⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: th-cam.com/users/AutoRepairGuys ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
You guys are doing an awesome job. I have an 06' E320 CDI and have used several of your videos to make repairs and do a little upholstery on the shift boot and console.
Not bad, but fairly rookie. First, this is a bumper cover being removed, not a bumper. You do not need to remove the bottom plastic grill covers at all and this is not part of the MB WIS instructions... and the way they are removed in this video is a good way to break them. They should NEVER ever be pried off. To remove them properly, you do it by releasing the top clips from the INSIDE of the bumper cover. You can access the two lower bumper cover bolts from under the car without removing that cover. You should also remove the wiring harness from the fog lamps, side marker lamps and temperature sensor BEFORE pulling the bumper cover, unless you want to tear the wires loose from the connectors and damage the wire seals.If you removed the harness first, this is easily a one man job.
@@kaufmankdk No, I did not do a video. I’m not sure a video could be taken, as there are two screws the in a blind spot. The WIS from Mercedes describes it best.
@@kaufmankdk Yes. It’s the “work instructions” provide by Mercedes to do any job on their vehicles. It can be purchased off eBay. They call them shop manuals.
So, Scott has nothing of value to contribute. Not part of a solution but only part of the problem. Thank you so much for your time. Please consider in the future to be positive and supportive or simply stay out of the form.
I have a 2004 e320 dash lights come on for a second then they turn off and nothing works the gages don't work turn signal don't work ac don't work windows don't work "car does start but you have to open and close switch more than once over and over but no dash lights or gages?
It's your 🔑. Buy a replacement body for the 🔑. If the ir leds don't line up just right you'll have those problems. Usually the key body gets worn down and causes the optical communication to fail.
I highly suggest that you learn the process from beginning to end before shooting the video. Saying "I forgot" or "I did x wrong" in a video and not editing that part out is an unwise decision.
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: th-cam.com/users/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Guess I'm first like and reply
I have used your videos several times to make repairs to my 2009 E350, always informed. Thank you
You guys are doing an awesome job. I have an 06' E320 CDI and have used several of your videos to make repairs and do a little upholstery on the shift boot and console.
This video helped me out a lot. Thanks fellas!
You guys ate best I just got 2004 mercedes e320 4matic
Would you guys mind posting up (I saw another vid on replacing the airmatic pump) the actuation leveling for the suspension?
You guys do great work. Thanks for your videos
had a front end damage an wanted to do the wrk. vid was help full
The right side of my bumper popped off a little bit and I thought it’d be as easy as my e36 or my Hondas… why can it be a 2 second fix 🤦🏻♂️😞
How good you speaking English!
Can you please make a video on how to replace the fender on a 2005 e320 cdi? Preferably on the front right. Please!
Wow great tips guys
another great video guys
Do you need to remove the bumper to change the HID Ballast on an 07 E63 AMG?
yes
Thanks for the video. Appreciate it
Hi it's Sam from Australia, I have a question how can I get cheap bumper for jeep G, Cherokee 2014? coz parts are very expensive in Australia
Trying to identify the black vents at the end after he took off the bumper. That fell off my vehicle, anyone have any idea?
This guy sounds like kermit the frog
😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
Not bad, but fairly rookie. First, this is a bumper cover being removed, not a bumper. You do not need to remove the bottom plastic grill covers at all and this is not part of the MB WIS instructions... and the way they are removed in this video is a good way to break them. They should NEVER ever be pried off. To remove them properly, you do it by releasing the top clips from the INSIDE of the bumper cover. You can access the two lower bumper cover bolts from under the car without removing that cover. You should also remove the wiring harness from the fog lamps, side marker lamps and temperature sensor BEFORE pulling the bumper cover, unless you want to tear the wires loose from the connectors and damage the wire seals.If you removed the harness first, this is easily a one man job.
Scott, Did you contribute a Video performing this same job ? are you aware of the part name and Part number for joining the fender to the bumper ?
@@kaufmankdk No, I did not do a video. I’m not sure a video could be taken, as there are two screws the in a blind spot. The WIS from Mercedes describes it best.
WIS ? Do you have access to this.?
@@kaufmankdk Yes. It’s the “work instructions” provide by Mercedes to do any job on their vehicles. It can be purchased off eBay. They call them shop manuals.
So, Scott has nothing of value to contribute. Not part of a solution but only part of the problem.
Thank you so much for your time.
Please consider in the future to be positive and supportive or simply stay out of the form.
You have w211 used bumper...????
Thanks so much!
I have a 2004 e320 dash lights come on for a second then they turn off and nothing works the gages don't work turn signal don't work ac don't work windows don't work "car does start but you have to open and close switch more than once over and over but no dash lights or gages?
It's your 🔑. Buy a replacement body for the 🔑. If the ir leds don't line up just right you'll have those problems. Usually the key body gets worn down and causes the optical communication to fail.
Super Video
Thank you!!!
Okay, let's go. Who got here from watching STEEL BUDDIES Season 10 Episode 8? :D
Перфектно ❤
جميل🌹
Anyone else stuck without a tow truck
고마워요 브로
Thanks
Nice!
That bumper looks like a PAIN ITA!!!
This guy sounds like he has a bearing knock.
oke :DDDD
Very good! Thank you.
👍👍👍My smartphone smashed on the floor and started typing strange things😱, i couldn't stop while watching. Sorry...
Total: 39
...
I highly suggest that you learn the process from beginning to end before shooting the video. Saying "I forgot" or "I did x wrong" in a video and not editing that part out is an unwise decision.