CHECK OUT THE TATTOO KIT HERE (UPDATED LINKS) Mast Tattoo Machine Special Edition Kit dragonhawkofficial.com/all-products/permanent-makeup-machines/pmu-kits/tattoo-kit-mast-tattoo-machine-rotary-pen-advanced-bundle/?ref=3cqB0cjX Dragonhawk Official Website dragonhawkofficial.com/?ref=3cqB0cjX 10% Off Coupon Code danielyuck10 The Tattoo Journal By Daniel Yuck amzn.to/43NW3CX You can download the list of gear I use or have used right here danielyuck.com/daniel-yuck-tattoo-gear/ Check out my website for tattoo articles, blogs, tattoo gear, tattoo stencils and more! danielyuck.com/
I have this machine and here's my critique of it. It is best used for smaller needle grouping rl1-rl5 for lining. Great for soft shading. DO NOT RUN HIGHER THAN 8 VOLTS!!! You will burn out the motor. It's soft hitting.
My wife has the same machine. Looks like everyone agrees that it is best for regular use. Small needle count. Keep it at 8 or below. You can really feel it get over worked above 8.
YES! I geeked when I saw this! Thank you for going over this machine and even got the preferred It's so compact and the needles seem to do really well. Also appreciate all of the knowledgeable comments and look forward to more videos!!!!! I've been torn between this and cnc also.
I'm glad to see you review this setup I have been looking at this machine with the wireless setup and wasn't sure if it was a good machine or not thank you for the video excited to see you do a full tattoo with it thanks again for all your videos
@@Dropsen1 I don't have much time these days, as i have been working the graveyard shift at a mill, but I have gotten to use it on a few spots, and even touched up one of my old stick and poke. What a great deal! It looks great and is super easy to use, wish it came with some test skin to practice on, but for the price this was a treat.
I have this one I use it everyday, anything around a 7RL or up it has trouble with . And high voltage will kill it. Nice for small stuff. Looking to go up on the next machine . Hope for a bishop Wand but I have to wait a bit.
I guess I burned mine out. Had it less than 3 months!! Emailed company and was responded to quickly with a message saying to send a video I will fix for you” I guess we will see!
Just starting out with skins that big is awesome. I would suggest just putting a bunch of stencils on one letting it sit for awhile and then just start doing them the next day when the stencils are set. I know it's hard to wait but you can put a bunch of small/medium sized stencils on that and get a few hours of practice. I messed up when I first started because I didn't wait long enough to let the stencils set and I ended up rubbing them off and just messing up the design. But I was going to get that kit but I ended up going with some coil machines because thats what I wanted to learn on. I'm glad I did because I lobe coil machines for some reason and I've always wanted to learn with them.
ihas used coil gun 7 year and has 100-700$ guns and i buy first pen gun i fight all my coil gun to trash and used only pen gun last 3 year now. totally goil gun have big shit than pen gun.
I like to bag first double the folded paper towel for a fatter grip as to use less cohesive tape and use the mast wireless battery as well as the power supply
I got one with 2 batteries I’ve used it for over a year that sob is a work horse I’ve worked it 12 hours straight done several sleeves I’ve lined 14 rl n used 23 mags shades like butter lol I’d buy another I will say I have dropped it a few times it just now starting to make a rattle sound just for a second every now and then but I love it
Just bought the CNC we plus 😭 and after seeing your review, I want to send it back :/ was also considering buying the ava ep10, I just dont have the money like that right now
I will say that you have described this unboxing a very well and makes me want to get one thank you I'm old-school call machine top guy and I would like to try the pain Machining this is what I'm going to go for thank you
I have not reviewed that machine just yet. I maybe able to make that happen in the near future here. Bare with me and I will do my best to get this done.
Hey, just wanted to see if anyone has any answers. When I turn my pen on, it works but when I put the needle on, it seems to stop vibrating and the needle does not go up and down. What do you think could be the problem?
Question, is the needle vibrating or does it go in and out mine looks like it’s vibrating and I bought two they both look like vibrating not sure if they r considered garbage or what please help
Looking to buy my first machine. More than likely will buy this one, but I was curious about the wireless version of this. Anyone have any thoughts on it?
Just my opinion, but for your 1st tattoo machine look at the CNC Machines. CNC makes a really good solid machines at reasonable prices. Also, they have been improving their machines since they started. FYI I was torn between the mast and the CNC Q3 and I chose the Q3 as my 1at tattoo machine. I love it and am very glad that I bought it. Best of luck with what ever machine that you decide on.
I'm a beginner tattoo artist and I'm using this wireless machine. I am really happy with it but like the other comments say. Keep it at 8 or below so it doesn't overheat. All in all I am really happy with it, for it being my first tattoo pen
Excellent machine if used what it was designed for low voltage for semi permanent make up lip lines eye brows ect as a pro artist not very good for studio tattoo machine simply wouldn't handle constant use
Thank you very much Hiits! I appreciate you, your time and support! Don't hesitate to let me know if you have any questions, I will assist you in the best possible direction.
Then again... Who knows. Maybe some distortion, echo, or reverb in a tattoo might look pretty cool 😂 There's a big trend of artists experimenting with fx pedals on different instruments like the harp... I've even seen a painter use them to control power to his airbrush. Making all kinds of wacky spray patterns and such. #DanielYuck 😉😆
I've used this maschine for lining, packing, shading and honestly i wouldnt recomend it. Any design bigger than the size of your palm will take a toll on this maschine. Also it tends to overheat after ~2 hours of use and its not very consistent. Btw 8 volts (the max volt recommended) is not very powerful, so bigger cartriges, 11RL or above, will be a challenge. Now as a back up maschine or for some lighter work (micro tattoos) it makes a lot more sense.
@@paulsichone799 I have this machine and I don't ever run it higher than 7.5 and use nothing over a 5 rl for lining and 9mag for shading. It hits to soft for real solid color packing. It can do as demonstrated but it will burn out if used outside the configurations I listed.
CHECK OUT THE TATTOO KIT HERE (UPDATED LINKS)
Mast Tattoo Machine Special Edition Kit
dragonhawkofficial.com/all-products/permanent-makeup-machines/pmu-kits/tattoo-kit-mast-tattoo-machine-rotary-pen-advanced-bundle/?ref=3cqB0cjX
Dragonhawk Official Website
dragonhawkofficial.com/?ref=3cqB0cjX
10% Off Coupon Code
danielyuck10
The Tattoo Journal By Daniel Yuck
amzn.to/43NW3CX
You can download the list of gear I use or have used right here
danielyuck.com/daniel-yuck-tattoo-gear/
Check out my website for tattoo articles, blogs, tattoo gear, tattoo stencils and more!
danielyuck.com/
I have this machine and here's my critique of it. It is best used for smaller needle grouping rl1-rl5 for lining. Great for soft shading. DO NOT RUN HIGHER THAN 8 VOLTS!!! You will burn out the motor. It's soft hitting.
100% agree with you on everthing you said. I have one as well.
How long do you think it would last before it burns out ? Saying if you use it under 8 volts.
@@Fooliedafinnesser I guess that would depend on the frequency of use. Can't say honestly
I just ordered mine, love to sketch and really good at outlining. Love to do this as a hobby, any tips for self tattooing?
@@midwesternmann6290 Hey man 1 month later any updates on you tattooing yourself ?
My wife has the same machine. Looks like everyone agrees that it is best for regular use. Small needle count. Keep it at 8 or below. You can really feel it get over worked above 8.
this review has been SO useful as a newbie that doesnt understand a lot the step by step was really nice
YES! I geeked when I saw this! Thank you for going over this machine and even got the preferred It's so compact and the needles seem to do really well. Also appreciate all of the knowledgeable comments and look forward to more videos!!!!! I've been torn between this and cnc also.
I'm glad to see you review this setup I have been looking at this machine with the wireless setup and wasn't sure if it was a good machine or not thank you for the video excited to see you do a full tattoo with it thanks again for all your videos
Just got into tattooing and this is the kit I bought. Wish me luck
Let me know how it goes, in my Cart I have the CNC Q2 and seeing at other pens, so lmk if it’s good brother
@@benandpheobe8916 It just arrived in the states but will lyk. I must stress this though, I am insanely new
@@benandpheobe8916 cncq2 was my first machine, i still use it to this day. its great
@@spiltradiationgam3r319 what can you say 8 months later about this machine?
@@Dropsen1 I don't have much time these days, as i have been working the graveyard shift at a mill, but I have gotten to use it on a few spots, and even touched up one of my old stick and poke. What a great deal! It looks great and is super easy to use, wish it came with some test skin to practice on, but for the price this was a treat.
I have this one I use it everyday, anything around a 7RL or up it has trouble with . And high voltage will kill it. Nice for small stuff. Looking to go up on the next machine . Hope for a bishop Wand but I have to wait a bit.
I guess I burned mine out. Had it less than 3 months!! Emailed company and was responded to quickly with a message saying to send a video I will fix for you” I guess we will see!
@@CandyCoveredYou did they?
@@CandyCoveredYou they fix it?
@@brunosinga they sent me a new one
This is my favorite tattoo gun because it’s not about the machine it’s about the skill
Just starting out with skins that big is awesome. I would suggest just putting a bunch of stencils on one letting it sit for awhile and then just start doing them the next day when the stencils are set. I know it's hard to wait but you can put a bunch of small/medium sized stencils on that and get a few hours of practice. I messed up when I first started because I didn't wait long enough to let the stencils set and I ended up rubbing them off and just messing up the design. But I was going to get that kit but I ended up going with some coil machines because thats what I wanted to learn on. I'm glad I did because I lobe coil machines for some reason and I've always wanted to learn with them.
ihas used coil gun 7 year and has 100-700$ guns and i buy first pen gun i fight all my coil gun to trash and used only pen gun last 3 year now. totally goil gun have big shit than pen gun.
Loving your tutorials they are helping tremendously!!!!!!
Thank you very much for your support and feedback!
I appreciate you.
Don't hesitate to drop a comment should you ever have any questions along your way.
Been looking for this machine! Seems like it would be great for stippling. Need to get my hands on one
🚨BLOWING OUT HUMAN SKIN🚨
Blowing Out Human Skin 🩸
th-cam.com/video/GcRSF3ixuAk/w-d-xo.html
I like to bag first double the folded paper towel for a fatter grip as to use less cohesive tape and use the mast wireless battery as well as the power supply
i not understand why use paper this gun, lt better working if not use paper. paper have shit and worst use pen gun.
I got one with 2 batteries I’ve used it for over a year that sob is a work horse I’ve worked it 12 hours straight done several sleeves I’ve lined 14 rl n used 23 mags shades like butter lol I’d buy another I will say I have dropped it a few times it just now starting to make a rattle sound just for a second every now and then but I love it
What model? 🙏🏼
once the machine is completely sealed and wrapped, how do you adjust the needle ? like the amount of needle that comes out of the tube ?
Maybe a little late but I use the Dragonhawk Atom. One trick I learned is to tape/wrap the grip separately from the rest of the tattoo pen.
can you make video cleaning that machine. i need to know how to dissassemble the machine.. thanks
Thanks so much for this vid! I just got mine today can't wait to test it out :)
That’s awesome!! Im excited for you! Enjoy the process🤝
did it hold up?
how long did it take for you to get your machine after you placed the order?
Just bought the CNC we plus 😭 and after seeing your review, I want to send it back :/ was also considering buying the ava ep10, I just dont have the money like that right now
Lots of PMU artists love this machine for a first machine. My question is are the wireless batteries they have interchangeable with this machine?
ANY RCA battery will work with this machine
Is this the mast tour?
I didn’t see the kit online, are u able to send it through here ?
What set do you recommend? I got 200 dollars? Thanks
how can i adjust the needle while tattooing? the plastic gets in the way
hi!
can I use any kind of cartrige with this?
I will say that you have described this unboxing a very well and makes me want to get one thank you I'm old-school call machine top guy and I would like to try the pain Machining this is what I'm going to go for thank you
That is a slick color I like that
I have a question how long did this ship? I just ordered a coil machine kit
What cartridges brand goes best with this?
I’m trying to figure this same thing out
Mast pro cartridges
kwadron
@@moetha1mexikan322 the mast tour pro needles fit the regular mast tour?
CNC
how yo wrap this you can not change the needle depth!!
Is it supposed to have vaseline or some kind of oil in it when you get it?
Hi,does anybody know if for this machine I can use ifferent cartriges? Or just oroginal brand?…thank you for help
Any universal cartridge will fit. Doesn’t have to be Mast Pro brand. I have one and use all different brands of cartridges.
can it be used with wireless power supply ?
Bro if You could make a Review on the mast flip I Will thank you a lot
Still rocking cnc but I’ll give yea a like bro! Can’t wait for the 6th!!
Have you reviewed the MAST Archer before? I’m sure I saw you do it once 🤔 looking for a good review of the 4.2 version 🙏
I have not reviewed that machine just yet. I maybe able to make that happen in the near future here. Bare with me and I will do my best to get this done.
@@DanielYuckwhat do you do with all your machines toss me one😂
Hey, just wanted to see if anyone has any answers. When I turn my pen on, it works but when I put the needle on, it seems to stop vibrating and the needle does not go up and down. What do you think could be the problem?
11RM = 11 round magnum, right?
easy can change wheel ?
Super big thanks for doing such a detailed video! Im looking to upgrade my machine for my PMU services. So thank you!
What kind of skin is this?
Question, is the needle vibrating or does it go in and out mine looks like it’s vibrating and I bought two they both look like vibrating not sure if they r considered garbage or what please help
In and out but it does it that fast it will appear to just vibrate, if its this model pen or the wireless its a decent enough liner/soft shader
Great review man
How long did the shipping process take ?
i order mine on amazon it took 2-3 days.
@@lostfiles5517 ones on Amazon are fake I hear
Does it come with ink? If not, what kind do you use?
The kit I ordered came with ink but it's probably not the best I suggest mom's ink if you're just starting out it's super cheap on amazon
Go with dynamic - black (regular)
Awesome video! I’m just starting and I just ordered this machine! I was wondering what ink your using?
Allegory, its in the description box
Hello. Is dragon hawk mast good for beginners? I want to learn dotwork on fake skin or could you recommen something else?
Pretty sure I’m a little late but the Dragonhawk Atom is a pretty good tattoo pen to try out as well
What kind of fake skin do you use?
Do you have an Amazon Link for it maybe?
Looking to buy my first machine. More than likely will buy this one, but I was curious about the wireless version of this. Anyone have any thoughts on it?
Just my opinion, but for your 1st tattoo machine look at the CNC Machines. CNC makes a really good solid machines at reasonable prices. Also, they have been improving their machines since they started. FYI I was torn between the mast and the CNC Q3 and I chose the Q3 as my 1at tattoo machine. I love it and am very glad that I bought it. Best of luck with what ever machine that you decide on.
@@poppylovestattooing-u8m thank you very much! Appreciate you.
I'm a beginner tattoo artist and I'm using this wireless machine. I am really happy with it but like the other comments say. Keep it at 8 or below so it doesn't overheat. All in all I am really happy with it, for it being my first tattoo pen
Excellent machine if used what it was designed for low voltage for semi permanent make up lip lines eye brows ect as a pro artist not very good for studio tattoo machine simply wouldn't handle constant use
@@tamiewilliams3035 exactly the comment i was looking for 💕
do we only use one needle per time? like we are not supposed to reuse it right
Single use only. Please never reuse needles
Unless used on practice skin even out of date can be used on fake skin NEVER REAL HUMANS
I wish I got pens in my kit!
Bonjour
Est-ce que c’est une machine du type liner ou plutôt shader ? Longue ou courte course?
great review
Thank you very much Hiits!
I appreciate you, your time and support!
Don't hesitate to let me know if you have any questions, I will assist you in the best possible direction.
Has anyone used this a pmu machine ??
With the connectors they used for the pedal you could probably use a guitar foot pedal. 😂
(Just an on/off switch... no special effects pedals. 😂 )
I never looked at it that way but now that I think about you may be right! haha Good eye.
Then again... Who knows. Maybe some distortion, echo, or reverb in a tattoo might look pretty cool 😂
There's a big trend of artists experimenting with fx pedals on different instruments like the harp... I've even seen a painter use them to control power to his airbrush. Making all kinds of wacky spray patterns and such.
#DanielYuck 😉😆
احصل عليه ازاى انا من مصر
I've used this maschine for lining, packing, shading and honestly i wouldnt recomend it.
Any design bigger than the size of your palm will take a toll on this maschine.
Also it tends to overheat after ~2 hours of use and its not very consistent.
Btw 8 volts (the max volt recommended) is not very powerful, so bigger cartriges, 11RL or above, will be a challenge.
Now as a back up maschine or for some lighter work (micro tattoos) it makes a lot more sense.
They’re really good for cosmetic tattooing like brows and lips, I got one for cosmetic tattooing
What would you recommend “beginners “
It's meant for small things
I’ve used mine on a regular and it’s really good maybe if you worked on your skills you will see results
It depends on the style of work one wants to do and how they want their workflow to go I feel.
I've had a bad experience with this machine broke after 2 months
Curious, what voltage did you use?
@@twistedink361 8 volts
@@paulsichone799 I have this machine and I don't ever run it higher than 7.5 and use nothing over a 5 rl for lining and 9mag for shading. It hits to soft for real solid color packing. It can do as demonstrated but it will burn out if used outside the configurations I listed.
No recomiendo esta máquina. Yo tenía una Mast y me duró 2 meses. Luego dejó de funcionar. Es porquería china de imitación
Good 👍
The only liner that is not Halo is going to be a single needle
the deeper the tat the better
Pro la info bro
Im your fan from Philippines can you give me some because I want to be a tattoo artist like you thank you
Can u give me that one
That's too loud no good
Chode
Great review man