They told me I needed a master with a 1 inch bore a stock ac delco is 9. Something anyway I bought a wilwood never installed it My 45.00 ac delco works great . Glad your on the right track. for me I got a new booster and it solved my issue.💪
I think I commented on your IG about the pushrod, had the same issue when I went to a wilwood master cylinder. If you have a machine shop near by you can get the pushrod turned down I just ground mines.
![[ ออกกอง ] วัยหนุ่ม 2544 โลกหลังลูกกรง..ทัวร์กองถ่ายหนังใน "คุกของจริง" | JUSTดูIT.](http://i.ytimg.com/vi/vB--aOkZCpw/mqdefault.jpg)
They told me I needed a master with a 1 inch bore a stock ac delco is 9. Something anyway I bought a wilwood never installed it My 45.00 ac delco works great . Glad your on the right track. for me I got a new booster and it solved my issue.💪
The proportion valve sensor needs to come out there’s a tool you screw in it’s place to let you bleed threw it the switch shuts the flow off
Yeah I have it. Thanks for the heads up.
Thank you for the update
Did my whole brake system on my 71 Grand Prix I got everything from them.
Nice update fam!!! 💪🏾💪🏾
Thanks for the update bro!!!
Nice update homie and good idea to change the proportioning valve 👍
Good job brother! Keep it up until you figure it out. I dont think ive ever had a project where i didnt get stuck at some point 😅
I think I commented on your IG about the pushrod, had the same issue when I went to a wilwood master cylinder. If you have a machine shop near by you can get the pushrod turned down I just ground mines.
I’m definitely going to have to do that. I gotta be able to use the Wilwood one
👍🏾✊🏾
Did u ever show the ebrake setup? Dont leave us hanging brother you doing great
Not yet. I’m working on painting the car right now.
@@PENNYLS1 get a wire Swage my brother easy as pie🥧
@@TinnonFamilyFarm yeah I have that. I showed it in another video. Just haven’t put the system together yet.
Good shit
Have you tried bleeding the brakes the ol school way
No but I will have to with the stock master cylinder.
@@PENNYLS1 I would try that before replacing all the lines your brakes were working before so the lines are probably good
@@willierebuildz9182 I had the cut the long line to get the soft axel drop line off. It was rusted solid.