Bronco Power Wheels has FULL POWER! The Fix was SO SIMPLE!
ฝัง
- เผยแพร่เมื่อ 19 พ.ย. 2024
- Our Ford Bronco power wheels go kart build is one of our best performing custom projects- the custom independent front suspension and trailing arm live axle rear suspension works great. Since we installed this Tillotson 228 engine on this go kart, we've had problems with high RPM performance. The idle and throttle response is fine, but at high RPM it sputters. In today's episode, we fix the problem, and the Bronco go kart rips! We gain a ton of power at the top of the power band, and increase our top speed by 10MPH.
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: bit.ly/3T8njaF
----------------Go Power Sports Parts Used in Today’s Video---------------
Tell them CarsandCameras sent you at checkout:
Non-hemi/Tillotson clear valve cover: bit.ly/3gWTAPG
Hemi clear valve cover: bit.ly/3wScbDm
Go Power Sports: bit.ly/3QKyODE
Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirs...
Join the CarsandCameras Pit Crew: / @carsandcameras
Subscribe to our PODCAST channel: / @atthewheelwithcarsand...
NEW MERCH: www.cars-camera...
Equipment we use: www.amazon.com...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.
![เจ็บที่ยังฮัก - ม่อน วรวิทย์ [ Official Mv ] จอนนี่มิวสิค](http://i.ytimg.com/vi/KALIGSRSjFs/mqdefault.jpg)
This thing BOOGIES! Who's excited for the Backyard Unlimited and Dust Bowl 500 races this weekend??
Been waiting for this upload😁
Where arebyou Cars and camperas ñolated in nc
The clear rocker box cover is a really good idea, now when it spits out a pushrod you can see it coming. 🤓
Remember to duck!
OHC engines have pushrods?
@@MegaMeaty OHV not cam
🤣
_"I don't like this place anymore!"_
The snake was probably thinking the same thing.
lol!
that was an eastern kingsnake, they are docile and harmless to people, and they eat other snakes
@@Sausketo was thinking same thing. Black and that long. Also, welcome to having more then an acre of land. With the pond they're lucky they haven't seen water moccasins.
@@rettbull9100 probably because he just hasn’t seen them yet. 100% guaranteed they are there though. Damn cotton mouths
Meanwhile here in Australia i had to step over a python to get in side yesterday, and ran over a redbelly black ( by mistake) and that was a lean week….
Damm
With all that gearing and being AWD, this one rips! Well done guys! Now, build one a little bigger for Ike.
With a 420
Right
With a snow mobile engine
For drilling plastics, acrylics, and such (like that valve cover) a stepped bit is a lifesaver. It leaves a super clean hole and doesn't grab the way a regular bit does.
Awesome content as always guys!!! Have fun and keep the shiny side up, rubber side down!!!
You can buy drill bits specifically for plastics, they typically have steeper angles than those meant for drilling metals.
Im going to have to remember that
I think a future build should be an air cooled VW dune buggy. I think I've seen a few times Isaac having a type one on his property somewhere. Plus you should be able to make it Street legal!
Ike: "It'll probably take 12 pulls to get it going bc of the fuel pump"
*takes 11 pulls* It's almost like he knows what he's doing
Actually it was 12 because nothing first pull then it sputtered then 11 , can he can pick my lotto numbers please
Y’all really gotta do something with the steering on that thing
Right looks ultra sketchy
Hella under steer
@@deannagrayston4778 really not even fixable, anyone who had driven fully locked 4wd knows how much steering they lose over a open front diff
cant turn the front, loosen up the rear.
I’d still like to see the front axle overdriven by a small percentage. It’d be hell on the front chain and sprocket, but I bet you would pull through turns.
That bronco should be called the "wild stallion"holy shit guys
😂
One of your neater projects. Probably the smallest "Power Wheels re-engine" kart out there. 👍
That bronco is as cool as the other side of the pillow. One of my favorite builds.
SHHHEESH
Hahaha thanks dude
@@CarsandCameras Wtf
U responded to him 😵😵😵
now that she rips, you have to do something with the steering, so when you turn the yoke the wheels turn the same amount.
yeah, tip the steering wheel ahead so its not jammed into crotch so hard and adjust linkage so it turns faster
yep. loosing time on the corners because it either understeers or you have to slow down to turn.....
Love the intro. Got to love those "hold my beer!" moments 😂
Damn bro, when u came around that last turn on 3 wheels, I thought you was gonna fly over that pile of rocks... like oh shit 😳
It desperately needs a torsion bar in that would solve all of their problems with the way it sways back-and-forth and gets on 3 wheels.
Great runs, guys! 45 is fantastic! I’m getting 47 out of my Predator 212 on a Minibike, so 45 in a 4wd is impressive!
You guys are awesome! Have you thought about a radar gun?, be cool
That Bronco is just insane! I only wish I had half of John's mechanical skills. Crazy good cart!
Big fan All the way from Denmark 🇩🇰👍👍 love your work 💪👍👍👌👌👌
Same from Finland 🇫🇮
Can't wait for the collab!!!!
in a previous video i said i wasnt a fan of paytons. i gotta be honest, hes definitely grown on me. he fits right in. keep up the good work guys!
Can't wait for the collab! 👍
Love how much the suspension moves, so capable!
Take good care of those snakes! they'll help keep the rodents away. A snake wont chew your wiring like mice and rats will
This is one of my favorites. That things is amazing
Yes came out great all while looking complex and sort of high maintenance
@@shayestrx250r haven't had a problem yet with maintenance!
thanks! if only the steering was a little tighter! The little thing rips
Can't wait to get back in Texas to start building my crazy dreams and make them real. You guys are doing it and living the dream. Stay safe ride safe lasvegasminibikes 🤙🤙
Keep these badass vidoes coming guys!!!
I rejected piped and a few other funs to a kawi prairie 650 I couldn't figure out why I couldn't get it right now while I was writing and I lifted up the air cleaner lid took off in about threw me off the back. Air duh it had a snorkel. Stock it did about 55 and now it does 85 which is pretty good for a 4x4 ATV. If you pump it it'll do a wheelie it's fun to have to ride you just stare with the rear I've even done a wheelie backwards in four wheel drive I was selling them at the time guys would say I don't need one that big I'd fire that up and tell him how it was my wife's. It helped me sell quite a few. The day I put the pipe on on the guys from the shop came running out thought someone was still in his Harley. Watching the bronco diagnosis reminding me of it
i Was just sitting and thinking.. hey it's wednesday and where are the video... and it just poped up.. :-) Thx for saving the night..
I am sooo excited to see this thing in person!
That little Bronco is a Bona-fide Ripper! Love it!
Cars and Cameras is so perfect. We have Ike, the senior mechanical know-how, but not afraid to open up the engine. Peyton, the intern, great camera shots, provides muscle when needed. And then John, CEO, editor, OHWOWITSFAST GOKART GO BRRRR Maniac (but he still knows his engines). And then Charles: ????
You guys have a great thing going, keep being awesome.
Amazing run guys !!!.....great tune Isaac!!
Is there going to be a video on the new shop being built? I want to see the progress!
Gotta get some more steering angle on that bad boy. Looks like it's hard to go around tight corners.
That's because they didn't put in a center diff.
@@morgankovarik3649 I think it has no rear diff either.
@@morgankovarik3649 center diffs are retarded on a 4x4 vehicle (let’s be clear, I’m talking about true 4x4, not awd) It’s just another point of wear/weak link. What it really needs is a selective 4x4 option by making a new version of the front drive axle that the sprocket rides on with a section that’s splined, and another that that isn’t, with a collar that slides back and forth to engage the splines to the sprocket. Then all you need is a push pull cable to move the collar back and forth.
@@carsonhammond6204 that's like putting a Lincoln locker on a front wheel drive car. You can still put a front diff in it and be just as strong as what's there now if not stronger.
all 4 wheels are locked at all times. the front hubs and CV axles made steering very tricky, but it still handles great imo
@vasilycustombuilds glad to see you join the group man.
This channel never disappoints, great video!
Cool Build fEllAz!! Put a Roll Cage and 6 point Harness on that Thing ..and send It Off them Jumps! 👍
That is sick man 45 mph! I would have never guessed it would go that fast. I'm sure with some tweaking and a long stretch of asphalt it got 50 in it. Please wear protection guys.
Love the air filter info, determining Enrichment. 🤌🏾
You guys are awesome. No better way to take a break from mowing. This Old Man Loves y'all. 🛵😎💝💝
I haven't seen the 420 cc golf cart build me and my brother put a 212 predator on our golf cart we got a problem with our torque converter
The suspension is SICK on the bronco!!!
It desperately needs an anti roll bar, could solve all of their problems with the way it sways back-and-forth and gets on 3 wheels. It would definitely give the drivers a boost in confidence knowing that he's not gonna get too much weight hanging over the side & worsening the roll causing it to actually roll or land on him possibly. Hes only able to use the steering wheel for an anchor to keep him sitting up straight when the body rolls around from side to side. Anti roll bar will solve all of this. I wish they would read all the comments.
Just a heads up because I’ve never seen you do it and can’t tell on video, but those foam clamp on filters need to be oiled. UNI makes a good oil and it will help with a lot of your jetting issues. I manage a motorcycle dealership and we have to oil the air filters more on brand new out of the crate KLX 140 just to get them to idle. And don’t be scared to saturate it. It will tack up and give the dirt something to stick to as it’s pulled into the filter.
carsandcameras
Wow that thing crazy might need a wheelbar Ike fix gd carburetor
I could be wrong but even at top speed it sounds like it could rev a lot higher, maybe it could benefit from some lower gearing to take advantage of that
Holy hell. That thing is incredibly awesome for its size. I feel quite certain that “scary awesome” fits.
I dunno if I’d ride it but it is really awesome to watch.
“Stupid fast” is my time to sign up! 😎👍
@@glenncaughey5044 When I was a lot younger, I would be right there with you. I’m at the age that if I sleep wrong, I have to turn my entire body to look at anyone that isn’t in my direct line of sight.
@@MrVolksbeetle
I know what that’s like, sorta nearing half-century
@@glenncaughey5044 Cheers fellow near half centurion!
If you grind a small flat on the cutting edges of the drill bit it won't grab on the plastic lessoning the chance of cracking it.
The flat should run paralell with the drill bit if that makes sense to you.
The flat doesnt have to big,1/32 is sufficient.
I've machined a crap load of acrlic and other hard plasics over the years and this was a life saver, It also helps stop chipping on the edge of the hole.
You guys should put a cheap lift on that durango. I bought a leveling lift for mine that lifts the truck 2 inches in the rear and 3 up front to level it out along with some 285/75r16 (33 inch tall) venom power terra hunter xt tires. Stock tire is a 31 i believe so it will be about 3 to 3 1/2 inches taller which will be a great stanced look, i cant wait!
Congrats...The Voiceover method is good vs the status previously imo.
If I may request a test. Swap front and rear wheels to gain steering traction and nose balast. Caution on the lock to lock as may rub body. Awesome work men. Anti wheely/ rear bumper to protect you guy's?.
I have to be honest when you guys were building that thing I figured it was going to turn out to be some sort of crawler that didn’t work very well I really didn’t think it was going to actually be able to rip I have no faith in you guys but damn that thing hauls now I am really impressed
The mini bike in my profile Pic would hit 60 mph and was most definitely one of my favorite builds
Always drill pilot holes boys 👍
If you have the mechanical fuel injection on the carb , I twist the throttle a few times and it starts first pull
It would definitely benefit from a detachable anti-roll bar, tho I know it’s almost impossible to have one because of the drivetrain
It desperately needs an anti roll bar, could solve all of their problems with the way it sways back-and-forth and gets on 3 wheels. It would definitely give the drivers a boost in confidence knowing that he's not gonna get too much weight hanging over the side & worsening the roll causing it to actually roll or land on him possibly. Hes only able to use the steering wheel for an anchor to keep him sitting up straight when the body rolls around from side to side. Anti roll bar will solve all of this. I wish they would read all the comments.
@@danieljames5875 lol true, though like I said it’s almost impossible due to the way the drivetrain is setup
I can’t wait to get the new 650cc in my buggy I’m starting on putting it in it today thanks to you guys for the inspiration 😁😁😁 love ya videos and love Ike’s videos too keep up the great work guys all the way from Australia
That is such an awesome build! Keep them coming!
You guys really NEED to put a 2:1 steering quickener on this thing.
It desperately needs an anti roll bar, could solve all of their problems with the way it sways back-and-forth and gets on 3 wheels. It would definitely give the drivers a boost in confidence knowing that he's not gonna get too much weight hanging over the side & worsening the roll causing it to actually roll or land on him possibly. Hes only able to use the steering wheel for an anchor to keep him sitting up straight when the body rolls around from side to side. Anti roll bar will solve all of this. I wish they would read all the comments.
It needs at least 2 diffs before it will go round any corner
Dang that thing is a ripper 🔥👍✌️
One trick that farm tractor manufacturers use to help with the steering is to turn the front wheels two or three percent faster than the rear.
This does lead to faster tire wear, but it will help pull the front end around in a corner.
If u guys ever make it up to N. Iowa. I got a bunch of parts u might be interested in.
You’ve made it BIG, when big oil gives you free stuff! 👍🏎💨
Sweet ride
Man you guys are crazy i love it . I have an escalade with a 110cc but i have a 200 atc 5 speed with hi liw from an atc im thinking of installing now , thanks guys
It rips. Stiffer springs in the back would probaly make the front dig in a bit more, it seems like it understeers a lot.
Wow that's fast, I always wanted to see a man ride a mini bull at 45 mph. Thanks guys, hold on tight don't let it kick you off.
ike flexing the snap on tap handle
I'm just sayin... It's crazy ike said 12 pulls, then on the 11th it started for a sec. Then 12th it ran. Y'all are amazing my dudes!!!
Wow awesome video guys 👍🏻👍🏻the bronco is sweet and fast nice 👍🏻
Haven't watched in a while. I like the change on how this is edited and little info. Nice.
That thing is sick really awesome
Get your cameraman one of your 20 scooters to ride on back and forth
I think that's the fastest John has ever drove anything LOL.
When is the next time yall are going to Busco, and if you see this tyranis, go with them
Same question I been asking in every video and have yet to get a response lol
RBG is bringing it to this dust up Yawl!!
He's gotta solid sled for this one so best of Luck to all 4 of Yawl now on team CnC...💯
My day is made when u post a new vid
Step drills work the best when drilling plastic or acrylic
Still waiting to see some "It'll be fine technology" shirts! :)
Quick tip if you think it is running out of fuel ie running lean, pull the choke when you think it is running lane if it runs better you know it is a fuel issue
Nice.. love the suspension. Oh yea, ..how about a pit bike for Peyton, think you got one laying around?
You fellas hit that one out the park, see ya
Let’s get some detachable sway bars front and back! You’ll be at the top of the tier!
The other carts have the power but not the traction or room on this track.
It desperately needs an anti roll bar, could solve all of their problems with the way it sways back-and-forth and gets on 3 wheels. It would definitely give the drivers a boost in confidence knowing that he's not gonna get too much weight hanging over the side & worsening the roll causing it to actually roll or land on him possibly. Hes only able to use the steering wheel for an anchor to keep him sitting up straight when the body rolls around from side to side. Anti roll bar will solve all of this. I wish they would read all the comments.
Bronco is awesome! You guys should bring back pugly and put a predator motor on it. It would be interesting to see how you convert things on pugly to take a predator motor.
what app do yall use for the speed🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔i also think yall shoud do something about how it steers looks like it was ment to go on strait aways
That thing runs
Dang boys that thing rips
The motor in the Bronco is sounding healthy
If your needle for the throttle has a clip for adjustment, you should try pulling the needle out of the main jet by dropping the clip one or two spots that will allow more fuel flow as well
Hell yeah, 44.9 mph , you sent it john
If you use a Uni-bit to drill acrylic, it comes out nice.
If you add a bit of overdrive in the front, maybe 5-10% so like go down a tooth or two. It will help with turning and reduce understeer.
Wow.. that thing sure came alive
Cars and cameras, try out an oil cooler for one of your builds. I made one from a 7 in by 12 in radiator, low pressure fuel line, a electric fuel pump running 1.5 -5 psi, with a 6mah craftsman drill battery. You have to drill a hole in the block in 2 locations, one is below the oil level that's a feed line and a return line. I got longer rides out of my engines before getting too hot.
Nice! Great stuff, this weekend is supposed to get to 40 Celsius. So I'll be installing my GPS valve springs and 60 tooth sprocket. At the same time deleting the governor on my BT200X. Once thats done I'll reshoot this video. What upgrade carb do you recommend ?
Getting about the full 10 HP out of it now. Nice.
Nice work
Great to see this 🤯
Wow!! "He's going for distance. He's going for speed." lol. One thing I noticed was that the steering seems to be off. The "steering wheel" was going completely vertical and the front tires didn't seem to be doing much at all. But damn that little beast can go lol. Sounds like a four wheeler! BRRRAAAAHHHHPPPPP lol
Ouch its seems some foam may be nice in that Thang.. U guys are Wild.....
"That Grin" with a picture of his head at that moment cartoonized and cars and cameras on the back on some shirts. Real simple. WILL SELL.
That looks so fun!
O like that the vids are a bit longer than others than it feels like a show
ok serious question would it be hard if i tried to all wheel drive swap a manco dingo?