This is a fascinating video! Thank you for for the work that it took toward putting this together. Although I have an 01A, your video has helped me to understand the workings of this similar transmission.
Patrick, hoping you can help. I just acquired a used TDI 01E. I have not yet installed into my 2004 2.7 A6. This used trans shifter shaft works well by hand shifting on the bench. I slightly rotate the input shaft for alignment and the gears fall into place. Shifting has a good feel, however, the input shaft will not rotate when engaged into any gear. Also, while in neutral, or any gear, the axel flanges will only rotate in opposite rotation. I'm unable to rotate the axel flanges together in the same direction. Is it hard to rotate the input shaft because of the Torsen differential? And is it also due to the Torsen that I can't rotate the two axels in the same direction? Or, do you feel that the trans is damaged? Any suggestions? Thanks for taking the time. Dennis
If you turn any axle flange forward, the opposite side turns backwards. This is normal. That is the way differentials work. You would have to turn both sides in the same direction at the same time. Try applying tension to both drive flange so one cannot turn without the other and power should transfer to the output shaft at the torsen differential. th-cam.com/video/VN4_asSBEKY/w-d-xo.htmlsi=T8878DMp94L0eVt7
Thank you for this video! This has been a great bit of help. While not exact, there is a lot of overlap here with the 01E CBD found in the C4 S6 (URS6). Curious if there is any interchangeability between the synchos for this one and mine.
Sorry, I don't know. I only have access to the C5 A6 and B5 A4. There is a website that tell the difference between various build but I did not save it. Try Google, you may find it. Thanks for watching.
Great explanation of how the transmission works. But what fluids should it be filled with? Does the center differential torsen have any special oil, or does it share oil with the front differential and the gearbox? Thank you.
I use Fuchs gear oil or the one from the dealer which is probably made by Fuchs. There is only one type of oil in this transmission. The automatic version made by ZF use auto trans fluid for the front section and gear oil for the rear (torsen diff).
@@raulgambramartinez65 I am not a transmission repair person so I can only speak about what I use. I tried Redline after rebuild and that was the worst. I changed that real quick because shifting was not good especially from 1st to 2nd and when it's cold. I replaced it with Fuchs 75w90 and that was a night and day difference. The next time I changed it I went with the one from the dealer. (I didn't see any difference between the dealer oil and the Fuchs) As for GL4 or GL5, I don't remember.
No. I have 3 tiptronic (ZF 5HP19) only if one of them break and I decide to fix it myself. There was a set of video's on TH-cam with a British guy explaining the sections and assembly procesures. I believe Garry Ferrario did some repair on these but he never explain anything, just teardowns.
You are the man for putting together this video
Thanks
where is the drain plug to drain the oil? just trying to do an oil change. cheers mike.
This is a fascinating video! Thank you for for the work that it took toward putting this together. Although I have an 01A, your video has helped me to understand the workings of this similar transmission.
Just bought one (01E) great video so helpful Thank you
Thank you for the great videos, I am in the process of rebuilding my a4 b5, a lot of the info from your videos help with that. Subscribed
Thanks for the feedback. Audi 2.7t Timing belt removal and install coming up next, look out for that.
Ne seri ne znas to da uzubis
Patrick, hoping you can help. I just acquired a used TDI 01E. I have not yet installed into my 2004 2.7 A6. This used trans shifter shaft works well by hand shifting on the bench. I slightly rotate the input shaft for alignment and the gears fall into place. Shifting has a good feel, however, the input shaft will not rotate when engaged into any gear. Also, while in neutral, or any gear, the axel flanges will only rotate in opposite rotation.
I'm unable to rotate the axel flanges together in the same direction. Is it hard to rotate the input shaft because of the Torsen differential? And is it also due to the Torsen that I can't rotate the two axels in the same direction? Or, do you feel that the trans is damaged?
Any suggestions? Thanks for taking the time. Dennis
If you turn any axle flange forward, the opposite side turns backwards. This is normal. That is the way differentials work. You would have to turn both sides in the same direction at the same time. Try applying tension to both drive flange so one cannot turn without the other and power should transfer to the output shaft at the torsen differential.
th-cam.com/video/VN4_asSBEKY/w-d-xo.htmlsi=T8878DMp94L0eVt7
Thank you for this video! This has been a great bit of help. While not exact, there is a lot of overlap here with the 01E CBD found in the C4 S6 (URS6). Curious if there is any interchangeability between the synchos for this one and mine.
Sorry, I don't know. I only have access to the C5 A6 and B5 A4. There is a website that tell the difference between various build but I did not save it. Try Google, you may find it. Thanks for watching.
@@pnswg01 I think I did. Its 12v.org. they have some interesting stuff about the differences between them! Would love to see more content like this!
Awesome.....still don't understand but great!!
It is always better when you have the actual gearbox/transmission in front of you and experiment with it.
No doubt will be watching it again...and again...
Great explanation of how the transmission works. But what fluids should it be filled with? Does the center differential torsen have any special oil, or does it share oil with the front differential and the gearbox? Thank you.
I use Fuchs gear oil or the one from the dealer which is probably made by Fuchs.
There is only one type of oil in this transmission. The automatic version made by ZF use auto trans fluid for the front section and gear oil for the rear (torsen diff).
@@pnswg01 There are disagreements about what viscosity to use, 75w90 or 75w80? gl4 or gl5?
@@raulgambramartinez65 I am not a transmission repair person so I can only speak about what I use. I tried Redline after rebuild and that was the worst. I changed that real quick because shifting was not good especially from 1st to 2nd and when it's cold. I replaced it with Fuchs 75w90 and that was a night and day difference. The next time I changed it I went with the one from the dealer. (I didn't see any difference between the dealer oil and the Fuchs)
As for GL4 or GL5, I don't remember.
Is Volkswagens FRK 6 speed transmission same as this 01E from Audi?
I have a 2004 passat 1.8t 4motion with one of these in it. Seems to be a rare car
What kind of axle flange is that please? I have an 01E with round cups.
On my C5 AR
Fantastic, I need to learn from you and questions to be answered
Very Helpful
Where I can buy the correct Bearings for an Rebuild?
JHM 🇺🇸 sell rebuild kits.
I know this vid is over three years old, but, are you/will you cover the tiptronic? I know that one is very complex.
No. I have 3 tiptronic (ZF 5HP19) only if one of them break and I decide to fix it myself.
There was a set of video's on TH-cam with a British guy explaining the sections and assembly procesures.
I believe Garry Ferrario did some repair on these but he never explain anything, just teardowns.
Super nice good work.
Thank you! Very helpful.
Thanks for watching.
so helpfull
thanx
Excellent video
domo arigato Mr. Roboto.
ロボットではなく、ありがとう。 私の名前はパトリックです。 日本から見てくれてありがとう
Robottode wa naku, arigatō. Watashinonamaeha Patorikkudesu. Nihon kara mite kurete arigatō
Great video.
Thanks
Thank you
È possivel eu fazer um swap de cambio automático para manual de uma audi 2.7 T?
É sim, da uma olhada nos fóruns que consegue achar todo o conteúdo sobre o o swap
@@italoschimitel mais desse aí 01e ??? 4x4???