CPG Performance Intakes Installation for the N63/N63TU - Check the description for tools required.
ฝัง
- เผยแพร่เมื่อ 9 ม.ค. 2021
- Installation video of the CPG Performance Intakes for the N63/TU Platform.
Tools required:
Ratchet
6mm socket
7mm socket
Long ratchet extension
Note...A long flat head screwdriver can also be used instead of the rachet, sockets and extension.
Link to video for removal of the factory intakes:
• CPG Performance - N63/...
Link to CPG Performance:
www.cpgperformance.com
![[ LIVE ] Rank เล่นแต่แครี่ ยาวๆถึง 100ดาว “วันนี้มีกิจกรรมลุ้นรับสกินมาบอกต่อ โก๋แก่ช็อกโกบอล x ROV”](http://i.ytimg.com/vi/5NNgkhWj57Y/mqdefault.jpg)
Dude made this look so easy like a 5 year old can do it.
First time ive seen a sleeve referred to as a nipple 😅 great video
Lol it’s a southern thing
Thanks CPG and Calvin for this. Wow. People couldn’t be lazier. Im reading thru comments to find valuable info. But all i see is questions asking if it fits this, if it fits that. READ guys, come on. Dude cant be any more clear. Fits 5, 6 and 7 series with n63/n63tu. If you don’t know what engine you have, maybe not a DIY for you... Anyway, use google, wiki, forums, whatever. Every engine ever put into any bmw platform is easily discovered with a VERY quick search. Also, if these instructions aren’t doing it for you-pay someone else. I put this at a 4.5/10 for install. Or as my dude Calvin says-its just like that.
Changing downpipes on these beasts-now thats a challenge.
Ps- intake tubes needed are for x5/x6 with the same motor..... intakes are routed towards front on those vehicles, not towards the rear as with these.
Maybe you need to read more. Looks like it only fits N63 made for 2018 or newer based on round rather than oval intakes to the airboxs on earlier N63 cars (like my ‘14 N63). I guess you don’t know about that huh?
@@MegaJugMan those are the 2014-2018 X5/X6 xDrive50i N63TU (N63B44O1) turbocharger inlet pipes and they bolt directly on to the N63B44O1 in the 5/6/7 series. The part numbers are listed and linked on the web site.
You think we can get a sound check
Wow i could have never imagine how simple it is to remove the grille some people on youtube made it look so difficult
Well it may appear to be difficult but once you remove them a couple of times they become easy and you know how to remove them going forward. But I agree that anytime it's someone's first time doing something it can appear to be much harder then it actually is. They do require a bit of constant pressure to be applied on both sides while pulling. Otherwise it's fairly easy.
Howd you get those inlets to align with the pcv valve? Cut hose? Size diameter on that?
Looks good
Depending where you at if live in are where it rains a lot in no time you
You will hydrolock your engine 👍🏻
Part of your statement is true while majority is incorrect. The truth is... You can hydrolock any car if you decide to drive (submerge) your car in water. However... There's no way shape or form that you'll hydrolock your car by driving in the rain whether it be factory or aftermarket intakes. If this was true... You'd be more worried about your factory setup vs aftermarket since your factory setup contains no filters up front. Also.... It would take a very bad horizontal rain storm to hydrolock while driving. 😂
Is that yellow a custom color or standard production color?
Where do you get the black flex intake tube from? I been searching everywhere 😊
I always have this dumb question and correct me if am wrong..
1.) since your cold air intake filters are in front of the grill , during heavy rain dont you think water and dust will be sucked into the airbox directly cause only one filter is available in front , it might get soak, and filled with dirts.
2.) even though you have cold intakes the MAS job is to measure the amt of air going inside based on the mixture so no matter you have tons of oxygen going inside the mas will measure how much the engine needs and only allow that fuel mixture inside from fuel injection. so it should not make any difference..
so what happens when you drive in the middle of the rain?
Good morning , I have a BMW 550I M year 2011 , can you send me the link of this intake kit plus the air filter so I can buy it ?
Very nice and interested. Any CEL with the MAFs installed? Also, can the brace supports go back on or do they need to be off to make room for the intake pipe?
Thank you. Anytime you make modifications to a car, you should readapt the vehicle. If you properly readapt the car there should be no CEL with the MAFs installed. Otherwise you could get an air mass too high detection. And yes... the brace supports can be reinstalled.
@@cpgperformance1352 Thanks for the reply. This is the BEST version for the cold air intake on these N63 F 10s. You made it 10 times better than the other versions because of the forward facing Turbo inlets. 👍
What kind of front spoiler you have on the car?
Will this fit my 2017 bmw 650i coupe
Hey, I did this modifcation with the new upgraded turbo intake inlets, however my Crank Case breather hose is too short to reach the new inlets. How did you resolve this issue or what length should I buy? Is there different lengths for a 2015 vs 2012 or other years?
I got the same issue also got mass sensor problem too!😏
@@WAPM13did you figure out how to get rid of the cel ?
Where did u buy you turbo inlet tube im having a really hard time trying to find it ?
Part numbers are listed on my website under the intakes. Hope this helps...
Are these in stock still
HI, I understand how the maf sensors go , again my question is will they fit to the setup you have? I would like to see yours connected to know that they will fit into the tube, because the maf sensors are about 3 to 4 inches long and the wires connected to the sensors are short, so again for that kind of money, I would like to see that the sensors fit into the new tubing before I order this setup. Thanks! Robert Adkison
Please check the website as there's pictures with the MAFs installed and wires connected. If you have more questions after that, please feel free to message me via the website. I hope this helps.
Also... if you pop your engine, you'll notice that the wires are closer to the housings on the new intakes vs the existing stock housing as the sensor wiring comes from the wiring harness mounted down by the hpfp. I hope this helps...
I have a 2011 550i n63 will this air intake work? the outlet duct on the site part number says it don’t fit for my car.please help
The turbo inlets will fit your vehicle. It's going to say that they won't fit because they aren't factory to your vehicle. There's many others with N63's that have my purchased the CPG Performance intakes with the turbo inlets. Hope this helps...
Dish soap is the best practice lube for installation guys. Not Vasaline or any grease. Soap will dry up in minute after install. Grease/Vasaline will not and will lead to possible slip in the near/far future.
While there are many ways to lubricate. Vaseline will dry out also without the worries of any slippage. Feel free to try it for yourself. Hence the reason why I make mention to use it sparingly. A little goes a long way. I hope this helps...
This didn't age well
Can you install the Turbo inlet parts yourself? Or would this be needed to be taken to a shop?
Wish you would reply to this question!
I’m converting my 550i from an ARM Motorsport setup to a setup similar to this with those F15 X5 M intake boots.
You can easily do it yourself. Takes one screw and undoing the PCV clamp. FCP Euro sells the inlets for like $56 a side w/ life time warranty.
What filters come with the kit? K&N, BMC etc?
The filters are a custom stainless steel filter. Not paper or cotton. Please visit the website for more information. www.cpgperformance.com
Where I can get from
Hello, do you have to disconnect the battery to install the intake?
No...
Looks very nice, any before and after dyno results available?
Thank you. No before and after Dyno.
Looks awesome can anyone tell how this helps the performance I would like to do it to my car
@@melrosabal3564 it doesn't just for looks
@@melrosabal3564from what I’ve heard better throttle response and sounds great for turbo spools
Hey, try wd40 instead of Vaseline. It stays lubed for about 10 mins, then drys and everything is set and well sealed. Using t bolt clamps on pressurized systems is always a hood idea to.
WD-40 can eat up the silicone. Vaseline is just fine. We use it in engine assembly’s for some parts
The braces are eliminated or can they be placed back on? Also can you get the intakes without the logo or change the color of the logo .
Yes, the braces can be installed after installing the intakes. We have picture of this on our website under the intakes. Yes, you can get the intakes without the CPG logo on them. There's currently no option to change the color of the logo. Hope this helps...
I looked at the website. It doesnt show the stabalizer bars re installed. Do the two front bars fit back on or do they not?
@@cole7984 please take a look at the pictures of the intakes on the website. One of the pictures show the bars installed. I hope this helps...
So when I buy it is it 800 dollars for the whole kit or I have to buy 2 of them ??
It's for the intake kit. Everything you see in the video is included. Please visit our website @ www.cpgperformance.com for more info. Hope this helps.
Do they come stock yellow or do i have to add the color ??
Stock is polished. You can choose a custom color if you'd like for the additional cost. Hope this helps...
How can I get those lights for my 16 550i xdrive
the car in this vid is an m6 not a m5
Sorry but I am a noob to all this but what is the difference between your intake with the maf and without the maf sensors? How does that work? Wont i get a cel?
Without the MAF Sensor is called a mafless setup. And yes... you will get a cel once disconnected but the cel is typically removed via tuning therefore no cel is triggered.
Why would you need to go mafless?
Did u go mafles on the intakes or no?
Yes... My personal vehicle had the Mafless setup.
Can we get a promo code? Please
What are the correct turbo to cpg pieces / hoses to buy to make it work?
Please take a look at our website for more information.
@@cpgperformance1352 your website needs improvement. You should sell a complete package so people don’t get discouraged to buy your products (like myself). You should also improve your videos to include one that shows how to install the turbo to cpg ducts. Hope this helps.
@@secabellsystems5100 our intentions are never to make an installation video on how to install another brands parts. Our video details how to install our intakes. The turbo inlets aren't of ours and are pretty straight forward as far as installation goes. Maybe you should consider taking your vehicle to an experienced mechanic as DIY's aren't for everyone. When our customers reach out with installation questions, we provide them with all of the help necessary. Hope this helps...
what about on a 2013 bmw 550i ? does it work
Yes, there are many customers with N63's running the CPG Performance intakes. Hope this helps.
I noticed that your tubes are facing forward and therefore you didn't need to use a 90 to get it turned forward, but I also noticed how far it put your map sensors towards the front end of the motor. So why didn't you show how you put the sensors back, because it's important in order for the car to idle and run correctly. The sensors that you removed from the original air box intake, is closer to the top of the motor. Can you please make another video showing how you reconnected the sensors. Thanks!
The sensors can only be mounted 1 way in the housings. There's no 2 ways about it. They can only properly go into the maf housing and screw down 1 way. If inserted the other direction, the holes simple don't line up. Hope this helps...
@@cpgperformance1352 That isn’t what he meant. Old thread but he meant it’s farther from the top so how did you get the wire to connect
@@sirmo667 or meaning how did he reach that far down to connect the Maf sensor
@@zanewarren2774 No, it doesn’t reach that far. What’s the point in you commenting if you’re just gonna look dumb? It literally doesn’t go that far! Please help me understand why you would comment
Link for intakes ?
www.cpgperformance.com
Will this intake fit on a 2011 X5
I'm unsure of how the factory stock intakes look in the '11 X5. If you send me a message via the website with pictures, I can better assist in answering that question.
yeh this would be sick on x5 v8 - idk if it fits though?
Bro! You call those “Spigots”… not Nipples 😂 Breaking out your Vaseline for the nipples…. 🤦🏻♂️🤦🏻♂️🤦🏻♂️
Nice but the price is steep?
Please check the website for pricing.
www.cpgperformance.com
Do you recommend driving in the rain with this intake? Reason I ask is because obviously those filters will get soaked and will foul out the maf sensors?
There's a big misconception that people have on driving in the rain with intakes. This intake is no different than the factory intake as far as routing is concerned. Actually... I'd be more concerned about driving in the rain with the factory intakes vs these. That's because the factory plastic routed to the front is open without a filter. However... the truth is... unless you submerge your car in water, you don't have to worry about driving in the rain with these intakes. The filters should sit back in the grill if installed properly. Also the aerodynamics of the car won't allow huge amounts of water to go into the grill area while driving as the water will flow over the hood because of the cars aerodynamics. With all of this said... you only have to worry about issues if you submerge your car in water and that's with any intake whether it's factory or aftermarket. I hope this helps...
Will this work on 2010 750i xdrive?
These intakes should for your 2010 750 xDrive. They are made to fit all N63 & N63TU. If you'd like to be 100% sure...Please send a pic or two of your engine bay to cpgperformance2020@gmail.com so that we can verify. Hope this helps...
Ryan u got IG, I got a 2010 750i, could trade info
Warum machen sie kein Klang video?
I’m no expert but that kit looks bad for flow, a 45 to a 180 and another 90? Might as well leave stock?
Our intakes take the exact same route as your factory setup takes to the front of the grill. The only differences being a straighter path coming off the turbo inlets, very less restrictive and we used hard piping to increase flow dynamics. So... We'd agree with your assessment of not being an expert as your completely wrong in regards to the flow.
Nice job bro… I have a 2021 m8 I’d like to install the same thing is it even possible and if so can you send me some info thanks 🙏🏽
Thank you. We don't offer intakes for the M8 at the moment.
Does this work on a 2009 750li?
Are you N63?
@@cpgperformance1352 yes n63tu 4.4L twin turbo v8
I don't believe that you're 2009 has a N63TU engine. However, these intakes were designed and will fit all 5, 6 and 7 series with the N63/N63TU engines. Hope this helps...
What year M550i do these fit?
These will fit all 5, 6 & 7 series with the N63/N63TU.
@@cpgperformance1352 Man, all these different numbers are confusing. Its easier to go by model year isnt it? Or can say a 2019 model car might have two different engines in it???? I am currently looking at three 2019 M550i's and one 2020 M550i. Are those engine set ups different? I want the one with the forward facing intake system, but is that only on the 2020 model and not on the 2019 model?
@@2ndAmendProtectorWe have confirmed fitment on your vehicle as it's a N63R vs N63/N63TU. However... Your car utilizes different MAFs which requires different MAF housings. Your factory turbo inlets are also different where they connect to the turbos. We need to design different MAF housings and identify forward facing inlets before we release intakes for your vehicle. With that said... We currently don't offer intakes for your vehicle.
@@cpgperformance1352 ....what year and model is the car in the video?
Hi, is this 3" intake?
Hi, Yes this is 3 inch intake. Hope this helps.
Are those m5 turbo mouth pieces my n63 has different mouth pieces
All of the N63/N63TU have different turbo inlets. They must be changed to those in order to utilize the CPG Performance intakes. Hope this helps...
@@cpgperformance1352 what are the correct mouth pieces to buy for your system to work?
@@secabellsystems5100 they are listed on our website.
Hey.calvin
Can.u.sell.me.what.u.put.on.your.nyce
Car...2011.550.xi..180.000.on.motor.2.nd.one...i want.to.keep.her
4.as.long.as.i.can..
I don't quite understand but feel free to send me an email or message me on IG so that I can better assist you.
In germany Not legal :(
No??? Why not?
@@cpgperformance1352 Tuning is a disaster in Germany. Since the suction means more noise, it is not allowed. Everything has to be TÜV-compliant here in Germany.
Awwww I gotcha. I didn't think that there would be a difference between having a set of intakes vs having a supercar like a Lamborghini, McClaren, etc,
Just brake the law 🤷♂️. We do it here all the time...for now at least.