If you can't or don't want mess with the hub nut you can unbolt the 6 bolts from the other side of the drive shaft. The axle hub nut needs a 36mm socket and 24mm nut. If the nut is un poor shape, extremely thigthened or find one is hard in you location, better dont mess with it and undo the other 6 bolts.
about the loose bolts at 6:17 I had some problems with this but what I have found that is that the aluminium housing of the rear bushing is to big/thick and it touches the subframe preventing it from siting in the correct position wich causes problem with tightening the bolts, somtimes it can be so bad it is hard to screw the bolt in
Hello. Never encountered that problem, guess the lower quality parts may do that unfortunately. Evan if you are able to screw it well and torque it, if it does not sits, it will always come loose.
Great video, very informative. I been having that f** noise for the last month and was thinking of replacing the whole front suspension. Now I'll try greasing the upper wishbones bushings and see if it goes away. Thanks 😀
Hey what's the best way to take out the bushings of the upper control arm to lubricate it? I have quality Lemförder spare parts, do you know if they need to be lubricated? I don't want to damage anything while taking the bushings out.
Excellent channel! On my old 147 the pinch bolt, that hold the shock absorber to the fork, was badly seized. Tried cutting it but in the end had to cut the fork and replace. Any tips on how to deal with badly seized screws on these cars? I know the rear long bolt is common to be seized as well. Thank you for awesome content!
Hello. How are you? It has come to my attention that, that is a big problems outside Portugal and some other hotter countrys. The best way to deal with this is to prevent it! Using a lot of anti seize grasses. Like the ceramic one I like. The copper one is no good for aluminium.
@@alfaromeonoproblem They are rubbish. If you are going to use poly bushes on an Alfa, go with super pro. At least they have some R&D and thought in them.
Thank you very much for the info! In Portugal there is no market for that. Most of people here just look at price. Even if they have to replace every year.. then they say the sucks...
Boa tarde Bruno.Muito bom video!! Uma pena já nâo trabalhares para outros ... ando á procuro se descubro alguma informçao que me ajude. tenho um Alfa GT e que faz um ranger na roda da frente do lado esquerdo ,por indicaçao " tua"" pedi ao mecanico para lubificar as ditas borrachas borrachas no braço superior....e nada ...braços novos em cima e em baixo, borrrachas barra estabilizadora nada.ponteiras de direçao idem Aguma ideia?? Obrigado e desculpa o longo testo.
Olá. Sem ouvir o ruído é bem complicado. Mas não acredito em substituir só porque sim. Não sei se sabe, mas tenho os mesmos vídeos também em português.
@@alfaromeonoproblem Muito obrigado pela rapida resposta!! Acho que já vi todos os seus videos ....Portugues ...Ingles ,e naô encontrei nada que se assemelhe.
Thank you😎
Thank you very much for watching my channel
thank you from France alfa 147 jtd
Thank you very much for watching my video! The best for you, from Portugal
If you can't or don't want mess with the hub nut you can unbolt the 6 bolts from the other side of the drive shaft.
The axle hub nut needs a 36mm socket and 24mm nut. If the nut is un poor shape, extremely thigthened or find one is hard in you location, better dont mess with it and undo the other 6 bolts.
Hello. Yes, you can do that. Makes it more difficult to remove certain components, but if works it works
about the loose bolts at 6:17 I had some problems with this but what I have found that is that the aluminium housing of the rear bushing is to big/thick and it touches the subframe preventing it from siting in the correct position wich causes problem with tightening the bolts, somtimes it can be so bad it is hard to screw the bolt in
Hello. Never encountered that problem, guess the lower quality parts may do that unfortunately. Evan if you are able to screw it well and torque it, if it does not sits, it will always come loose.
@@alfaromeonoproblem I can not remember the brand of the lower arms but i think that could be the issue
Great video, very informative. I been having that f** noise for the last month and was thinking of replacing the whole front suspension. Now I'll try greasing the upper wishbones bushings and see if it goes away. Thanks 😀
Hello. Thank you very much! Normally it disappears for about a year or two of you use quality greases. I also have a video for how to do it
Found video thanks. What type of synthetic grease thanks. Don’t wish to add wrong grease and prematurely wear the rubber bushing itself.
Hello. Lithium grease, graphite grease, silicon maybe will do but it's short lived
Very good video. Very detailed.
Thank you very much! One of my early ones!
Thank you very much .
Please make more videos.
Thank you, I will.
A new video every Sunday! Check out today's video!
Some good tips about the upper bushes. Thanks.
Thank you very much. Have one more video with tips for that!
Upper control arm maintenance:
th-cam.com/video/B9k3VWq02HA/w-d-xo.html
Hey what's the best way to take out the bushings of the upper control arm to lubricate it? I have quality Lemförder spare parts, do you know if they need to be lubricated? I don't want to damage anything while taking the bushings out.
I discovered your video on this subject. Never mind. Thanks!
Thank you very helpfully video!
Thank you very much!
Thank, super explication . 👍👍👍
Thank you very much for watching!
Muchas gracias! Me has ayudado mucho Hombre 🙏✌🏻
Hello. Thank you very much for watching my video! Please share with your friends
Very interesting. Thank you.
Thank you!
Excellent channel! On my old 147 the pinch bolt, that hold the shock absorber to the fork, was badly seized. Tried cutting it but in the end had to cut the fork and replace. Any tips on how to deal with badly seized screws on these cars? I know the rear long bolt is common to be seized as well. Thank you for awesome content!
Hello. How are you? It has come to my attention that, that is a big problems outside Portugal and some other hotter countrys.
The best way to deal with this is to prevent it!
Using a lot of anti seize grasses. Like the ceramic one I like. The copper one is no good for aluminium.
Can I use a silicone paste for upper bushes
Hello. Silicone grease you can. 🙂
Ok thanks.
Link to the synetic greasr?
Try wurgt shops.
You can actually see a chief mechanic at 12:06 passing by checking everythin is OK
I love my cats, they are always with me wen recording. Thank you very much for watching.
@@alfaromeonoproblem What do you think about power flex bushings? They are polyurethane
I try to avoid it. They give a bad feal and degrade too. For me, no good.
@@alfaromeonoproblem They are rubbish. If you are going to use poly bushes on an Alfa, go with super pro. At least they have some R&D and thought in them.
Thank you very much for the info! In Portugal there is no market for that. Most of people here just look at price. Even if they have to replace every year.. then they say the sucks...
Boa tarde Bruno.Muito bom video!! Uma pena já nâo trabalhares para outros ... ando á procuro se descubro alguma informçao que me ajude. tenho um Alfa GT e que faz um ranger na roda da frente do lado esquerdo ,por indicaçao " tua"" pedi ao mecanico para lubificar as ditas borrachas borrachas no braço superior....e nada ...braços novos em cima e em baixo, borrrachas barra estabilizadora nada.ponteiras de direçao idem Aguma ideia?? Obrigado e desculpa o longo testo.
Olá. Sem ouvir o ruído é bem complicado. Mas não acredito em substituir só porque sim.
Não sei se sabe, mas tenho os mesmos vídeos também em português.
@@alfaromeonoproblem Muito obrigado pela rapida resposta!! Acho que já vi todos os seus videos ....Portugues ...Ingles ,e naô encontrei nada que se assemelhe.
Envie-me o ruído para o mail. Está na descrição abaixo
@@alfaromeonoproblem Peço desculpa pela ignorancia,mas nao consigo encontrar o link do email
alfaromeonoproblem@gmail.com
9:36 hahaha
hello, thank you for watching