ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
The Corvette wide body build is done!
ฝัง
- เผยแพร่เมื่อ 22 เม.ย. 2023
- The Corvette wide body build is done! Join me in a review of all that went in to the build and the finer details.
As always thank you for watching and clicking those Amazon links to the products in this video.
#c5corvette #widebody #build
JW’s Garage store links on Amazon.
SEM trim black
www.amazon.com/dp/B073T7FQ23/...
Glass safe 0000 steel wool.
www.amazon.com/dp/B074MDTWQR/...
3M VHB double sided tape 3/4” width 45yds.
www.amazon.com/dp/B0016HM7SE/...
Weather proof 80mil sound suppression self adhering sheets.
Siless Black 80 mil (2mm) 36 sqft... www.amazon.com/dp/B07CG2YPRJ?...
ac Delco Rotors 355MM C6Z06 rotors
amzn.to/3ZUYkv1
Steel M14 washers assortment for spacing calipers.=.
amzn.to/3Wr9sNg
Powerstop Stainless brake lines front / rear
amzn.to/3kr2EBH
Cadillac Calipers.
the ATS-V Calipers I found plenty of online at eBay Motors but I was able to get these through
a GM retailer new condition at an equivalent price of what I found used.
Sika Flex 221 black. it has a very short shelf life so only purchase when you need it.
amzn.to/3n1wwGI
K&N Air cleaner.
amzn.to/41Jh40y
Stubby Antenna
amzn.to/41P9XDN
Power steering pressure line.
amzn.to/3Logj7B
Door sill protectors.
amzn.to/3N43HnD
fender flare mounting bolts
amzn.to/3UXVbIJ
Black C7 Badges.
amzn.to/3L3A7f8
rear brake rotors, ceramic pads and clips.
amzn.to/3AnHKIt
Vette Lights front bumper corner lamps, signals, marker LED
amzn.to/41RkwpR
Bro! This thing is beautiful! Very well done.
Thank you 🙏
Good looking car. Impressive attention to detail. Reminds me to go fire-up my C5 since she's been sitting neglected for too long!😬
Thank you very much! Go drive that corvette bud.
I wish I could run a front splitter but car is to low and I have a steep driveway
Same here.
Congrats you did an awesome job my Brother! 👍🏿
Thank you Quinton. 🙏
Looks nice and great color
You just can’t beat Chevrolet torche red.
What an amazing job! Lucky owner
Thank you 🙏
That’s one of the best looking C5’s I’ve ever seen. Nice work 👍
Thank you 🙏
Came out absolutely perfect Brother! Owner should be pleased as punch!
Thank you 🙏 this cars getting a lot of attention so far.
Wow Sir!! Absolutely gorgeous and unique. Surprised there aren't more clean widebody C5 builds. They have beautiful body lines. Very tasteful build👏👏
Thank you very much, I greatly appreciate the comments. 🙏
Car looks amazing!!! Very nice job. Tastefully done.
Thank you 🙏 much appreciated.
came together nicely, looks good.
I knew you would like it.
You killed it with this car!
I appreciate the comment thank you very much.
Damn that looks great. I've been looking at buying a C5 and think I just may pull the trigger.
It did turn out nice thank you, Stay tuned it’s coming back soon to the channel. Also you won’t be disappointed get a C5 or C6
Great job!!💯💯
Thank you 🙏
I also got that fiberglass mafia kit but I can't stand seeing the mounting screws, so I'm gonna blend it into the body.
That would be cool what will you use for the bonding? Fusor or something like semi rigid auto-mix?
@@JWsGarage I am thinking industrial grade epoxy and then filler to shape it in....
Great looking wide body flares. All the wide aftermarket fenders on the market fit like garbage. I really like the idea of keeping the OEM body panels and using them with the flares. Amazing job and attention to detail.
Agreed the rule is if it was cheap from a body co you will pay through the nose for it at the body shop, These fit like trash as well, They took roughly 100hrs to get correct, even, and flush to the body panels and in one of the videos I even changed the angles so they flow with the body lines.
I’m glad you like their fit and finish thank you 🙏
If you are looking for wide body let me suggest a few reputable aftermarket mfrs.
C7 Carbon WB kit $9,000 kit only.
Calloway Corvette $20-30k
Caravaggio $28,000 installed.
J&D Corvette $4-6k kit.
Pandem Aero $6,000 kit.
@@JWsGarage That C7 Carbon wide body looks so damn good! I am not ready to cut my car though... If I ever crash it and its not totaled that is 100% going on my car.
@CrossWindsPat 🙏.
@@JWsGaragelol you know we drive a C5 right and not a C8? 😅
Nice! That's a c8 emblem. I think the c5 belongs on a c5 however. But it's your car.
Badge swap is definitely a love hate issue isn’t it. 🤣 with a car like this though I personally think it’s a plus.
Looks great , but gotta ask why do the fender flares and not cut the fenders for wheel clearance?
Structure! We were waiting on the wheels to be built now that they are done and on the car we will mark the fenders and only clearance what’s needed retaining as much fender structural integrity.
Traction control is easy fix just takes a soldering gun
Not on this one it’s coming from an accelerometer on the front but we’ll see the car back on the channel soon with that correction and it’s wheels and tires.
@JW's Garage ok I gotta see where that's located
Yea sorry those fender flares are tacky as ×uck.Might as well put some off road tires on that thing.
It’s not for everyone’s taste that’s for sure.
looks great .. where did the rocker extensions come from?
Extreme online store.com
What kind of wheel set up you going with that front Cadillac caliper set up! Really nice build going on btw! !!
2 piece stepped lip.
Nice! I’ll watch the rest of the video when I get home ! I watched a few minutes at work haha
I don't see the links to the products you used. thanks
Yes sir. I’m in the process of moving and haven’t gotten them up just yet. If you check back tomorrow I’ll have them uploaded late this evening.
I like the wide look but not totally the bolt on look🤔. This looks like the frc but not the Z06. My Z06 is black, so the add on flares would blend in and hide the flare edge and screws better. I noticed there is no gasket at the front of the hood to seal the gap and prevent rain water or wash water from running through and getting the air filter wet. That wasn’t a problem with the enclosed factory air filter but can be with an open air filter. Thanks
It’s not much of a drive in the rain car any longer and a little water in a hot engine is a old carbon removal hack! The steam loosen carbon on the valves and pistons rap the throttle a couple times and it blows out the back.
It’s a tough look combining two very different car cultures on a car that’s still very much a purist automobile although it’s slowly changing.
You are also correct in that this particular car is a Manual FRC. I’m curious what you would think of my C5 FRC/Targa/Coupe build on the channel?
@@JWsGarage I’ll check it out
those fender flares look like a dodge nitro's, I imagine thats the reason there isnt a finished presentation... I would never put those on mine 🤮🤮
It’s not for everyone that’s for sure.
That exposed fastener shit don't look right on a Vette ...it's fine for the boy racer/ricer econo boxes 😂
Your opinion has zero value. And there’s a name for that ricer racer look it’s called bozazikou if you knew anything beyond your shit box mustangs and gay fkn mopars you’d maybe know that or something about car culture.
@@JWsGarage don't care what it's called I don't fetishize the customs and cultures of other countries dude ..USA!!!! 🇺🇲
@@JWsGarage why install Japanese car aesthetics to a fucking car as American as a Corvette???? Are you on drugs???? Jesus Christ dude wake the fuck up
@@mariocooldude9092 I take it you don’t know who designed the C5 chassis or who built the LS platform engine design huh? One hint, it wasn’t the USA!