Project SS Custom Painted Cold Air Intake (LS SWAPPED GBODY)

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 ธ.ค. 2024

ความคิดเห็น • 22

  • @nationnation6430
    @nationnation6430 3 ปีที่แล้ว +1

    Good job

  • @eduardopena489
    @eduardopena489 3 ปีที่แล้ว

    🔥🔥🔥

  • @livestreaming7295
    @livestreaming7295 ปีที่แล้ว

    Did you use a high temp paint for air intake or no need to do that?

    • @PENNYLS1
      @PENNYLS1  ปีที่แล้ว

      I just used a single stage paint that has a hardener. It should be fine. Use a 2k paint it’s holding up pretty good.

    • @livestreaming7295
      @livestreaming7295 ปีที่แล้ว

      @@PENNYLS1 how about a 1k clear coat? Is it enough?

  • @jorgemontoya1490
    @jorgemontoya1490 3 ปีที่แล้ว

    What radiator and radiator cover are you using

    • @PENNYLS1
      @PENNYLS1  3 ปีที่แล้ว

      The radiator is from Griffin Radiators part# GRI-CU-70010-LS. I got it from Summit. The cover you can get from GBodyparts.com

    • @jorgemontoya1490
      @jorgemontoya1490 3 ปีที่แล้ว

      @@PENNYLS1 thanks for the info on radiator have another question to ask what I got the radiator already what upper hose did you use and I’m about to wire up my care need help identifying wires on driver firewall Side 2 red are power purple starter pink ? Green?greenwhite? Brown oil black? Tan? If you could help out thanks

    • @PENNYLS1
      @PENNYLS1  3 ปีที่แล้ว

      @@jorgemontoya1490 Both my upper and lower radiator hoses are stock 2002 Camaro SS hoses.

    • @PENNYLS1
      @PENNYLS1  3 ปีที่แล้ว

      @@jorgemontoya1490 pink should be the fuel pump, solid green is coolant temp and brown is oil pressure.

    • @PENNYLS1
      @PENNYLS1  3 ปีที่แล้ว

      @@jorgemontoya1490 Check this video out. th-cam.com/video/djjfmL1v2Bw/w-d-xo.html

  • @ddstaton211
    @ddstaton211 3 ปีที่แล้ว +1

    What was that in the blue bucket you were using?

    • @PENNYLS1
      @PENNYLS1  3 ปีที่แล้ว +1

      Dawn dish detergent. Helps with the wet sanding.

    • @ddstaton211
      @ddstaton211 3 ปีที่แล้ว

      @@PENNYLS1 ok thanks

  • @itsbuddy3487
    @itsbuddy3487 3 ปีที่แล้ว +1

    Where can I get the paint

    • @PENNYLS1
      @PENNYLS1  3 ปีที่แล้ว

      www.paintscratch.com/

  • @luisgonzalez1653
    @luisgonzalez1653 3 ปีที่แล้ว

    Will this fit my 64 impala ?I also have a ls1 5.7 with the holley efi.

    • @PENNYLS1
      @PENNYLS1  3 ปีที่แล้ว

      Honestly I’m not sure. This was custom made for this vehicle. It would depend on your batter location and how your radiator hoses are ran. Wouldn’t want to steer you in the wrong direction.

    • @luisgonzalez1653
      @luisgonzalez1653 3 ปีที่แล้ว

      @@PENNYLS1 Makes sense. My battery and hoses are on the passenger side. I wanted to route it like u did thru the driver side just like you have it. That's exactly how I want mine