DIY Epoxy Resin & Wood Cutting Board - Start To Finish Project
ฝัง
- เผยแพร่เมื่อ 9 พ.ย. 2022
- Shop Our Molds And Templates @ CraftedElements.com
-----------------------------------------------------------------------------------------
Ray from It's Maker Rays ( / @itsmakerrays ) does a start to finish charcuterie board / cutting board project using a Crafted Elements silicone mold and router template. Crafted Elements silicone molds are the easiest way to create perfectly shaped epoxy resin and wood projects and are used by beginners and experts alike.
Recommended Product Links & Resources
*********************************************************
Molds: Crafted Elements - craftedelements.com
Router Templates: Crafted Elements - craftedelements.com/collectio...
Router Sled: Crafted Elements - craftedelements.com/routersled
------------------------------------------------------------------------------------------------
Epoxy Resin: @TotalBoat - craftedelements.com/a/totalboat
Makerpoxy (For Pours Under 1/2") - craftedelements.com/a/totalbo...
Thickset (For Pours Under 1.25") - craftedelements.com/a/totalbo...
Thickset Fathom (For Pours Up To 3" & River Tables) - craftedelements.com/a/totalbo...
------------------------------------------------------------------------------------------------
Pigments: Black Diamond - craftedelements.com/a/blackdi...
------------------------------------------------------------------------------------------------
Mold Release Option 1: MG Chemicals 8329 - craftedelements.com/a/mg8329
Mold Release Option 2: Mann Ease Release 200 - craftedelements.com/a/mann200
Bark Removal Knife: Beavercraft Draw Knife - craftedelements.com/a/drawknife
1/4" Flush Trim Bit: Amana 46297 - craftedelements.com/a/amana46297
1/4" Plunge Template Bit: Amana 47224-S - craftedelements.com/a/amana47...
3/8" Plunge Template Bit: Amana 45475-S - craftedelements.com/a/amana45...
1/2" Plunge Template Bit: Amana 45460-S - craftedelements.com/a/amana45...
2.5" Slab Flattening Bit: Spe Tool 2.5" - craftedelements.com/a/spetool...
------------------------------------------------------------------------------------------------ - แนวปฏิบัติและการใช้ชีวิต
I look forward to watching more of your videos
Thanks!
Awesome job 👍
Thank you!
good job
How do you clean your mixing thingy once you’ve mixed the epoxy?
Some let it soak in alcohol, paint thinner or mineral spirits. I just let it dry then peel it off!
I really wished you would've shown the spraying, so we could get a sense of how much to apply.
Does the spray need to dry before putting in the wood/epoxy in the mold?
In some of my build videos I do, Keep it 6-8" away from the mold and just get a good coat. Many people miss the sides, make sure you get them. YES, let it dry 5-10 minutes before putting your wood and epoxy in the mold.
Where does it show you the OZ. After you get the Gallons? I didn’t see that on the calculator. Thanks.
1oz = 0.0078125 gallons, 1 gallon = 128 oz
@@CraftedElements Thanks!
I never saw the end result of this project because The dialogue seem to be in less
Don't give up your day job
This was all over the place. Painful to watch
Thanks for the feedback! Glad you watched it!
Dude if you’re going to represent Crafted Elements. Get your shit together. Make a storyboard and reference it or something.
Thanks for the tip! Appreciate your support.
good project, but, too much talking, quit repeating everything over and over.please
Dude you're all over the place😢