for the rocket. Im in the mars now!
Thank you so much, because of you I landed my first rocket in the moon and I’m so happy🎉
But this is a mars Rocket
@@n0t_h4pp1i nobody cares what it is for, let them have their moment, everyone's first time is hard
@@thicccucumber7 oh ok but this is mars Rocket
@@n0t_h4pp1i he probably meant that in another video helped him land on the moon or he used this rocket to go to the moon
@@n0t_h4pp1i shut up
You are the best! I landed 2 rovers on mars and it was my first.
I have tested it, could you make the Space probe fairings more controllable, one at a temp of 2500 degrees, it becomes uncontrollable, I tested it in earth’s atmosphere, and it kind of went out of control when at 2500-600 degrees
THX SO MUCH. I've always wanted to build these types of rover rockets but they always come out as doodoo so thank u so much again and I love IT
I have one question, what do you press to make them be inside eachother and work?????
actually I also made my own no dlc mars and moon Rover design it very simple thx for the heart and I will now share my Mars Rover design here too
That's cool!
Whats "DLC"?
@@Salenite microtransactions that expand your gameplay experience
thanks for the rocket, now i got to build my own rover ( you earned a sub also)
Also my rover and rocket ended up being two seperate rockets so i couldnt use the shortcuts, any way to fix ithis?
Nvm i fixed it :)
@@namrepus9947 nice!
Switch to the rover then you have rover staging
Thanks so much I couldn't figure out how you merged them but now I understand and has landed a rover on Olypmus mons
thats pretty difficult - well done
How hard is it to climb Olympus Mons?
Wow thanks for the tutorial, i cant believe you can go to mars without buying DLCs TYSM
Tbh it’s not hard to go to mars without dlc
IF you actually use math in sfs
I made it to mars multiple times (the problem is going back because I don't have enough fuel lol)
i cant find the blueprint URL
no you gotta build it yourself
@@disintegrator1013 why not
at the rover engine it says that engine has no fuel source and i did place the fuel thing
When I spawn it in it says my rocket does not have a capsule making it uncontrollable so how do I fix that in you vid I did not see you put a capsul in the rocket so how I fix it ?????
i put a probe
thank you bro this vid made the day where my first EVER mars landing is
I used to have to launch earth satellites but now I’ll venture on the stars thank you.
nice
Bro the first stage can take you to low earth orbit and still have some extra fuel this rocket is perfect for a Mars mission
0:10 how did you make it that they are not on each other
clipping, tutorials all over yt
The fairing doesn’t work for me 😢 1:52
because of the update, this video is outdated
@@disintegrator1013 oh ok
I made the rocket as shown in your video, but when I launch- I am not able turn the ignition on. Please suggest what is the issue.
6wide-separator between rover and heat shield
What does it say when you try to turn it on?
Thanks for making this video because it was so hard for me to make my own rovers for mars so thanks alot + you get one more subscriber
glad you liked it!
Thanks
Pls help me to undock, always i try the tyre activate
How i undock it pls help
staging
Thanks for the blueprints and I subscribed you and liked your video
you legend
How did you do at 0:41 cus i dont know how to do
clipping tutorials are all over yt
My rocket is dividing into 2 parts please give me its solution
its staging its normal
0:11 how to tho that?
tutorials on yt
@@disintegrator1013 What do I search
When I press launch, the game immediately sends me to the rover but my main rocket says no control
check if you made a mistake on building the rocket or staging
@@disintegrator1013 I haven’t, I followed everything, although I suspect it’s because of the lander being unattached in the capsule
@@the_Dutchdude try move the lander, rover and the parachute upwards so it can fit a 6 wide separator under it - point it towards the rover otherwise it will remain attached to it instead of just ejecting the heat shield
@@disintegrator1013 I’ll do, thanks.
I also made my own probe lander for venus but it doesn't attach with rest of the remaining rocket. Idl how is your whole rocket and probe work together .
Bro after landing , how to detach the rover, my wheels keep on rolling but I cannot get off the board !!! Please help
Hey so I have a question when I start I start on the top part so I can’t activate my thrusters how can I fix this?
6-wide separator between the lander and the heat shield
What did you do on the one when you put the the big one the big white one cuz im confused
clipping i guess? tutorials are all over yt
Bro trust me,This rocket isn't only for mars by adding 5t of fuel and 2-4 rcs you can add more weight and equipments or whatever you want to the rocket or the rover and literally can go to every planet you want without any dlc or expansion packs(you need to do some struggles,Make sure to create quicksaves)!!!!Tested my own in the latest version of sfs!!!(to go to some planets you may in need to use gravitational force)
Edit:Btw sry for my bad skill in English...Love from Bangladesh🇧🇩❤️:)
nice
@@disintegrator1013 please please please make a tutorial on reaching mars
I am also from Bangladesh 🇧🇩
That Will Be The Same@@awesome_omar
Can you please add a tutorial on how to put the capsule in because you didn't show how to put it and were to put it
I put a probe via clipping
Hello, I followed every step but it’s not allowing me to fly without the capsule. What’s the fix for this?
put a 6-wide separator between the lander and the heat shield
@@disintegrator1013 thanks!
Where is the lander and the heat shield
Thank you so much for this tutorial! It worked but i had to add side boosters. But TYSM!!
youre very welcome
Thx for making this i can finally land a rober to mars
Do you use part clipping and if u don't how do you do the first step?
Thank you so much for this!! After watching this I tried it myself and landed on Mars with ease. I also landed two rovers on mars
very nice
I know this was a year ago so I might get no response but how to I make the engines go without a capsule?
you gotta use a probe
@@disintegrator1013 I already figured this out when you replied lol but thanks for trying
@@Nooby823 been busy lol
@@disintegrator1013 relatable lol
But when entering through the atmosphere in Mars .......during burning...at about 4500m my fairing always tilts exposing the parts having no heat shield and burns and crashes into the surface e
you could download a mod to stabilise the craft?
Why did it tell me I have no control help
Put a cap on the fuel tank (in the last phase you put it on)
Or you can add a probe to your stages and a capsule on your last stage
Well how do you make it appear anytime because when I try to put it over something it’s not working because it’s transparent for some reason how
clipping, tutorials are all over yt
Could you just tell me how did you do the three engines appear from nowhere?
Thank you!
(Kids will start complaining because I don’t know, but that’s fine).
You can put engines together by the process of "clipping"| 1st put the tank, 2nd place the engines on the order that you want to place, (be carefull not to stick them too close it may heat up and explode) 3rd you should see a blurred out version of the 3/2 engines select the 2 and then move it a bit then, place it again where it was originally possisioned. And there ya have it! A clipped 2/3 engines that work!
@@zachgaming1644 Thank you!
I already had discovered, but, thank you for taking your precious time on me.
May god bless you, Zach!
Hello, thats a nice rocket design but is there any capsule to place? I cant fly out of mars...
you're supposed to place a probe
Thank you for showing me that rocket and telling me how to built it I just landed 2 rovers on the moon and 1 rover on Venus 😊
there is a link in the description to downlpad the file bit you copied it?
In the first part how do you make it that the engines are able to be there what button did you press?
You can put engines together by the process of "clipping"| 1st put the tank, 2nd place the engines on the order that you want to place, (be carefull not to stick them too close it may heat up and explode) 3rd you should see a blurred out version of the 3/2 engines select the 2/3 and then move it a bit then, place it again where it was originally possisioned. And there ya have it! A clipped 2/3 engines that work!
Everyone saying thank you it's helped me a lot and I am saying this too I am making a movie so this can help me
Can I use this rocket in my video? I will credit you.
sure
How do you make it work without a capsule? It won't work for me if I don't add a capsule.
add a probe
Where did you put the capsule? Since i cant use the engine and stuffs without it
i put a probe
When I was testing the rover for reentry (in the earth's atmosphere) it becomes unbalanced. Can you tell me why?
mars atmosphere wont be too thick to knock the rover off balance, and this rover is designed to go to mars
@@disintegrator1013 well it worked thx
how do you deploy the patachutes without opening the fairings?
staging
thanks
And what is a patachute?
@@artyjaycayairlines read that in an irish accent
How do you select with that box thing? I don't know how to.
clipping
tutorials are over yt
Fuel is never enough when i try to get to Mars. What i'm doing wrong?
maybe you need to clip in more fuel, bcs the games updated sinc i made this vid
@@disintegrator1013Yeah, basically the fuel always ends when i'm in the transfer window, just about to reach Mars. I will modify it later, thanks.
How to load this blue print. Your link doesn't work. Help me
its outdated, but i dont play sfs anymore
Hey, can you help me?
At first when I try to launch it, the stages are all mixed up. At first, there are only three stages. I clicked on the rocket and clicked switch to. Then the other stages were in that but not the rover parts. And if I switch to the rocket, I cant control it. It says no control on the screen. I'm confused... A little help?
put a 6-wide separator between the rover and the heat shield
@@disintegrator1013 thank you so much
You earned a sub
@@disintegrator1013 it.. Uh... The prob is still there... A little more help?
@@Technoguy255 can't help you w/that unfortunately
I'm having troubles in orbiting mars
How do u orbit mars without the fuel running out?
add more fuel
U mean clipping the tank?
Bro, idk how to make the engines visible, it was invisible at the first start in the video, im on android
might be a glitch
@@disintegrator1013 ok, but how do i fix it tho?
@@cheezeboi666 I don't really know
Gotta buy the $6.99 and enable clipping.
@@soulpaua2097 yeah it would be way more convenient
Whenever I get to the last stage of the rocket when I release the rover it says no control
maybe you got the staging wrong
I cant remove the rover from the Rocket
maybe you didnt stage the docking port
Same, I’ve been spamming but it keeps saying that I turned on the River wheels
@@smellycheese6016 oh thats weird
Where do you have to press to push the rover away from the rocket? I did everything right. But it doesn‘t matter how often I click, the rover stays connected to the rocket
maybe a landing leg or a solar panel is clipped into it
same here
@@disintegrator1013the rover wheel is, how to click it still?
Not working :( just says no control
you shouldve added a probe???
Can someone help me with the thruster part for some reason it keeps being transparent how do i stop that?
clipping, tutorials are all over yt
I can’t do it my middle faring the tiny one goes and connects to my probe
do the fairing first then put the probe in
It won’t let me turn the engines on when I try to launch it.
You didn't put a probe ig
Idk how you mix them can you do a tutorial of how you make them stick like howw
search clipping on yt
alright i just landed but for some reason i cant get the rover out and ready to drive
undock
The design is fantastic for non dlc but i would keep the twr for the first stage around 1.50 to 1.25, that way it would have the most delta V possible
Bro the rocket did not work I was on top where the probe was at but I could not even control the engines so I put a capsule inside the fuel tanks and when I went to the second stage, the medium engine did not even work and I have to put a capsule on top, but that just made it even worse
its outdated
0:09 what did you do ?
clipping
its said your capsules making it uncontrolable how?
I don't know
@@disintegrator1013 ok
@@disintegrator1013 noice
how do u do these controls:
0:09
0:10
0:41
dis soooo confusing like wtf...
btw the 0 0 9 is like holding down ur mouse at the home screen and that thing happens and the 0 10 is getting the ghostly looking parts to the non ghostly...
selecting parts in that box and clipping
@@disintegrator1013 the part where u move to make it good i know from a tutorial now, and i want to know how to do the thing where like in pc y’know where u hold left click on mouse then it would show that blue box, how do u do that or u have to do tutorial?
@@Mats947 right click
@@disintegrator1013 i mean on phone
@@Mats947 hold for at least 1 second then drag it will form a box that selects all the parts
Haven't tried the rocket yet but, will it work on other planets?
you will have to be careful when going to venus
How can i put the firts Motors in place its not working i play on mobile
make sure it is not clipped into the fuel tank
Dude, what buttons are you pressing to clip the items together
holding the screen for a second, then drag to form a rectangle, select all the parts then drag them together
@@disintegrator1013 can you create a video on that
@@BiasOfficialChannel theres tutorials online already
@@Paradox-22 you can build it yourself its super easy
@@disintegrator1013
“You can build it yourself”
Build???
how to make this not invisible i can't and idk how to do that
0:10 what did you press
clipping, tutorials all over yt
Going to mars is harder then expected . Is there an easiet way?
If there ìs. Tell me!
there are tutorials all over yt and im pretty sure the tutorials cant be any easier
@@disintegrator1013 ive already landed on moon but ill try mars
Alternate title: The best mars rover speedrun rocket on youtube. By viewers experience
I did most of it correctly but got the timing a bit wrong for orbit so thinking it would be okay i carried on going but I burnt up entering mars atmosphere
I was going to fast for parachutes
dont lower your periapsis too much
Bro every time I go in the atmosphere I burn upeven though every angle I do it
maybe make the reentry less steep
But the problem is how you gonna get back to earth?
not supposed to - you should leave the rover on mars
@@disintegrator1013 oh
hey how did you put the parts on each other?
clipping, tutorials are all over yt
Click the part,drag the other part over it and click other part and move it a bit
thank you i always wanted to have a rover in my game
Is there any way to get to Mars from the moon?
i mean yes but its easier to start from earth or you could use moon as gravity slingshot
Where's the blueprint of it
its easy you could build it youself
when are we getting more recent spaceflight sim content!
ill try to make some if i have time
Hey whenever i open the solar panel it just goes down
maybe you turned too much
Like whenever I do the first thruster parts it never works
?
dude your the best i was looking for a rocket that could get me to mars
I made this rocket but its continuously showing no control when launching. What can I do??
use 6-wide separator between the rover and the heat shield
Switch to the main rocket
won't engine heat ruin everything?
no because they arent clipped together to an extent
idk how you made the transparent one not transparent
interior view
Really good rocket. I just landed on mars but my rover is still stuck in the heat shields so i cant use it
pls help
idk what happened there tbf