I don't have a Vespa but I like to do some basic maintenance on my car/scooter and it's always a pleasure to see how a professional mechanic works. Italy
Hello, thanks to your videos. Sorry my english ist not so good, because i came from swiss. Do you have a video about change the start button (switch) an a Vespa GTS 125 Super Sport iget from year 2020. or do i have to remove the steering wheel cover to change the startbutton? thanks you for help
Hi shop, I have a Vespa GTS250ie 2011, now it's ECU has problem, it has high garanti. Now Can I adjust the garanti for lower? or I should change a new ECU throttle body. please adive me. Thanks
Hi, today I go to PADS my vespa and the results are: P1003 - Dirty throttle body - signal too high - ATT P0031 - Oxygen sensor heater Voltage low - S.C. to Gnd, O.C. - ATT P0261 - Low Voltage injector - S.C. to Gnd, O.C. - ATT local mechanic said I have to re,place the Throttle body and the Oxygen sensor. Is it true? Since it's quite expensive
Ciao. Ho un problema che mi affligge da tempo . Il mio Beverly 300 tende ad avere un minimo irregolare, a singhiozzare in marcia ed ad imballarsi fino a spegnersi. Riaccendo e riparte subito per poi ripresentare le stesse anomalie. Da come si manifesta il tutto, sembrerebbe il corpo farfallato sporco. Ho provato a pulirlo con uno spray dal condotto filtro ma invano. Mi consigli di smontarlo e pulirlo accuratamente? Ti ringrazio e scusami per il disturbo. Hello. I have a problem that has been affecting me for some time. My Beverly 300 tends to have an uneven idle, sobbing in gear and packing up until it dies. I turn it back on and it starts again immediately and then re-presents the same anomalies. From how it all manifests itself, it would appear that the throttle body is dirty. I tried to clean it with a spray from the filter duct but in vain. Do you advise me to take it apart and clean it thoroughly? Thank you and sorry for the inconvenience.
Hello mr Robot , I’m following your videos for a while now , and today a problem occurred on my Vespa 300 gts hpe 2020 notte (6000km) that I can't solve ; My vespa was working perfectly well, after a stop I wanted to restart ... impossible, the starter works the engine too but does not engage, it is not powered, no spark at the spark plug even after changing it After a check to the odb tag nothing to report. Something is blocking the ignition I have only the blue key and not the red/violet one Is it a problem of anti-theft key or electronic blocking? Have you already encountered this problem? Do you have an idea ? I from France and you are the only person with videos explaining the breakdowns and mechanics vespa ! Thank’s you 🙏🙏
TPS on may vespa GTS 2018 broke 5600 km 8 months ago factory refused replace the ECU with the excuse l have racing exhaust lolololol but l sed l will bay New l prepay 680 euro 💶 8 months pass no ECU arrive yet what l garbage skouter end what a garbage service
![[LIVE] : ONE ลุมพินี 84 วันนี้!! คู่เอก "ก้องศึก vs เมืองไทย"](http://i.ytimg.com/vi/3kuzsAIDf1c/mqdefault.jpg)
I don't have a Vespa but I like to do some basic maintenance on my car/scooter and it's always a pleasure to see how a professional mechanic works.
Italy
Great vid 👍 from a wet and windy UK.
Great exolanation!
When do we need to replace the ECU?I mean, if there is a hesitation in aceleration?or any other sympton?
good video from the netherlands europe..
Thanks for video Mr. Robot! On my 2007 Piaggio mp3 250ie real dirty I need wash every thing down! Tell one thing my never been changed out back 2006!
Good night I have a Vespa 2009 gts 250cc engine. I turn it on and it chokes and it turns off. Can you help me?
Hi, Thank you for your share the process.
After replacing the Throttle Body that needs to do reseat of TPS.....Is it?
Thanks Robot! Learned a lot.
Hello, thanks to your videos. Sorry my english ist not so good, because i came from swiss. Do you have a video about change the start button (switch) an a Vespa GTS 125 Super Sport iget from year 2020. or do i have to remove the steering wheel cover to change the startbutton? thanks you for help
Needing to replace the spring on the throttle return as think it broke. Is this easy to remove?
I have installed a virgin ECU with a new key lock kit. Now the Vespa does not start and the Motor Engine Light does not disappear. Any tipps for me?
Good information. Thanks Robot!
Glad it was helpful!
Hi shop, I have a Vespa GTS250ie 2011, now it's ECU has problem, it has high garanti. Now Can I adjust the garanti for lower? or I should change a new ECU throttle body. please adive me. Thanks
Tasty. This clip is Designer approved ✅
❤️🛵🤖
Hi, today I go to PADS my vespa and the results are:
P1003 - Dirty throttle body - signal too high - ATT
P0031 - Oxygen sensor heater Voltage low - S.C. to Gnd, O.C. - ATT
P0261 - Low Voltage injector - S.C. to Gnd, O.C. - ATT
local mechanic said I have to re,place the Throttle body and the Oxygen sensor. Is it true? Since it's quite expensive
On my ECU talk about the key I only have red key for it because dealer lost it black push bottom when rental it out!
Hi am looking for vespa throttle lxv 150ie 3v 2016
What about a 2010 50lx? Please respond
Ciao. Ho un problema che mi affligge da tempo . Il mio Beverly 300 tende ad avere un minimo irregolare, a singhiozzare in marcia ed ad imballarsi fino a spegnersi. Riaccendo e riparte subito per poi ripresentare le stesse anomalie. Da come si manifesta il tutto, sembrerebbe il corpo farfallato sporco. Ho provato a pulirlo con uno spray dal condotto filtro ma invano. Mi consigli di smontarlo e pulirlo accuratamente? Ti ringrazio e scusami per il disturbo. Hello. I have a problem that has been affecting me for some time. My Beverly 300 tends to have an uneven idle, sobbing in gear and packing up until it dies. I turn it back on and it starts again immediately and then re-presents the same anomalies. From how it all manifests itself, it would appear that the throttle body is dirty. I tried to clean it with a spray from the filter duct but in vain. Do you advise me to take it apart and clean it thoroughly? Thank you and sorry for the inconvenience.
Please, make a video of how to clean this Throttle body!
Hello mr Robot , I’m following your videos for a while now , and today a problem occurred on my Vespa 300 gts hpe 2020 notte (6000km) that I can't solve ;
My vespa was working perfectly well, after a stop I wanted to restart ... impossible, the starter works the engine too but does not engage, it is not powered, no spark at the spark plug even after changing it
After a check to the odb tag nothing to report. Something is blocking the ignition
I have only the blue key and not the red/violet one
Is it a problem of anti-theft key or electronic blocking? Have you already encountered this problem? Do you have an idea ?
I from France and you are the only person with videos explaining the breakdowns and mechanics vespa ! Thank’s you 🙏🙏
its like no gas coming in?
Hi there, have you been able to fix the problem And of so what was the solution I have the same issue here, really frustrating 😢.
🤙
👍
Very good worker
I have a vespa gts supersport 300 2023 I need her fob where can I send the throttle body too you people
TPS on may vespa GTS 2018 broke 5600 km 8 months ago factory refused replace the ECU with the excuse l have racing exhaust lolololol but l sed l will bay New l prepay 680 euro 💶 8 months pass no ECU arrive yet what l garbage skouter end what a garbage service