Wow, thats pure ingenuity. Turning an old battiery into an empty box for a new battery and solving the environmental problems of flushing acid and throwing lead and plastic on the ground by a label in the video saying "be cautious on battery waste". When bilding such a lithium battery, a proper box or housing usually would be the cheapest part.
@@Snowaxe3DObviously I am from a part of the world where we do not promote it as an ingenious idea to poison the water we drink and the ground our kids play on. Of course we do a lot of harm here to the environment too, but does that mean we have to like it and do it for no reason?
I made the same project for my car battery last year using the same old battery case. It have 16 cells inside, about 12volt 20ah enough to crank the car for about 8 times in one session. The performance was much greater because it didn't slowly discharge like lead acid and it cranks smoothly. I used special BMS that can support up to 800Amp (as per seller claim). You idea of only using active balancer was good too, never thought of that. You should properly dispose the old acid to protect the environment. I kept the old acid solutions inside my empty shower bottle. You can use them later on for plating purposes. The lead also can be melt and recycle for other suitable DIY project or sell them to recycling center.
I will actually use it on a spot welder, that's why I don't use BMS and put voltmeter.. but yes it really good battery replacement on our car battery..
@@aznative_ so far so good. No modification done at all on car alternator. I'll share some quite ugly pictures of the battery before the new modications to beautify it. th-cam.com/users/shortsbauGhizjiIY?feature=share I totally forgot to snap the 'after' pictures and video of the new modifications. Sorry for that. Hopefully I'll upload that in near future.
For how much amount such a battery 12v,100 AH can be procured with complete address of the person/ shop from whom a fully robust battery can be procured.
Be cautious on battery waste? Dump the acid on the earth. lol ok Kudos....Great work.. Glad to see you using what you learned about electronics....Creating is living...
--- Did you really wash away the old acid with a water hose? I am shocked. --- Hast Du die Alte Säure wirklich mit einem Wasserschlauch weggespült? Ich bin fassungslos.
Nice, if you put the empty case in the freezer for a few hours the cell dividers will shatter like a piece of glass, almost. Side cutters will clean up the edges. I put 1.2 styrofoam in the bottom 12v22ah sla battery. Screwed the lid on so I can reuse the case down the road.
Looks like a nice project but question is is it cheaper to make one or could you just buy that unit already assembled most people don't have the knowledge to do what you do I think Safeway would be by unit intact
Shows you have intelligence with knowledge. How much did all the materials cost including the hardware? How long did your battery last when driving? Did you have any problems of temperature and shocks of the car shaking it up? How long and how did you keep it charge or how long did the charge last? Keep adding your videos. Well done.
Battery last while driving? It cannot be use. Because unlike lead acid battery, lithium battery cannot tolerate all the Heat from the engine and will quickly damage the battery.
In certain countries, you can cut one open and dump the old contents anywhere, making the project viable. But you can only do that in Europe if no one sees you, like fly tipping.
Interesting but I wonder was it worth the time and expense, also a couple of things I noticed, the charge controller doesn't seem heavy duty enough to replace the power used, the other is that those wires to the terminals don't look thick enough to carry the 100A+ the starter needs, I suspect the whole thing would go up in smoke if fitted.
Great Build. If I may add, LIPO is not good when exposed to heat for a long time, engine bay is not a good place for it. I would relocate it to the trunk for batteries longetivity.
I'm happy you didn't use the ordinary 18650 but yes... I doubt these batteries will suit the requirements of most 12v appliances, these batteries have a huge voltage range, you probably need a lot of diodes and boost converters for it to suit an inverter or smth but again.. because your application is a spot welder ig it's fine
Es muy ingenioso, pero poco educativo en cuanto a la protección del medio ambiente. Básicamente por el mal manejo de los desechos de la batería, que son vertidos directamente al suelo, y que es conocido por la mayoría de las personas el grado de peligrosidad de los mismos. Incluso no se ve que vista equipo de protección adecuado para evitar algún tipo de lesión o daño a si mismo.
Theres no way those delicate connections and microcontrollers would hold up to an automotive application. The temperature extremes and road vibrations would kill it pretty quickly. it would need to be an vibration isolated reinforced circuit and enclosure. not to mention like others said... just use another plastic box. no need to pollute and use a car battery shell.
Lithium batteries aren't high amperage drain batteries either. More of a deep cycle steady drain battery. They do sell Super Caps that work with your Lithium battery and will store the surge needed to crank a car.
In everything you said, nothing is accurate....for the temperature, there is a solution you can put inside your car or you can put a heat absorber around it...for the vibration, there is no problem as long as you are properly positioned inside of the container and it doesn't move, I'm sure the wire and batt cells won't be damaged ... as for using another box, you'll have a hard time molding a container while the container of your old battery is already molded into your car... The circuit that you are talking about has specs, all of them must be correctly installed, there is another 200AH that can be purchased and the one that is installed is an active balancer for each cell so that the charging is equal in every batt cell norhing more nothing less....you have many problems, all of them can be solved.
I have Minder RC DH30 Max with the highest capacity and it can weld 0.2mm pure nickel strip at highest setting but i had to do a small change. When i was spotwelding my battery pack for portable speaker, the board just started smoking. Than i discovered, the manufacturers does not know the ammount of current going from the battery, via the traces on the PCB to the leads. You need to add a bit of solder along the entire lenght of the traces, positive, negative and MOS's. The you'll be safe to solder but i reccomend to spot like 15 spots and then wait a bit for the temp go down. Otherwise you could destroy it. I don't know the other spotwelders but this one from alliexpres doing its job like it shoul be.
@@samohraje2433 thank you for the response! For me it seems you show two different spot welders the one you build it with and then another one you plug to the battery at 08:15 Which one do you consider better? thx
There is no need in it - this battery will die before it will need a balance :) It’s to hot under there, it will be overcharged, vibration. All of this will this pack quick enough and hopely won’t explode/burn.
Idea to convert old Lead -Acid battery case into a new case for Lithium Battery is trustworthy. But, in video, no description given for viewers how to assemble. Lithium battery needs a good BMS. Wherefrom BMS is available not defined. And the battery's capacity, voltage, etc. not presented. So it is unacceptable for many.
Muy interesante la combersion, pero una versión en Español puede resultar más interesante todavía. Y las informaciones para adquirir los materiales en cuestión. Muy agradecido. Desde CDE. Paraguay.
Many questions come to mind, does it recharge with the alternator? Does it get hot? how long does it last using headlights and electronic components in the car? does it work on winter/cold/snowy places? is it reliable for long trips... 🤔🤔
И? Во сколько обошлось покупка 64 элементов и контроллера зарядки? Этот аккумулятор заведёт машину при морозе -20'С? Не проще ли сдать старый, и купить новый свинцовый?
You will fry your alternator if you charge with it. Too small internal resistance. There are ways, though. Try searching "charging lithium batteries with an alternator" .
Wow, thats pure ingenuity. Turning an old battiery into an empty box for a new battery and solving the environmental problems of flushing acid and throwing lead and plastic on the ground by a label in the video saying "be cautious on battery waste".
When bilding such a lithium battery, a proper box or housing usually would be the cheapest part.
Environment? Lol what part of the world are you from that doesn't damage the "environment"?
@@Snowaxe3DObviously I am from a part of the world where we do not promote it as an ingenious idea to poison the water we drink and the ground our kids play on.
Of course we do a lot of harm here to the environment too, but does that mean we have to like it and do it for no reason?
Should be Tibetian :D@@Snowaxe3D
This guy is no ordinary.he must have a good background in electricity science.tq
I made the same project for my car battery last year using the same old battery case. It have 16 cells inside, about 12volt 20ah enough to crank the car for about 8 times in one session. The performance was much greater because it didn't slowly discharge like lead acid and it cranks smoothly. I used special BMS that can support up to 800Amp (as per seller claim). You idea of only using active balancer was good too, never thought of that.
You should properly dispose the old acid to protect the environment. I kept the old acid solutions inside my empty shower bottle. You can use them later on for plating purposes. The lead also can be melt and recycle for other suitable DIY project or sell them to recycling center.
I will actually use it on a spot welder, that's why I don't use BMS and put voltmeter.. but yes it really good battery replacement on our car battery..
@@albertnario4877 ohh.. that's why 👍
That's really cool. Are there any issues or modifications needed to charge from the alternator?
@@aznative_ so far so good. No modification done at all on car alternator. I'll share some quite ugly pictures of the battery before the new modications to beautify it.
th-cam.com/users/shortsbauGhizjiIY?feature=share
I totally forgot to snap the 'after' pictures and video of the new modifications. Sorry for that. Hopefully I'll upload that in near future.
For how much amount such a battery 12v,100 AH can be procured with complete address of the person/ shop from whom a fully robust battery can be procured.
Ang galing naman nito... iba Ang talent mo boss
🔥 Just 1 cell bursts and catches 🔥, by by car!
Is there a parts list. I would love to build one for my 12v accessories. While camping
Baterie.de mașină, ești un fenomen.
Be cautious on battery waste? Dump the acid on the earth. lol ok Kudos....Great work.. Glad to see you using what you learned about electronics....Creating is living...
Be careful and don't get it on you, or in your eyes.
The earth will be fine
What parts did you use and what is the final spec of the battery?
Congratulations. Good job.
Could you list, parts for battery build and especially spot welder
Ești un geniu. Ce e asta, dacă nu greșesc, e un generator.
Love the ending. Lithium Inside. 😅
This guy is either an electrician or a genius! Lol
--- Did you really wash away the old acid with a water hose? I am shocked. ---
Hast Du die Alte Säure wirklich mit einem Wasserschlauch weggespült? Ich bin fassungslos.
Nice, if you put the empty case in the freezer for a few hours the cell dividers will shatter like a piece of glass, almost. Side cutters will clean up the edges. I put 1.2 styrofoam in the bottom 12v22ah sla battery. Screwed the lid on so I can reuse the case down the road.
Super awesome job 👍
watch my channel if you like subscribe please th-cam.com/channels/6mvqw0k3A2EbIGiB3I99UA.html there is still a lot of interesting things ahead
Amazing how his toes haven’t rotted away.
Looks like a nice project but question is is it cheaper to make one or could you just buy that unit already assembled most people don't have the knowledge to do what you do I think Safeway would be by unit intact
Smart idea! Well done! Thanks for your video! 😀👍
Pretty stealthy too!
What about battery balance ???? or in case of fire ??
Bro for 1sm battery, what will be the max AH setup?
Shows you have intelligence with knowledge. How much did all the materials cost including the hardware? How long did your battery last when driving? Did you have any problems of temperature and shocks of the car shaking it up? How long and how did you keep it charge or how long did the charge last? Keep adding your videos. Well done.
Battery last while driving? It cannot be use. Because unlike lead acid battery, lithium battery cannot tolerate all the Heat from the engine and will quickly damage the battery.
@@xsauce3858you don't have to put the battery side to side with the engine, you can place it somewhere inside the cabin.
Good idea , that way when the battery explodes it wont hurt the dirty side of your firewall..
Thank you for this share, I liked so much
watch my channel if you like subscribe please th-cam.com/channels/6mvqw0k3A2EbIGiB3I99UA.html there is still a lot of interesting things ahead
Mantab proses laporannya.
"Be cautious on battery waste" procedes to tip all over ground "
Security. Fix it in the boot of the vehicle with extension wires less heat and vibrations. .
watch my channel if you like subscribe please th-cam.com/channels/6mvqw0k3A2EbIGiB3I99UA.html there is still a lot of interesting things ahead
Can UPS 600VA battery for computer to lithium battery?
In certain countries, you can cut one open and dump the old contents anywhere, making the project viable. But you can only do that in Europe if no one sees you, like fly tipping.
just a sugestion you could add a touch button to turn off the voltage indicator and use the sealing spray to make it waterproof
Interesting but I wonder was it worth the time and expense, also a couple of things I noticed, the charge controller doesn't seem heavy duty enough to replace the power used, the other is that those wires to the terminals don't look thick enough to carry the 100A+ the starter needs, I suspect the whole thing would go up in smoke if fitted.
I did the same with 18650 (2500 mAh LG) batteries few years ago, it lasted only 6 months. It's a lot cheaper to use accumulator (car battery)
best video on youtube. how many CCA?
Great Build. If I may add, LIPO is not good when exposed to heat for a long time, engine bay is not a good place for it. I would relocate it to the trunk for batteries longetivity.
Great job 👌
watch my channel if you like subscribe please th-cam.com/channels/6mvqw0k3A2EbIGiB3I99UA.html there is still a lot of interesting things ahead
How long will it last against the heat?
I'm happy you didn't use the ordinary 18650 but yes... I doubt these batteries will suit the requirements of most 12v appliances, these batteries have a huge voltage range, you probably need a lot of diodes and boost converters for it to suit an inverter or smth
but again.. because your application is a spot welder ig it's fine
Well done 👍🏻👍🏻 🇮🇳 || Kuki 08|03|2022
Ang lupit mo pre...
Why not buy lithium battery with a warranty?
How much the weight of battery reduced?
Es muy ingenioso, pero poco educativo en cuanto a la protección del medio ambiente. Básicamente por el mal manejo de los desechos de la batería, que son vertidos directamente al suelo, y que es conocido por la mayoría de las personas el grado de peligrosidad de los mismos. Incluso no se ve que vista equipo de protección adecuado para evitar algún tipo de lesión o daño a si mismo.
भाई, जब्बर जस्त काम किया।
Hi, are you using this battery at your car still?
What cells?
nice video sir ! 👌
th-cam.com/video/QcwfiGCd_qE/w-d-xo.html
nossaaa demais ser humano e muito inteligente 🥁🥁🥁🥁
Cleaning on the floor: you are unconscious.
How long will last? cost? …Why the car industry does not used then???
How many Time have a charge ?🙂
What tool are you using to weld the batteries strips together?
Hi. It's called a spot welder. You can make one yourself from a microwave transformer
@@rscervin9950 Ty
Youuu to be...... I'm ready for the cardboard jet... They do a good job at hiding the string
Nice idea and smart..
((( But this dangerous because in a high weather or from engine..)
Helping Others In Their Tough Of Need Is The Best Gift Of Humanity So Your One Click Can Change Whole Life ♥️ ♥️ ♥️🙏🙏
Theres no way those delicate connections and microcontrollers would hold up to an automotive application. The temperature extremes and road vibrations would kill it pretty quickly. it would need to be an vibration isolated reinforced circuit and enclosure. not to mention like others said... just use another plastic box. no need to pollute and use a car battery shell.
Lithium batteries aren't high amperage drain batteries either. More of a deep cycle steady drain battery. They do sell Super Caps that work with your Lithium battery and will store the surge needed to crank a car.
watch my channel if you like subscribe please th-cam.com/channels/6mvqw0k3A2EbIGiB3I99UA.html there is still a lot of interesting things ahead
He's using it to power a spot welder -- hence the voltmeter. The automotive demonstration was just to show off that it can even start a car.
Only a temporary battery, you get a couple of uses out of it.
In everything you said, nothing is accurate....for the temperature, there is a solution you can put inside your car or you can put a heat absorber around it...for the vibration, there is no problem as long as you are properly positioned inside of the container and it doesn't move, I'm sure the wire and batt cells won't be damaged ... as for using another box, you'll have a hard time molding a container while the container of your old battery is already molded into your car... The circuit that you are talking about has specs, all of them must be correctly installed, there is another 200AH that can be purchased and the one that is installed is an active balancer for each cell so that the charging is equal in every batt cell norhing more nothing less....you have many problems, all of them can be solved.
Which of those spot welders do you recommend? Do you have a link to them?
I have Minder RC DH30 Max with the highest capacity and it can weld 0.2mm pure nickel strip at highest setting but i had to do a small change. When i was spotwelding my battery pack for portable speaker, the board just started smoking. Than i discovered, the manufacturers does not know the ammount of current going from the battery, via the traces on the PCB to the leads. You need to add a bit of solder along the entire lenght of the traces, positive, negative and MOS's. The you'll be safe to solder but i reccomend to spot like 15 spots and then wait a bit for the temp go down. Otherwise you could destroy it. I don't know the other spotwelders but this one from alliexpres doing its job like it shoul be.
@@samohraje2433 thank you for the response! For me it seems you show two different spot welders the one you build it with and then another one you plug to the battery at 08:15
Which one do you consider better? thx
Much better they have switch for voltage display indicator, since they consuming current when not in used
watch my channel if you like subscribe please th-cam.com/channels/6mvqw0k3A2EbIGiB3I99UA.html there is still a lot of interesting things ahead
Remember boys and girls.....there are some people on this earth right now....that thing "given enough time, this battery could create itself".
Sir nasa magkakano po ang nagastos po nio lahat para s mga materials lang na nagamit po ninyo?
How do you balance charge it? You would need a balance cable with 48 wires coming off of that.
There is no need in it - this battery will die before it will need a balance :) It’s to hot under there, it will be overcharged, vibration. All of this will this pack quick enough and hopely won’t explode/burn.
I installed extra balance wire that can be accessed on plastic screw.
good work
plastic inside battery can melt if soldered
Nice
Trông đơn giản nhưng công nghể phức tap .quá chi tiết kỹ cáng đúng là phải hoc mới biết mà làm
How to make waterproof battery?
Nice conversion bro, can you build a 100Ah LifePo4 battery with BMS? Excellent video bro, thank you sir.
Do you have a link to the spot welder you use?
yes, that is indeed a nice spot welder. I too would like one.
I do need that same .
Good show ! Thanks.
Idea to convert old Lead -Acid battery case into a new case for Lithium Battery is trustworthy. But, in video, no description given for viewers how to assemble. Lithium battery needs a good BMS. Wherefrom BMS is available not defined. And the battery's capacity, voltage, etc. not presented. So it is unacceptable for many.
watch my channel if you like subscribe please th-cam.com/channels/6mvqw0k3A2EbIGiB3I99UA.html there is still a lot of interesting things ahead
Also is questionable how this will perform under freezing temperatures .
What BMS to use ?
Very educative
watch my channel if you like subscribe please th-cam.com/channels/6mvqw0k3A2EbIGiB3I99UA.html there is still a lot of interesting things ahead
It does not show the water solvable lead that is installed in the lead grids
That Yellow connector Is not good for strong current.
Costs???
Way cool!!!
Bhav su 6 ?
Muy interesante la combersion, pero una versión en Español puede resultar más interesante todavía. Y las informaciones para adquirir los materiales en cuestión. Muy agradecido. Desde CDE. Paraguay.
esto video hecho en Filipinas (Philippines), el persona que fabricado el batteria en video es un Filipino.
Legal amigo
Awesome
th-cam.com/video/QcwfiGCd_qE/w-d-xo.html
What is the cost of this battery
fire, waiting to happen
Love it
watch my channel if you like subscribe please th-cam.com/channels/6mvqw0k3A2EbIGiB3I99UA.html there is still a lot of interesting things ahead
Merci beaucoup pour l'explication
watch my channel if you like subscribe please th-cam.com/channels/6mvqw0k3A2EbIGiB3I99UA.html there is still a lot of interesting things ahead
MAG KANO PO PABUILD NG GANYAN SIR ?
Many questions come to mind, does it recharge with the alternator? Does it get hot? how long does it last using headlights and electronic components in the car? does it work on winter/cold/snowy places? is it reliable for long trips... 🤔🤔
it's been in my car for several months.. It did not get any issues using it... but we don't have winter.
yeah we don't have winter here in Philippines, always summer and rainy season
if you replace it with 33140 lithium battery, it will be much lighter and tastier, capacity 90 ah/h
watch my channel if you like subscribe please th-cam.com/channels/6mvqw0k3A2EbIGiB3I99UA.html there is still a lot of interesting things ahead
И? Во сколько обошлось покупка 64 элементов и контроллера зарядки? Этот аккумулятор заведёт машину при морозе -20'С? Не проще ли сдать старый, и купить новый свинцовый?
А ещё проще использовать лошадь и телегу
This is what you normally get when you order a car battery on ebay🤣
watch my channel if you like subscribe please th-cam.com/channels/6mvqw0k3A2EbIGiB3I99UA.html there is still a lot of interesting things ahead
Good day, what are the links for the parts and devices that you used in the make?
Can you only use this battery to jumpstart the car or is it set up that the alternator can charge it like a normal car battery?
You will fry your alternator if you charge with it. Too small internal resistance. There are ways, though. Try searching "charging lithium batteries with an alternator" .
Hi,perfect job.
How much is convert in 200AH?
watch my channel if you like subscribe please th-cam.com/channels/6mvqw0k3A2EbIGiB3I99UA.html there is still a lot of interesting things ahead
I only came to write that only legends understand the thumbnail. “Pentium inside”
swietny pomysl -prosze o schemat polaczen-pozdrawiam
Could be this lithium battery a potential bomb if the temperature of the motor rise up or heat up?
no
He tacks on the metal then bends tab and folds over.this can cause oxidation failure.he should add wire before foldong
"Lithium Inside" More like Intel inside
Hi where can get the welder and meterials?
Amazon spot welder
Do Not Dump the acid on the Ground! Dispose of it correctly.
watch my channel if you like subscribe please th-cam.com/channels/6mvqw0k3A2EbIGiB3I99UA.html there is still a lot of interesting things ahead
can you tell me brand name & model number of spot welder ? can you give me link to buy it?
watch my channel if you like subscribe please th-cam.com/channels/6mvqw0k3A2EbIGiB3I99UA.html there is still a lot of interesting things ahead
Top demais né