@@EmoEmu with screws, and bits for me the whole thing is 169, I even have a 3d printer, but I'd pay 200$ for everything included. maybe some microfiber gloves and a roll of suitable tape.
@G0ldmoon Exactly. I don't have a 3d printer, and the effort of having to get someone to make the box and then assemble it all would exceed just paying more for a completed product.
They did increase the price from 120 to 150 when they came in stock a couple of weeks ago. I got one (at 150) but unfortunately it still didn't come with a piece.
If interested I'm printing one now, I have black, hmu. Can probably send one for about $15 they take about 12hours but I'm trying to tune it to be faster.
For the price, this should definitely be more flushed out and not as janky. A simple plastic enclosure going the full length of the screen would be super cheap to outsource. Basically the 3d printed "upper" you already have? Just extend it all the way to the base to include the plastic spacer you had to tape on, and another two holes for the bottom screws, slimline profile down the entire length of the back so the ribbon cable is held inside. Would just like like a smooth black surface from the sides. Hell you could probably run an ARGB stripe down the back that runs off the same control board and power source for bias lighting synced with whatever is on-screen.
i agree, it looks like a beta product, because consumers needs to find a 3d printer to print the enclosure and also use TAPE to keep things secure lol. more like a homemade kind of product at this stage.
Hyte REALLY needs to refine this to be an all-inclusive product. Having a mount included with the control box, SATA (or something else) instead of Molex etc so there's less DIY required and more plug-and-play. I would definitely be a customer of the V2 version with the required adjustments.
my asus tuf 4090 fits with more than enough room to breathe. Hogwarts Legacy on Ultra 120hz@4k, LG C2 oled display w/hdr, gsync. No issues. Best case ever made.
Buy a vertical GPU bracket, that way you can shift the GPU back as much as possible to get better airflow. Best one would probably be a EZDIY-Fab’s magnetic bracket with this case so you don’t have to screw anything in and have it exactly where you want it to be.
I love the look of mine; I get a ton of compliments on my LCD screen. I have combined wallpaper engine and AIDA64 for both video and a sensor panel. What a great looking case!
This is very cool, but wouldn't it be easier for you guys just to include these 3D Printed mount brackets with the DIY LCD Panel Screen as it would make it more off a convivence to the customers? Personally I don't know that many people that just randomly have a 3D Printer sitting around at home, so it would be quite difficult for me to find a sleek 3d printed mounting bracket solution like this.
I love that this is available directly from the vendor. I would like to see that molex switched to a SATA power plug instead. Also, could the HDMI cable have a 90 degree end for the GPU instead?
@@familiaferreira5530 I sent a link. I don’t know why TH-cam keeps deleting my comment but the brand is called VSDISPLAY 12.6” 1920x515 LCD display. The reviews should have mostly pictures of people using it with the Hyte y60 case to prove it’s the right one on Amazon.
@@DKTD23 well, I didn’t really wanted to wait since it feels like they never restock their own… and I hate having to use the molex, and other unwanted things like the 3d printed thing. I prefer the Amazon one even though it’s more expensive but so far I had no issues.
Canadian customers are charged twice the price, not saying it's all Hyte's fault but we have to pay the price and customs to get the product in our hands. At this price it would be nice to have everything included like the 3D printed mount but still a very nice product for all Hyte Y60 owners.
I own the Ouro Kronii version of the Hyte Y60 case and after watching the video, it seems like the LCD screen mounts with the corner side panel. Is there anyway to purchase a spare corner side panel since in the Ouro Kronii version, the corner side panel has artwork on it.
where did you plug the other side of the power plug cable for that lcd at? i know the front plug goes to the board within the 3d printed set. It wasn't really shown in the video.
Okay installed it and connected it with the old school cable they said....molux? Now the lcd screen showing rotation of solid colors? It not showing what the video of the lcd is showing like your desktop? Is there a certain settings to be shown there?
Can you pls make a vid on GPU brackets to move the gpu away from the glass on 4080 4090 cards pls. I bought the case but the gpu is to close to the glass.
Wont the gaffa tape heat up the circut board? Is there a place that i can buy the cover from? I really dont want to just have it on the bottom of the case wrapped in gaffa tape.
Any update on when the Nexus software will be available. I am using Aida 64 but I love the idea of running Wallpaper Engine in the background that you cant do in Aida 64.
is there an adapter hyte recommends to convert from molex to sata? i bought one on amazon but the screen doesn't turn on although i guess it could be defective.
I downloaded the Hyte nexus software and cannot figure out how to get any data on my lcd panel like you have here? What am I missing or don't have the option on the software?
Off topic but I noticed the gpu is almost right against the glass. My y60 is coming 8n this week and I have a, strix 4080 that will be the same. How are thermals?
For the price of the kit the mount for the control board should be included! There are other kit's that do the same thing that include the mount for the control board at a lower price!
Just got mine last week. I was extra careful. There was nothing at all to mount it so I literally taped it to the glass at the top and bottom. I got everything installed efficiently with the cables mostly out of site. When I turned it on it was immediately apparent that the screen was cracked. Not having a mount made it really difficult to work with. Unfortunately I don’t have a 3d printer. The mount may have saved this screen. Working with Hyte’s support on this. I love the case and am looking forward to getting this installed, in one piece and with a bracket hopefully.
I have a question. Is Hyte already working on a solution for the big RTX 4000 cards? We need something like an internal bracket so that the card doesn't come too close to the glass.
Not sure a solution even exists for the y-60. The space just isn't there to exhaust properly, no matter what you add. Options are y-40, a small 4070-ti, open the big panel, or MSI Suprim Liquid 4090.
@@Megatherium Im using a 70mm width 4090 and it runs fine (mostly in the 70s celsius). I removed the bottom pannel which helped a little, but this card runs cooler than my 3080 did which had more room in the case
Personally "if possible" I would connect the HDMI to on-board display output supported by the CPU instead of going to the GPU output. I don't know if there is a pro or con but the CPU built in graphics(when available) should be just perfect for something like a display sensor panel.. IMO That's the way I have mine setup..
Hyte should supply two more 3D files. First, a box if you bottom install it. Instead of covering the installer with tape. And second, a file for a back cover instead of tape covering it like it was suggested. Other than that I will be getting this as soon as available again.
Please help. Once I put in the screen. My discord doesn't pop up on my dashboard anymore. It goes straight to my lcd screen panel. Please help me to show up on my dashboard again.
So i put a 7 inch mini LCD screen in my pc because i saw it on youtube, looked really cool. but once i got it installed and plugged into the HDMI windows defaults my desktop to the little screen and i cant use my big monitor...cant figure out how to tell windows that my big monitor is my MAIN monitor and the little 7 inch one is #2 it just refuses to work no matter what i try...anyone know what to do here? the only thing ive been able to do is "duplicate screens" which is useless because i need the 7 inch for displaying cpu/gpu temps ect ect. im 6 hrs of effort into it and nothing seems to work
My lcd keeps flashing colors whenever I shutdown or put my computer into sleep mode someone pls help me out with this other than that it works just fine but I just hate the flashing when put into sleep mode
What a fun company Hyte is turning out to be. I kinda wish the little 3D printable box would be included though. That seems really practical.
Or, you know, even better still: Maybe sell a version where the whole back of the screen is covered up all nicely for people who aren't as crafty.
@@EmoEmu with screws, and bits for me the whole thing is 169, I even have a 3d printer, but I'd pay 200$ for everything included. maybe some microfiber gloves and a roll of suitable tape.
@G0ldmoon Exactly. I don't have a 3d printer, and the effort of having to get someone to make the box and then assemble it all would exceed just paying more for a completed product.
Amazon UK has the screen with a box provided, not sure if Amazon US has them though
@dingapotamuss6213 Amazon US has the same kit with the back mounted box and all the bits. Very easy to install.
I wish the mount was included in the packaging, not everyone has access to a 3d printer 😕
Or at least purchasable
I had a company make mine for like $24. Just google 3d printing companies
They did increase the price from 120 to 150 when they came in stock a couple of weeks ago. I got one (at 150) but unfortunately it still didn't come with a piece.
If interested I'm printing one now, I have black, hmu. Can probably send one for about $15 they take about 12hours but I'm trying to tune it to be faster.
@@scottyknows1566 I might take you up on that offer.
For the price, this should definitely be more flushed out and not as janky. A simple plastic enclosure going the full length of the screen would be super cheap to outsource. Basically the 3d printed "upper" you already have? Just extend it all the way to the base to include the plastic spacer you had to tape on, and another two holes for the bottom screws, slimline profile down the entire length of the back so the ribbon cable is held inside. Would just like like a smooth black surface from the sides. Hell you could probably run an ARGB stripe down the back that runs off the same control board and power source for bias lighting synced with whatever is on-screen.
i agree, it looks like a beta product, because consumers needs to find a 3d printer to print the enclosure and also use TAPE to keep things secure lol. more like a homemade kind of product at this stage.
Hyte REALLY needs to refine this to be an all-inclusive product. Having a mount included with the control box, SATA (or something else) instead of Molex etc so there's less DIY required and more plug-and-play.
I would definitely be a customer of the V2 version with the required adjustments.
And now they have the Y70 - which is this!
This case with the lcd mod is the prettiest case I've ever seen. If it could only fit a 4090 it would be perfect
FE 4090 fits good and thermal is good
my asus tuf 4090 fits with more than enough room to breathe. Hogwarts Legacy on Ultra 120hz@4k, LG C2 oled display w/hdr, gsync. No issues. Best case ever made.
@@DownCasH Did you remove the glass panel ?
@TheXpussyx3 Nope
Buy a vertical GPU bracket, that way you can shift the GPU back as much as possible to get better airflow. Best one would probably be a EZDIY-Fab’s magnetic bracket with this case so you don’t have to screw anything in and have it exactly where you want it to be.
I love the look of mine; I get a ton of compliments on my LCD screen. I have combined wallpaper engine and AIDA64 for both video and a sensor panel. What a great looking case!
How do you make it do a transparent background? I had to do a whole bunch of Rainmeter crap to do so
+1 for knowing how to do what Hyte has done
Aren`t AIDA64 unable to make transparent background? 😬
This is so freaking cool, i was torn between the NZXT H9 and the Y60 but this has 100% made me choose the Y60
Same
Im still stuck rn
@@malditoo If you’re still stuck, chose y60 of h9 because of the design
H9 is way better for airflow tho
Most important part was done behind the scenes.. awesome
To everyone complaining about the 3d printing check if your public library has one you can use. Some do apparently
yeah but for that price, a $0.50 piece of plastic could be included lets be real here
Does this screen utilize the same nexus software as the Y70 screen?
This is very cool, but wouldn't it be easier for you guys just to include these 3D Printed mount brackets with the DIY LCD Panel Screen as it would make it more off a convivence to the customers?
Personally I don't know that many people that just randomly have a 3D Printer sitting around at home, so it would be quite difficult for me to find a sleek 3d printed mounting bracket solution like this.
Love this case. Been thinking about getting the screen.
Expecting customers to just have a 3D printer is pretty crazy. Especially for the price.
I don't understand why you don't include the mount in a kit that costs well over $100
agreed. not all of us have access to a 3d printer
yes please the complete package
Or at the very least an extra 10-$20 for mount kit included
@@2321kenb that would be fine. Just include everything in one place.
HYTE is a good company. Their support is also rock solid.
agreed, had a small scratch on my front panel after peeling off the plastic and they gave me a replacement.
True , best support ever .
I like the white paint of the insides of this case
Really helpful vid thanks!
Anyway I can buy that 3d printed holder from somewhere?
Super helpful video, thank you.
Where can i get a replacement ribbon cable? I am asking for my future self.
Thanks Brad with Hyte! Considering the Y60 now...hmmm
I bought the case just for this lol....to be honest it is such an easy case to build in. Absolutely worth it.
Funny I need this guide but you having the exact same setup makes me laugh 😂
Very very good. But i have to say, i bet you get alot of emails about that data ribbon breaking at those angles 😬
i hope it will have a v2 with a full back cover
There’s a version with the mounts and all on amazon😊
My kit didn't come with the little foot for the bottom of the screen. Is there an STL available to print that?
Same, and the display is too short without the foot so there’s bare glass at the bottom 🫠
Where can I find that set up for the screen?
Can you see the ibuy power etching in the glass at the bottom after the install???
Are you guys going to give the site the ability to wishlist items so we can see when it comes back in stock?
They just did
I love that this is available directly from the vendor. I would like to see that molex switched to a SATA power plug instead. Also, could the HDMI cable have a 90 degree end for the GPU instead?
You have a Amazon link ?
@@familiaferreira5530 I sent a link. I don’t know why TH-cam keeps deleting my comment but the brand is called VSDISPLAY 12.6” 1920x515 LCD display. The reviews should have mostly pictures of people using it with the Hyte y60 case to prove it’s the right one on Amazon.
@@mysticqro950 The problem is that kit costs even more now than the Hyte one, so the value proposition is going away
*WAS* available
@@DKTD23 well, I didn’t really wanted to wait since it feels like they never restock their own… and I hate having to use the molex, and other unwanted things like the 3d printed thing. I prefer the Amazon one even though it’s more expensive but so far I had no issues.
Thanks for the STL
Canadian customers are charged twice the price, not saying it's all Hyte's fault but we have to pay the price and customs to get the product in our hands. At this price it would be nice to have everything included like the 3D printed mount but still a very nice product for all Hyte Y60 owners.
What program do you use
I own the Ouro Kronii version of the Hyte Y60 case and after watching the video, it seems like the LCD screen mounts with the corner side panel. Is there anyway to purchase a spare corner side panel since in the Ouro Kronii version, the corner side panel has artwork on it.
Would this apply to the Y70 case, too?
where did you plug the other side of the power plug cable for that lcd at? i know the front plug goes to the board within the 3d printed set. It wasn't really shown in the video.
Okay installed it and connected it with the old school cable they said....molux? Now the lcd screen showing rotation of solid colors? It not showing what the video of the lcd is showing like your desktop? Is there a certain settings to be shown there?
what was the app for Widgets ??
Can you pls make a vid on GPU brackets to move the gpu away from the glass on 4080 4090 cards pls. I bought the case but the gpu is to close to the glass.
Also where to find the m2.5 screws that would fit for the 3d printed parts?
Is therre an app for systems widgets to display?
Wont the gaffa tape heat up the circut board? Is there a place that i can buy the cover from? I really dont want to just have it on the bottom of the case wrapped in gaffa tape.
how did you print this? the orientation that it's in? going to print this with ABS.
Where can i find 12v plug in to buy? The cable i got was to short.
how can i set it up like you have ? where do i get the apps etc etc ? thanks
Any update on when the Nexus software will be available. I am using Aida 64 but I love the idea of running Wallpaper Engine in the background that you cant do in Aida 64.
The fishbowl of my dreams!!
is there an adapter hyte recommends to convert from molex to sata? i bought one on amazon but the screen doesn't turn on although i guess it could be defective.
ive got the hyte 70 does this screen fit into the hyte 70?
That’s sucks. I have been waiting to doing something like this for my y60. However, item is sold out. Any eta when it’s going to be back in stock:.
Will this work the same way on the hy70 that doesn’t come with a screen? (Buying a hy70 screen separately)
Quando este gabinete chegará aqui no Brasil??????????????????
I downloaded the Hyte nexus software and cannot figure out how to get any data on my lcd panel like you have here? What am I missing or don't have the option on the software?
Can I put this into my Y40 case?
Off topic but I noticed the gpu is almost right against the glass. My y60 is coming 8n this week and I have a, strix 4080 that will be the same. How are thermals?
Whats the name of the cord needed its smaller than the average hdmi for the one i have
Hi, can you reset the skins for this screen?
when is the LCD Screen going to be available on your website again?
on the website of hyte , nexus software was told to be available on 24th of march, now it doesn't give any date, .....
when will the hyte software for the lcd display which was in R&D be released? would like to try it
where is the original screen sourced from so I can get the same thing for way cheaper? I’m guessing $40 on Alibaba somewhere?
Thing's been out of stock a month now just want to mod my case!
Aonde consigo comprar esta tela ???
Great project
I have only one HDMI port that is occupied already. Why not a Display Port?
Does this fit non touch y70?
Did you guys paint the black areas of this case white??
restock when
BIG question: can you plug the screen into the USB C port of the graphics card? I have an RTX 2080 and already have 4 screens
For the price of the kit the mount for the control board should be included! There are other kit's that do the same thing that include the mount for the control board at a lower price!
Just got mine last week. I was extra careful. There was nothing at all to mount it so I literally taped it to the glass at the top and bottom. I got everything installed efficiently with the cables mostly out of site. When I turned it on it was immediately apparent that the screen was cracked. Not having a mount made it really difficult to work with. Unfortunately I don’t have a 3d printer. The mount may have saved this screen. Working with Hyte’s support on this. I love the case and am looking forward to getting this installed, in one piece and with a bracket hopefully.
I just purchased one and was wondering. Is there any reason spray painting the back could be bad in anyway?
Only thing I need is the link to purchase one
How can I get the screen setup that he has in the beginning of the video ?
I have a question. Is Hyte already working on a solution for the big RTX 4000 cards? We need something like an internal bracket so that the card doesn't come too close to the glass.
Not sure a solution even exists for the y-60. The space just isn't there to exhaust properly, no matter what you add. Options are y-40, a small 4070-ti, open the big panel, or MSI Suprim Liquid 4090.
@@Megatherium I saw some wizard managed to horizontally mount the biggest 4090 inside a y60 and it looked fine
@@AubreyOnfroy ah right I see then.
@@Megatherium there are third party solutions, like ezdiy brackets, that seems to work fine and with good temperatures.
@@Megatherium Im using a 70mm width 4090 and it runs fine (mostly in the 70s celsius). I removed the bottom pannel which helped a little, but this card runs cooler than my 3080 did which had more room in the case
Where the graphics card take the air? The cristal is so close...
Im from india how can i purchase this case?
Will this fit in the y70
Link to buy lcd screen ?
Personally "if possible" I would connect the HDMI to on-board display output supported by the CPU instead of going to the GPU output. I don't know if there is a pro or con but the CPU built in graphics(when available) should be just perfect for something like a display sensor panel.. IMO That's the way I have mine setup..
I already have dual monitors can I still add this?
my ribbon broke whats the part to replace it?
IMPORTANT: after push the power button the Screen did not show anything, is it meaning this screen can not be used in bootloading stage?
where i can buy it, i cant find it online in Germany :(
I want to buy this screen but I don't want to mount it on a case. I want to place it vertically on the desktop.
Installed but my GPU has 1 HDMI port and no onboard graphics on 5800X3D no idea how to use this display
Why doesn't anyone show where the display power actually connects to the psu?
It is not included in case?
I'm planning to buy the case can you share a very good power supply?
Hyte should supply two more 3D files. First, a box if you bottom install it. Instead of covering the installer with tape. And second, a file for a back cover instead of tape covering it like it was suggested. Other than that I will be getting this as soon as available again.
Does the lCD come with the case if I buy the case on Amazon ??
Wdym?
@@shatmx7574 Like if I buy the Hyte 60 case on Amazon will the LCD come with it?
@@ArabeMonkey No. It sold separately. Thou you can get the same 12" LCD screen on Amazon but a little more pricy.
@@sabl2250 Thanks it helps a lot 🤗🙏
why your case is white inside? your content is my plan too thanks
What is a good site to get the stl file 3d printed ?
Please help. Once I put in the screen. My discord doesn't pop up on my dashboard anymore. It goes straight to my lcd screen panel. Please help me to show up on my dashboard again.
So i put a 7 inch mini LCD screen in my pc because i saw it on youtube, looked really cool. but once i got it installed and plugged into the HDMI windows defaults my desktop to the little screen and i cant use my big monitor...cant figure out how to tell windows that my big monitor is my MAIN monitor and the little 7 inch one is #2 it just refuses to work no matter what i try...anyone know what to do here? the only thing ive been able to do is "duplicate screens" which is useless because i need the 7 inch for displaying cpu/gpu temps ect ect. im 6 hrs of effort into it and nothing seems to work
What cases are those on the shelf?
Those are our Revolt 3 cases! We made special color ones for our community to enjoy 🙂
@@hytebrand I want a blue one.😁😁😁
Really want the mount but don’t have a 3D printer for this
I agree they should’ve included that
CAN YOU RPOVIDE THE STL LINK AGAIN PLS?
Just got it! Doesn't work though, no display.
My lcd keeps flashing colors whenever I shutdown or put my computer into sleep mode someone pls help me out with this other than that it works just fine but I just hate the flashing when put into sleep mode
for $150 maybe jsut include the shell too? Or atlesst get it back in stock? I’m going to get one from china lol…