HUSKY 15-in-1 Painter's Tool - Review - BEST TOOL EVER? Ninja Blade Inside???

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 มิ.ย. 2024
  • HUSKY 15-in-1 Painter's Tool - BEST TOOL EVER? Ninja Blade Inside???
    Link to this tool at Home Depot: www.homedepot.com/p/Husky-15-...
  • บันเทิง

ความคิดเห็น • 59

  • @rowdy3837
    @rowdy3837 2 ปีที่แล้ว +26

    The purpose of the roller cleaner isn’t to save the roller but to save the excess paint it holds. You’d be surprised how much you get out of a used roller. Great video!

  • @NMcCauley
    @NMcCauley 8 หลายเดือนก่อน +2

    Such an underrated tool… it comes in handy every every single time 👍

  • @edstevens6839
    @edstevens6839 2 ปีที่แล้ว +5

    I use the edge close to the narrow curve to get the paint out of the gap of gallon paint cans before closing the can back up.

  • @ebbrown8771
    @ebbrown8771 5 หลายเดือนก่อน

    This was super helpful. I had no clue, I use the tip to rip painters tape with the crisp edge, but that was about it… Thank you so much for this video.

  • @rafaelakayuco9042
    @rafaelakayuco9042 3 ปีที่แล้ว +5

    Probably the most useful tool I own.

    • @TheTruckGuy
      @TheTruckGuy  3 ปีที่แล้ว

      Very, very true sir!

  • @juansaydeflores890
    @juansaydeflores890 2 ปีที่แล้ว

    bought one this weekend.. helps to have the rigth tool for the job.

  • @KW-jq5je
    @KW-jq5je 3 ปีที่แล้ว +17

    I just bought one for backpacking. I'll be testing it for: Pulling tent stakes, shaving fire starters, digging hole for bathroom, splitting small sections of branches for a wood stove, cutting cord and rope, removing weeds from a tent site, fighting off gangs of zombie armadillos.
    It should be interesting.

    • @TheTruckGuy
      @TheTruckGuy  3 ปีที่แล้ว

      That will be great to see how it works out - I could see plenty of uses for it. I think this plus a utility knife could solve pretty much any job out there. Let me know how it works out K W! Also, hit me up with a subscribe if you can.

    • @sheenanakahira7792
      @sheenanakahira7792 2 ปีที่แล้ว

      How did it go? Was it useful during your canping?

    • @smirage22
      @smirage22 ปีที่แล้ว

      @@sheenanakahira7792 I think he's still in the woods

    • @MasterYoist
      @MasterYoist ปีที่แล้ว +1

      @@smirage22 the zombie armadillos might have got the best of him.

  • @daiiahi3403
    @daiiahi3403 2 ปีที่แล้ว +2

    The concave works well on galvanized pipe railings. Remove old paint and primer.

  • @djjinerson
    @djjinerson 2 ปีที่แล้ว +5

    He said “stiff tool” he he he he (Bevis voice) very useful tools for sure nice vid

  • @ARusso702
    @ARusso702 5 หลายเดือนก่อน

    💣 I've actually had this tool for a while now and it is amazing. And you are right it has everything you need and I paint all day everyday as well as texture I do everything and this tool is far better then any other 5 in 1 etc out of all the others five in ones putty knives whatever .. This man IS absolutely right!! trust me great tool!! I use it for everyday I paint everyday Etc it's amazing tool don't waste your money on all those other cheap cheap ones like I have in the past and since I've had this one for over a year now and it's still in great sturdy perfect working condition this guy is giving you the gospel

  • @BlessedNess9619
    @BlessedNess9619 ปีที่แล้ว +1

    For the concave edge I would use for my clothing rod if I wanted to repaint it for my closet. I painted mines.

  • @MistikButterfly
    @MistikButterfly 11 หลายเดือนก่อน

    Awesome video. Thank you. 😌

  • @babywise2096
    @babywise2096 2 ปีที่แล้ว +3

    The radius scraper works good on colums and metal or wooden rails, things like that

  • @losmoore3358
    @losmoore3358 2 ปีที่แล้ว

    Is there a couple of areas that could be sharpen?

  • @donaldbegs6516
    @donaldbegs6516 6 หลายเดือนก่อน +1

    I got it for $4.98 at Home Depot.

  • @practicalguy973
    @practicalguy973 2 ปีที่แล้ว +3

    I think I prefer something with less holes in it so it can be used better as a spreader and pry tool. Those screw drivers in the handle are a real stretch from the Husky designers imagination. I kind of like the 3" Red Devil 6251 EZ Grip Multi-Purpose Painter's Tool. Simple and less holes!

    • @rubiconoutdoors3492
      @rubiconoutdoors3492 10 หลายเดือนก่อน

      I like the simple folding pocket knife verdion of it.

  • @chrisdenney4182
    @chrisdenney4182 2 ปีที่แล้ว +2

    If I were abandoned on a desert island and could only have 1 hand tool, it would be a painter's tool.

  • @dustinhartley8988
    @dustinhartley8988 3 หลายเดือนก่อน

    I just picked up a few on clearance for 3 bucks. Ayoooo. Im hoping theg come out with a new one

  • @dangoss7180
    @dangoss7180 2 ปีที่แล้ว +2

    Actually would not be bad as hiking/camping, but out bag think. It’s pretty light. A thing you can beat up , instead of your big knife. I’d use it to scrape off bark or split small logs. And other things can be thought up.

    • @TheTruckGuy
      @TheTruckGuy  2 ปีที่แล้ว

      Agree. In my opinion, this plus a utility knife for camping, and you're set for a successful trip.

    • @dangoss7180
      @dangoss7180 2 ปีที่แล้ว

      @@TheTruckGuy it’s funny how the years go by and we realize what was right before us all along, are really good tools. I bought a Japanese pull saw. Sure enough the thing is a piece of cake. My go to for cutting small pieces when it’s not worth the trouble to pull out a power tool.

  • @justalurkr
    @justalurkr ปีที่แล้ว

    The concave scraper is apparently for scraping excess paint off a roller.

  • @XSwordOfWarX
    @XSwordOfWarX 2 ปีที่แล้ว +3

    I can't see many situations where those nut drivers would work. The tool is so big that you likely won't have room to turn the nut even if it fits. Eliminate those and the bottle opener so the tool can be smaller and less likely to poke you when it's on your pants. That screwdriver piece wasn't obvious for me either, funny thing is I can't even get it out without using another tool (maybe after the first time it's easier).

    • @RETRO-RANEYS-RESTORATIONS
      @RETRO-RANEYS-RESTORATIONS ปีที่แล้ว +1

      It's not for nuts it's for tightening or loosing your spray gun.🤫

    • @MyUnquenchableThirst
      @MyUnquenchableThirst 11 หลายเดือนก่อน

      I also would like to find one with a lot less holes. I hate that every manufacturer is putting a bottle opener on everything! Hole in the pummel sucks too cause you can't hit nails down

  • @stevejuststuff2779
    @stevejuststuff2779 2 ปีที่แล้ว +4

    Proudly brought to you straight from China.

    • @TheTruckGuy
      @TheTruckGuy  2 ปีที่แล้ว

      True.

    • @TheTruckGuy
      @TheTruckGuy  2 ปีที่แล้ว +1

      Please subscribe if you don't mind. Thanks Steve!

  • @edmerkel2407
    @edmerkel2407 2 หลายเดือนก่อน

    A few minutes with a benchgrinder, sander or knife sharpener turns this into a highly effective defensive weapon. It's probably not what Husky envisioned, of course.

  • @MyUnquenchableThirst
    @MyUnquenchableThirst 11 หลายเดือนก่อน

    I think the older one is better. Do you know where to find it?

  • @canolacola4353
    @canolacola4353 ปีที่แล้ว

    concave blade scrapes rails and bars . sharper corner gets into trimming, the edge a rough scraper, can opener on other corner, roller scraper to get paint back from roller, the hole in middle is to take out free spinning gyrock screws (missed shots when aiming for strappings)... pull while drilling, the metal butt can be used to close cans or even to indent screw holes after taking screws out to prepare for spackle. and they should have made a paint bucket opener instead of bottle opener. because paint buckets and mud buckets are just hell to open and close by hand all day. and the hex part can be sharpened into more detail dowel scrapers. they might be good for certain tools or to incorporate rods and nuts into your packout but i havent found greatest use yet for them

    • @canolacola4353
      @canolacola4353 ปีที่แล้ว

      besides metal butt falls off too easy u need to break it out and epoxy it back in

  • @emileo14260
    @emileo14260 3 ปีที่แล้ว +2

    Hoping the paint helps you save money on buying more paint

    • @TheTruckGuy
      @TheTruckGuy  3 ปีที่แล้ว

      Good point! I should try to save more paint. Hit me up with a subscribe if you don't mind.

  • @JoeyAdes
    @JoeyAdes 2 ปีที่แล้ว +1

    Works good as a scraper. But not good for spackle lol

  • @MasterYoist
    @MasterYoist ปีที่แล้ว

    Mine has a metal bit driver built into the handle. The nut driver tools on the side of the bladed area are a complete waste. The bottle opener is a complete waste. Other than that the tool is fine and can be really good at shaving and splitting wood when you need to do that.

    • @attainableaudio4533
      @attainableaudio4533 11 หลายเดือนก่อน

      Yes if they could have built a slotted (outlet and light switch covers) and standard Philips driver into it...

  • @GoodLaw
    @GoodLaw 2 ปีที่แล้ว +4

    Thank you for explaining the last 4 tools. I was so confused by the metal part on the handle. The worse part is I needed a flat head to take it out. Such a useless inconvenient tool.

    • @TheTruckGuy
      @TheTruckGuy  2 ปีที่แล้ว

      Completely agree! Thanks for watching, and please subscribe if you don't mind.

    • @bradleyr34
      @bradleyr34 ปีที่แล้ว

      I think the intention for the flathead blades is for switchplate screws. Gotta remove them to paint around the box, right?

    • @attainableaudio4533
      @attainableaudio4533 11 หลายเดือนก่อน

      ​​@@bradleyr34ust got one and tested the slot screw driver on a Philips and it does work on a pinch, on they can't be in that tight, and you wouldn't want to take out a long, or even a medium length screw, lol

  • @AereForst
    @AereForst ปีที่แล้ว +2

    16 in one. Self-defense tool if needed.
    I’m kidding.

    • @TheTruckGuy
      @TheTruckGuy  ปีที่แล้ว

      If need be, you are correct!

  • @papa-grammy
    @papa-grammy 8 หลายเดือนก่อน

    Sorry, I like to see examples...show me

  • @babywise2096
    @babywise2096 2 ปีที่แล้ว +1

    I keep losing the little star inside.. I lose tgese and rebuild them at leat every 4 months. It's a terrible spreader every thing else is ok

    • @TheTruckGuy
      @TheTruckGuy  2 ปีที่แล้ว +1

      Yeah, I agree the spreader leaves a lot to be desired. I could see losing the star, not my favorite design for the screwdrivers.

  • @michaelbluejay
    @michaelbluejay ปีที่แล้ว +2

    Even at 2x speed the video is still slow.

  • @Talaramama
    @Talaramama 5 หลายเดือนก่อน

    5:06 u put the hammer the other way round!!! Which means u rendered the tool useless and contradicted wat your talking about!!!

  • @cola617
    @cola617 2 ปีที่แล้ว +3

    Too lazy !! Talking more then action