Thank You! Two years ago I rebuilt the original engine from my 1974 Thing and your videos saved me from installing bad Chinese made parts-the vehicle runs perfectly, it had 64000 miles on it. I had purchased a " FOMUCKO" engine that was bad-I autopsied it and...well there was a lot wrong inside!!!
Hey Darren I. Just bought some total seal rings for my 2056 build I ported my head's and went with chromolly dual springs anyway wanted. To thank you for helping me last year with my motor I'm finally putting it all back together had to. Have my valve bosses cut down .I ordered new valve guides for them but can't thank you enough for building your motors on TH-cam .I just might make a video of my engine assembly Russell . From psl FL
this is a A&A Rotataing assembly it is 78x94 ,it was $800 for crank flywheel rods PC bearings & gasket set ,i have assembled 11 of there kits with moderate compression and have good luck , ,EGZE turned me on to them a few years ago,
I just started binge watching your videos to get schooled up on high performance vw stuff which I know little about. I am building a 78.4 x 92 thickwall engine this winter, and this video comes in perfect timing!! Thanks for posting this one up!! I have an NOS 110 engle cam on an EP12 blank that I was going to use for my split bus with a straight axle. But the consensus on samba seems to lean to the Web 218 cam. What would your preference be in this engine with dual Weber IDF's? Thanks in advance! Your videos are a wealth of knowledge!!!
Really glad to see the upload today! I realized I hadn't seen any from you in a while and saw you were commenting on your last video. I hope all is ok and am really glad you are back!
Just noticed ur name Darren as well ur video are vary help full I have a 2500 vw in my sand rail want to turbo it but don't wanna hurt or lose its reliability what is ur thoughts
Yes, Yes , Yes, He's back in the garage and hitting that record button. Great to have you back. I was getting ready to text you again and see if you were ok. Your videos never get old. - KEEP DUBBING -
Just started to get into the VW aircooled been watching your videos for the past month getting ready the rebuild a 67 Baja wlith a 1600. Good seeing you putting together more videos
Darrin Love your Videos they never get old! built my first complete engine this year witch turned out Great ! with all the knowledge and tips from you and the EZGZ.
Love it bud thanks for all the good videos love learning everything i can on these Volkswagen engines gonna build me a race car with one in the near future
Yes! Hey Darrin good to see a video man!
Thank You! Two years ago I rebuilt the original engine from my 1974 Thing and your videos saved me from installing bad Chinese made parts-the vehicle runs perfectly, it had 64000 miles on it. I had purchased a " FOMUCKO" engine that was bad-I autopsied it and...well there was a lot wrong inside!!!
very cool
Great to see you Darin ! Here it’s dang cold in Iowa.
Thanks for your shit....nice to see a guy who knows his shit....
Sweet, you’re back! Sure have missed watching your videos!
Glad to see your back.
Look who's back
Always great to watch you build another engine I always learn so much. Thank you brother.
Hey Darren I. Just bought some total seal rings for my 2056 build I ported my head's and went with chromolly dual springs anyway wanted. To thank you for helping me last year with my motor I'm finally putting it all back together had to. Have my valve bosses cut down .I ordered new valve guides for them but can't thank you enough for building your motors on TH-cam .I just might make a video of my engine assembly Russell . From psl FL
Great to see you doing well!
Awesome to have you back , looking forward to this build !
Wow Darrin I was wondering how you were doing. Been too long man! -Glen
Good to see you back on the tube Darrin. Make a video of the bus motor I want to see what you came up with. Keep the videos coming.
So weird I was just wondering where you had been... 😀😀😀
Did you ever get that 2110 motor built for the guy that said he wanted to be able to beat the crap out of it?
Thanks for the video Darrin.hope all is well.
nice H rods are those cruella or a cheaper one.
this is a A&A Rotataing assembly it is 78x94 ,it was $800 for crank flywheel rods PC bearings & gasket set ,i have assembled 11 of there kits with moderate compression and have good luck , ,EGZE turned me on to them a few years ago,
Thank god you alive man! Don’t do that to us! Great to see you back!
Nice video. Thanks for posting Darrin.
OH MY GOD! DUUUUUUDE YOUR ALLIIIIIIIIIVVVVVEEEEE!! So. Yes. I'm happy your back and havent touched my own 73' as41 yet. Trike.
Good to see you again, vwdarrin! That case is a neat piece of VW history.
Nice to see you back my brother....I’ve missed your work
Dude, swear I woke up this morning thinking how you must be doing. 👍🏼
Hey Darrin, good to see a video from you 👍👍
On vws
G'day Kevin from Australia. Missed your videos. Worth the wait 👍
Ahh. 6 months is like 2 weeks around here.
Yeah baby. OG is back!
You have been missed my friend
Really great to see a video from you. Looking forward to seeing the stroker build.
Great vid sir, look forward on more this build!!
Good to see you back in the shop.
Lets see the bus motor.
I just started binge watching your videos to get schooled up on high performance vw stuff which I know little about. I am building a 78.4 x 92 thickwall engine this winter, and this video comes in perfect timing!! Thanks for posting this one up!! I have an NOS 110 engle cam on an EP12 blank that I was going to use for my split bus with a straight axle. But the consensus on samba seems to lean to the Web 218 cam. What would your preference be in this engine with dual Weber IDF's? Thanks in advance! Your videos are a wealth of knowledge!!!
Keep the videos coming been to long!
Hey Darrin, you made mention of the cylinders wanting the ''B's" in stead of 'A's". What is the difference??
Hey Darrin, good to see you back buddy! I've been real slack on making vids.
was wondering if you was doing ok .lets see some update videos buddy .
Welcome back Darrin, a lot of love here definitely. The smaller plug on those head would be what size 12 or 14?
Really glad to see the upload today! I realized I hadn't seen any from you in a while and saw you were commenting on your last video. I hope all is ok and am really glad you are back!
Just noticed ur name Darren as well ur video are vary help full I have a 2500 vw in my sand rail want to turbo it but don't wanna hurt or lose its reliability what is ur thoughts
Those cases has problems with the oil pump holes lining up with the pump and the distributor drive was tight.
Welcome back
ty for the vids , Regards John ( xmodriver )
Hey hey Mr. D!!
Hey brother good to here you man we need to push that button more often.
Can you help me identify a crank and cam don’t know where I could put a picture. Can’t really see what’s on the crank but 10D
And cwc cam ?
Its great to see you back! I hope you've recovered from the surgery. Looking forward to more videos from you.
Hey Darren-man have I missed seeing your insights on vw’s. Hope you are well. Dp
Welcome back !!! We missed you !!! All we had was EZGZ
Glad you got out of your hiatus looking forward to more of your videos
Thanks again for another great video
The Man The Legend is back!!!!!!!
Heeeeeeelllooooo! please make more vids dude!
Glad to see you back, when can we see that Nova?
Glad to see you back!
The KING is alive !!!!!
Amen. Been missing the videos
You sound great
good to see you
You're back!
Good to see you again buddy!
hey ,there u r
Glad to see you back
2165 is a fun engine!
A brother good vid
Hey Darrin, do you have an email that i can use to contact you, got some questions about a future build.
Good to see you back.
Looks good
Hell yes! A VW Darrin motor build!
Alright!
Yes, Yes , Yes, He's back in the garage and hitting that record button. Great to have you back. I was getting ready to text you again and see if you were ok. Your videos never get old.
- KEEP DUBBING -
👍🏽👍🏽
STROKE!! STROKE!! STROKE!! Awesome seeing you in the shop!!
It is awesome to see you are doing well buddy.
Thank you for the video. :-)
I was in your town last week.. tried to call. I'll be back down in a couple of months.
Just started to get into the VW aircooled been watching your videos for the past month getting ready the rebuild a 67 Baja wlith a 1600. Good seeing you putting together more videos
Yes, please do share more videos of this build. I'll be very interested to see you gauging the CC like you mentioned too.
I am so happy to see you back in front of the video camera. I hope all is well. You've been missed by many, including me. Welcome back!!!
Darrin Love your Videos they never get old! built my first complete engine this year witch turned out Great ! with all the knowledge and tips from you and the EZGZ.
Good to see a video buddy!
so i got a vw baja bug and a weber 40 idf on it. It bogs down whenever i give it too much gas. Would you have any idea why? Its is running rich.
Joshua Owens yes you will need to lean the needles down
@@goober20001 Could you email me at Owens.josh2001@gmail.com
I have so many questions. haha
Glad to see you back on TH-cam. Can you make videos more often, twice a week would be cool. Even if it is just stories of the old day would be cool.
Glad you're back online. Looking forward to seeing more.
Long time,no see. Hope your back is doing well. More VW please,, your expertise and experience needs to be passed on.. never owned one,yet??ed.
Nice -
Sounds like ur health is good !!
Glad to a video !!
Good to see you back Darren, missed your vids man. Keep the record button pressed please!
Love it bud thanks for all the good videos love learning everything i can on these Volkswagen engines gonna build me a race car with one in the near future
Don’t leave it another six months for a vid eh....good to see ya...
Glad to see you back!!! Man I miss your videos!!!
long time no see Darrin my friend! great video.
Good to hear from you, thanks Darren
Glad to see you back again! Missed ya man!
Good to see you back at it Darrin.
awsome thank you sir great to see you back.
Seeing you on my list put a smile on my face!
Glad your back 👍👍👍
Glad to see you back.
Nice to a video!
How do I get in touch with Need to rebuild my vw engine out here in AZ.
Contact Chirco in Tucson, AZ.
Local: 520-722-1984
Toll Free: 800-955-9795
Website: chircostore.com
Nice!