@@noahpaulette1490 It simply cant handle the ducati engine, Like with boat hulls theres only so much power you can usefully put into something. I like the 670 engines but they're not high performance (lawnmower ohv). 670 engine: torque build like a quad or tow-cart. Dragster: get it running and enjoy it for what it is, simplify its drivetrain if they can, Heck a 420 could be cool.
Good job guys, it is fun to see what all you guys get into and build! Thank you so much for keeping it clean and not talking all the profanity that a lot of other guys do on their channels. It's a relief to be able to watch something without all the cuss words that people seem to think is necessary in order to impress their viewers. Keep up the good work and keep on building!!! God bless
I have been anticipating this moment! lol so glad to see that thing going through some mud LOL Good job guys! I look forward to seeing all the kinks worked out
Seeing it spin all 4 in the mud is really cool. I hope it's been worth the effort because it's been cool seeing it come together. I definitely want to see the dragster again as well. No matter what you choose to do with it, let's see it run.
Good point to move the brakes to the jackshaft, that will give you four wheel braking power verses an iffy brake in the rear. Or to save time and labor swap the caliper to a hydraulic. Good job guys, cant wait to see next weeks episode.
I would enjoy seeing another mower build, maybe a mud mower or something this time. It’s fun watching you guys do things that we can build from aswell!
For the seat(bottom, back, and sides) I suggest some interlocking EVA(or similar) foam and some good spray adhesive. Cheap, fast, easy, water resistant, and can look great. You can double it to whatever thickness you want, it comes in several colors, and has Diamond Plate finish. You can even use abrasives to round the corners and cut designs in it. You can even heat it to make it mold to inside corners or the plastic. Yes, I really like the stuff.
John, where you washed the bronco looked like a perfect place near the tap, to park the karts to keep them out of the weather till you get some extra storage Tony from Western Australia
@@smallblockbigbang4581 And manufacturing the non-existent details of 50psi and Ike's frustration. So no, not "stating a scene", rather dreaming one up.
They dont do things fans want sadly.. see the views compared to grind hard plumbing! Nobody wants to see this predator 212 junk anymore.. just like seeing a rerun over and over! Hell they cant even adjust a carb in this video to get it running right wth is going on with this channel...
@@anythingmotors9781 I commented multiple times to bring back the drag rail before it happened. Now its forgotten about again. I'm kind of done with this power wheels stuff. Grind hard does it, Vasily does it, and RBW did it. The custom from scratch builds like the cross kart and trophy kart are awesome to me because it's unique. Now all of these fabricators have plasma tables, lathes and mills. This is where I lose interest because most people don't have access to this equipment. That is why I quit watching Red Beard's Garage. When I started watching these guys it was simple karts, simple builds with every day equipment and tools that everyone has access to. I bought a spiderbox kart because of the videos and what they showed you could do with it. I think that is why I like Ike's Nova. Its basic stuff. Finish the trophy kart. Fix the cross kart. Get back to what built you guys up. Quit doing what everyone else is doing. Oh and cut down those @#$@ trees, lol.
@@anythingmotors9781 and don't forget about the mower that Ike flipped. Vasily is building a mower with a snowmobile engine on it and a cross kart with a GSX engine on it. Bring him out to the C&C track and go head to head. That would be awesome.
@@trethatdude I agree. Once they decided to cut it, that opened it up for all types of customizations that they missed out on. But I guess that's why their motto is "it'll be fine". It doesn't have to be good/perfect...just "fine" will do.
for the fueling issue, i've used a flexible conduit , or rubber fuel hose , to connect the outer and inner pipe. Or cut the pipe to the tank lower and add a 45 degree elbow at each end of the connecting pipe. Mount the body section, add a short extension to clear the body, and use rubber fuel hose connection to the stand pipe for best fitment and ease of filling.
A Tractor Pull machine with dual 670's or something nuts for the next build. Might need to build a sled too unless there's mini tractor competitions around you. A Sled would be a good test along with track times for the fleet and guest-get-togethers. Heh heh, or something with tracks. Half track a side-by-side? Great fun!
You guys need to make a comfy cart. Design it around the person so it'll be comfy with a padded seat & good suspension. All of your carts seem to be tight somewhere or another
That gap in the two body sections at the step thru drives me crazy. Need to find someone to 3D print you a section to fit it or go buy a second one to cut a piece to fill in that gap. And personally, I think some moderately sized fender flares would look good on it, helping the body not look so small compared to the wheel track. I keep hoping you guys are gonna do some project w/ the snowmobile engine. And I would love to see a Tow Truck Kart project. I think a functional tow truck gokart would be such a fun, well-received project and something you could use at the Cars&Cameras HQ for other builds when they have probs and need a tow back to shop, or fuel, or work at location. Could have a small winch on front, fixed boom on back w/ beefier winch, some fueld and tool storage, and of course, flashing lights and cool paint job. Every time you use it you could highlight the build series for it to further views.
Heys guys came back and watched this what a fun project . I have a repair I am doing on a chinese dao Atv quad (new carb) 125 cc forward and reverse gear it made me think about this little dude .
Dadgum guys, that thing turned out so great. I love how you can see the cvt turning, please don't cover it up. Definitely needs a splash guard underneath, but it needs to be showcased. Seriously guys, so much coolness 🤘🤘🤘
for the throttle use brake setup from BMX bike head stem that allows 360 rotation without binding the cable. For the brakes , how about regular foot rest, on a pivot? Or a Hydraulic on the steering wheel lever, of course use a clutch slave cylinder or motorcycle style cylinder , the regular handle bar mounted may be in the way. That type only uses 1-2 in travel, for lots of pressure. If you go the foot style, put the pivot in the center (under the arch, rocker style) so it doesn't require a lot of room for travel
I’m getting ready very soon to modify my Firefox 620 for camping and fishing. Roof rack, lights, fishing pole holders, new engine... That kinda thing. Would love to see y’all do an episode along the same lines.
I have a suggestion, there were some "pro" bmx bikes when i was a kid, you could turn the wheel as many turns you want. They had some kind of collars around the fork i guess, for brakes, both front and rear. Maybe you could use something like that for the brakes and throttle. Any way nice progress guys, keep up the good work! Found it, google gyro bmx brake kit
@@Shredxcam22 And? They've drilled many a gas caps in past videos. Gopower sports used to sell them non-drilled after all. How do you think they are pressurizing it at 5:16 ? Not Isaac and John's first rodeo.
I love how they're the kings of just finding s*** throwing it together like the wagon rat Wagon build they have a plan for this and it comes out pretty much too small to really be enjoyable for issac anyway I feel like. Kinda of a mess but id drive it
@@rickallen3795 It will handle more stable and predictable, and have the right amount of room for something as fast as it's going to end up being when they get the gearing right. -for any rider.
@@rickallen3795 I wish more people agreed in this comment section. unfortunately MANY people here seem un-interested in the shit that actually matters.
for a water guard, you might look into a system like the side by side UTVs use, or a similar system, shes lookin' pretty sweet so far guys, cant wait to see the final product when all of your R&D and testing pays off, shes definitely a ripper
Can't speak for everyone but I miss the Cross Cart. So either the snowmobile motor project or updating the Cross Cart would be my choice. Great stuff guys...
I mean we need the riding mower build back... that was sick... I haven’t looked at my riding mower the same since .... annnndddd you still have to paint that bronco frame up!!!
that thing is so cool, loved it slinging mud when you were walking beside it. I think you guys need to redo the monster truck into a 4x4 like how you did this one
Love to see a solid axle 4 wheel steering swamp buggy. Maybe trying to connect a pair of 212s at the crank firing on the opposite stroke. Engines mounted high with the crank in line with a central drive shaft with the torque converter under the steering wheel in a water resistant tub.
Duuuude i freaking love this thing!!! Once you boys get'r dialed in and geared right she's gonna go damn near anywhere lol will deff help in all thos deep mud holes and stuff at Bosco Beach
Those pumps tend to push fuel a lot more efficiently than they pull it if you ever have priming issues maybe mount it under your tank cool project guys 🤘
Take what you’ve learned from all your projects and and make a version of the Bronco that’ll fit a normal adult, like Issac maybe ? The suspension looks great, something to duel the trophy kart.. always outstanding!
Thank you guys should stretch that thing but I don't know how much work it would be probably quite a bit some stiffer shocks for sure and the other idea I had was a bumper for the trophy truck since you guys have so many trees around your course keep up the good work guys can't wait to see what you do next
Maybe you could've cut the fuel neck at an angle, that might've made cutting the access hole in the body a little difficult though. Couldn't tell if first there was a jump or the suspension, but later on looked nice getting that air! (Meaning you really wouldn't see a Bronco doing a major jump anyway, so that was about typical) When John went for the lap, was thinking ohh noo - not the tree! 😁
Lol, up here in SE Canada it's the mildest winter I've seen. That coat is too light and water is still water. It's not cold boys... There's a nip in the air.
Hey guys, enjoy your channel. You asked about another project and I would love to see another “power wheels build” but bigger and with more power. Similar to Grind Hards latest Jeep build. I love the bronco but it’s TOO small lol. Would be a lot of fun for a 5 year old though. Make a “Mans” power wheel. Would be great to see you collaborate with other channels. Thanks guys 👍🏼👍🏼
Looks to me like a tow truck build would be handy, for hauling out all the crashed and stuck previous builds :) I don't know if there is a "Mater" from Cars movies Power Wheels .
If you stretched that bronco about another 12" that thing would probably be allot more stable and comfortable. But nice work over all. Love the work you guys do. I'm a fellow fabricator builder as well. Keep on keeping on!!
On 4x4’s you should run the same size tires all around. I know it’s just a go kart but it would run better, and less stress on the drive train. I would run a tire size in between the front and rear, that would be perfect. By the way I love what you guys are doing for our hobby. Get up the good work.
Next project. How about Predator powered skateboard? No, John would kill himself hitting a tree. Maybe a utility vehicle like a Gator with a dump bed so you can haul stuff enough to be useful along with the loader bucket on the tractor. Fill it up with gravel and dump it in a mudhole near you! The gravel that is, John.....LOL! Back many years ago a friend was traded a PUCH moped for some yard work. He was deep into 2-stroke Yamahas and we started messing around with the compression. That raised it needed more fuel. The exhaust was too restrictive. We moved the ports for more power. Repeat the steps above some more. Eventually we had a ripping little SOB that could pass slower traffic on a 4-lane highway. Speed wasn't an issue as mopeds needed tags back then. Faster. So one day I decided to do a top speed run down a road as flat as a South Florida road can get. Straight as an arrow for about 3 miles. My friend had staked out a mile with white markers. We would time ourselves with a stopwatch. Old school. So I tucked down and let it go. It was flat out nothing left at the first marker. In a flash the mile was gone. I checked the watch........73mph! No. I looked again. Yep! 73! Now at 73 mph a mile goes........fast. Instead of doing the math AFTER I stopped, that intersection with that 4-lane highway was getting dangerously close. I flashed past my friends house at about 60mph with less than a half mile to the stop sign. I hit those moped brakes for all they had. Which was at about 30mph! At that time they faded into moped oblivion! Watching cars zipping both ways on the road ahead, no chance of slowing down I accepted death, closed my eyes and gunned it. I felt myself go through the dip between the lanes and the front wheel get light. Knowing I had gotten hit I opened my eyes and...........i had made it across! I got off the gas and coasted to a stop, finally. Then I got the shakes! I calmly shut the bike off, leaned over and puked in the ditch. An old lady came out of her house and asked if I was ok. Something I ate, I said. Getting back together I started the death moped up and quietly rode back across the highway. Getting into my friends driveway he excitedly asked why in the heck I was trying to get myself killed riding wheelies across US Route 41.......
![Best of kartcross [16.000 rpm] | Asturacing](/img/n.gif)
It would be cool to see more riding content. You guys have tons of machines that we never see after you're done with the build.
Most of them are out of commission rn
It would really be cool to race every single one of their builds in a race but only if they had enough people to drive them.
Time to bring out the dragster and start getting it ready for spring.
YES!!!!
I'm not a fan of the dragster (lawnmower engine, overly complex).....but the mans right.
@@tomstech4390 the 670 was cool but I think they should put the ducati engine on it like they were thinking a while back.
@@noahpaulette1490 It simply cant handle the ducati engine, Like with boat hulls theres only so much power you can usefully put into something. I like the 670 engines but they're not high performance (lawnmower ohv).
670 engine: torque build like a quad or tow-cart.
Dragster: get it running and enjoy it for what it is, simplify its drivetrain if they can, Heck a 420 could be cool.
I would like to see more go kart revivals! I love watching you guys bring old machines back to life and surprising you how fast they can be.
Good job guys, it is fun to see what all you guys get into and build! Thank you so much for keeping it clean and not talking all the profanity that a lot of other guys do on their channels. It's a relief to be able to watch something without all the cuss words that people seem to think is necessary in order to impress their viewers. Keep up the good work and keep on building!!! God bless
I love watching y’all do ground up builds. Super satisfying seeing a project start as junk and become a ripper
what about the snowmobile with wheels? John's dad sure looked like he was havin fun.
They don't have many around down south.
Good memory! That was a sweet build!
LOVE YOUR CHANNEL been watching for over 5 years. you guys have come a long way
@@mostlymotorized says the dude with 4 youtube videos
@@mostlymotorized GOT EM
I have been anticipating this moment! lol so glad to see that thing going through some mud LOL
Good job guys! I look forward to seeing all the kinks worked out
Bring back the 4 engine kart. That needs to be gone through the C&c2.0!
That thing was sick and with a little bigger and more aggressive tires it’d be a cool match up for the bronco both being 4x4
Ayo they brought it back
@@mostlymotorized each engine cost $869
Seeing it spin all 4 in the mud is really cool. I hope it's been worth the effort because it's been cool seeing it come together.
I definitely want to see the dragster again as well. No matter what you choose to do with it, let's see it run.
SENDING IT !! (Rough translation: It'll Be Fine)🤔🔥
There's a note on the frame of my truck it says "if you see this we sent it"
@@FUCKEDUPFAB perfect
The fuel neck does look like a pipe bomb.
U guys are killing 2021
John looks like the cover photo for paranoid by Black Sabeth
😁😂🤣🤘
Sabbath.
Good point to move the brakes to the jackshaft, that will give you four wheel braking power verses an iffy brake in the rear. Or to save time and labor swap the caliper to a hydraulic. Good job guys, cant wait to see next weeks episode.
Turbo diesel mini tractor puller, I'm thinking 2 or 3 cylinder diesel would be really cool.
I would enjoy seeing another mower build, maybe a mud mower or something this time. It’s fun watching you guys do things that we can build from aswell!
It would be awesome if you ever got snow, to have 4 tire chains and a plow on the bronco. Would definitely love to see
@Kurt Forgot about that
I think the drag rail needs that 100hp 670cc snowmobile engine 😎
I want to see you guys build something with a snowmobile motor that way when you get in the mud you can really sling it
For the seat(bottom, back, and sides) I suggest some interlocking EVA(or similar) foam and some good spray adhesive. Cheap, fast, easy, water resistant, and can look great. You can double it to whatever thickness you want, it comes in several colors, and has Diamond Plate finish. You can even use abrasives to round the corners and cut designs in it. You can even heat it to make it mold to inside corners or the plastic. Yes, I really like the stuff.
Dam your guys camera is excellent!
John, where you washed the bronco looked like a perfect place near the tap, to park the karts to keep them out of the weather till you get some extra storage
Tony from Western Australia
Watching John put 50 psi in that tank and hearing ikes frustration
Here we have somebody trying to create controversy out of thin air.
@@SportbikerNZ nope. Simply stating a scene in the video thats all
@@smallblockbigbang4581 And manufacturing the non-existent details of 50psi and Ike's frustration.
So no, not "stating a scene", rather dreaming one up.
@@SportbikerNZ 5:14 after watching for about 3 to 4 yrs id say thats about what was going on
@@smallblockbigbang4581 And I've watched all but one or two. Not hard to spot a comment stirrer.
Do another mower soon bros. This was cool but grind hard did it ages ago. Give the people at home a project alot of people can get right into
Most interesting TH-camrs out there
Like the fact that y'all are always finding ways to improve these toys. I have learned a few things from you guys, thanks!
Next project....FIX THE CROSS KART and send it heads up against the trophy kart
They dont do things fans want sadly.. see the views compared to grind hard plumbing! Nobody wants to see this predator 212 junk anymore.. just like seeing a rerun over and over! Hell they cant even adjust a carb in this video to get it running right wth is going on with this channel...
@@anythingmotors9781 I commented multiple times to bring back the drag rail before it happened. Now its forgotten about again. I'm kind of done with this power wheels stuff. Grind hard does it, Vasily does it, and RBW did it. The custom from scratch builds like the cross kart and trophy kart are awesome to me because it's unique. Now all of these fabricators have plasma tables, lathes and mills. This is where I lose interest because most people don't have access to this equipment. That is why I quit watching Red Beard's Garage. When I started watching these guys it was simple karts, simple builds with every day equipment and tools that everyone has access to. I bought a spiderbox kart because of the videos and what they showed you could do with it. I think that is why I like Ike's Nova. Its basic stuff. Finish the trophy kart. Fix the cross kart. Get back to what built you guys up. Quit doing what everyone else is doing. Oh and cut down those @#$@ trees, lol.
@@KWhite75 fr dude.. the dealth kart i wanted them to bring back.. i only watch ikes channel now mostly too
@@anythingmotors9781 and don't forget about the mower that Ike flipped. Vasily is building a mower with a snowmobile engine on it and a cross kart with a GSX engine on it. Bring him out to the C&C track and go head to head. That would be awesome.
Sadly that cross kart is a hunk of crap
That spring rate and damping looks perfect!
Really nice build but I can't help imagining how much more capable this would be if it had a longer wheelbase.
Not to mention, more comfortable
@@paulhopkins1905 Yeah and then maybe it'll actually look enjoyable for Ike to ride. He looks so miserably cramped on there.
They cut the body you think they would’ve stretched it
@@trethatdude They build cool shit, but also do really dumb shit in every build
@@trethatdude I agree. Once they decided to cut it, that opened it up for all types of customizations that they missed out on. But I guess that's why their motto is "it'll be fine". It doesn't have to be good/perfect...just "fine" will do.
What a awesome looking machine. Good job guys.
Abraham Isaac, where is your top hat? Lol
Yep, next thing you know he's gonna have 3 wives and 10 children.
Ike’s girlfriend?
Haha his great granpappy rocked the tophat
for the fueling issue, i've used a flexible conduit , or rubber fuel hose , to connect the outer and inner pipe. Or cut the pipe to the tank lower and add a 45 degree elbow at each end of the connecting pipe. Mount the body section, add a short extension to clear the body, and use rubber fuel hose connection to the stand pipe for best fitment and ease of filling.
2:36 Anybody else catch that super smooth transition?
yep, two welds for the price of one.
I'll go check it out
I think that some floating fenders over the wheels painted the same color as the body would look awesome, and be very functional
“At least 14” off the ground” 😂😂
Yeah male inches....
He added the 4" air from the back to the 10" air from the front. Thats 14" of air LOL
A Tractor Pull machine with dual 670's or something nuts for the next build. Might need to build a sled too unless there's mini tractor competitions around you. A Sled would be a good test along with track times for the fleet and guest-get-togethers. Heh heh, or something with tracks. Half track a side-by-side? Great fun!
Sweet top 20 :)
it would be great to see a completely over the top build with a Predator 670! something like this build, but even bigger and better! love the channel!
More street style karts!
I second that 👍😎🏁
You guys need to make a comfy cart. Design it around the person so it'll be comfy with a padded seat & good suspension. All of your carts seem to be tight somewhere or another
Awesome 👏
You guys really showcase what u can do with go power sports parts excellent job
Finally the video we have been waiting for #itllbefine
That gap in the two body sections at the step thru drives me crazy. Need to find someone to 3D print you a section to fit it or go buy a second one to cut a piece to fill in that gap. And personally, I think some moderately sized fender flares would look good on it, helping the body not look so small compared to the wheel track.
I keep hoping you guys are gonna do some project w/ the snowmobile engine. And I would love to see a Tow Truck Kart project. I think a functional tow truck gokart would be such a fun, well-received project and something you could use at the Cars&Cameras HQ for other builds when they have probs and need a tow back to shop, or fuel, or work at location. Could have a small winch on front, fixed boom on back w/ beefier winch, some fueld and tool storage, and of course, flashing lights and cool paint job. Every time you use it you could highlight the build series for it to further views.
Lengthen it!!! I comment every video
Heys guys came back and watched this what a fun project . I have a repair I am doing on a chinese dao Atv quad (new carb) 125 cc forward and reverse gear it made me think about this little dude .
Build a power wheels that fits Ike next.....
With a real engine not a weak flathead
Does Power Wheels make a stretch limousine? Or a Suburban?🤣
Dadgum guys, that thing turned out so great. I love how you can see the cvt turning, please don't cover it up. Definitely needs a splash guard underneath, but it needs to be showcased. Seriously guys, so much coolness 🤘🤘🤘
What happened to the radio controlled kart? Time to redo that. 😆
Yeah would be cool if they came up with sorta a universal kit to turn karts rc they could really do crazy stuff without the risk of injury
for the throttle use brake setup from BMX bike head stem that allows 360 rotation without binding the cable. For the brakes , how about regular foot rest, on a pivot? Or a Hydraulic on the steering wheel lever, of course use a clutch slave cylinder or motorcycle style cylinder , the regular handle bar mounted may be in the way. That type only uses 1-2 in travel, for lots of pressure. If you go the foot style, put the pivot in the center (under the arch, rocker style) so it doesn't require a lot of room for travel
Would love to see a cart with twin chainsaw engines
I’m getting ready very soon to modify my Firefox 620 for camping and fishing. Roof rack, lights, fishing pole holders, new engine... That kinda thing. Would love to see y’all do an episode along the same lines.
Sweet!!
I have a suggestion, there were some "pro" bmx bikes when i was a kid, you could turn the wheel as many turns you want. They had some kind of collars around the fork i guess, for brakes, both front and rear. Maybe you could use something like that for the brakes and throttle.
Any way nice progress guys, keep up the good work!
Found it, google gyro bmx brake kit
Is the fuel tank not vented ? That'll be an issue pretty quickly
They have a small hole in the cap. Or atleast thats how they were air testing for leaks
You realize the gas cap is how all these carts vent?
@@SportbikerNZ you dont say. But instead of a cap with a vent they were going to use a pipe cap.
@@Shredxcam22 And? They've drilled many a gas caps in past videos. Gopower sports used to sell them non-drilled after all.
How do you think they are pressurizing it at 5:16 ?
Not Isaac and John's first rodeo.
@@SportbikerNZ have you seen the garbage they build? They keep using go china sports parts so it wouldn't surprise me if they put a non vented cap on
Thats definitely the best jumps out of all the karts so far.
Remember when they said they would finish it in time for the overland trip Lmaoo 😂
I love how they're the kings of just finding s*** throwing it together like the wagon rat Wagon build they have a plan for this and it comes out pretty much too small to really be enjoyable for issac anyway I feel like. Kinda of a mess but id drive it
Everything they build is to small
Love to see all the progress! Always looking forward to the next video.
Your filling a gas tank next to an OPEN FLAME HEATER!
It'll be fine.
You shoulda seen the atomized fog in my garage while I was spraying poly!
I would LOVE to see a kart with something similar to a DF goblin chasis. Great to see the power wheels jumping!!
Make it longer! 🤪😉
At least lengthen it enough for Issac to enjoy driving it.
@@rickallen3795 It will handle more stable and predictable, and have the right amount of room for something as fast as it's going to end up being when they get the gearing right. -for any rider.
@@rickallen3795 I wish more people agreed in this comment section. unfortunately MANY people here seem un-interested in the shit that actually matters.
Quick question. Would a centrifugal clutch or a centrifugal disk clutch still work when submerged underwater????
Fueling indoors near an open flame. What could go wrong with that? No worries, you'll be fine.
Nowhere close to "near". Oh the hand wringers.
for a water guard, you might look into a system like the side by side UTVs use, or a similar system, shes lookin' pretty sweet so far guys, cant wait to see the final product when all of your R&D and testing pays off, shes definitely a ripper
Can't speak for everyone but I miss the Cross Cart. So either the snowmobile motor project or updating the Cross Cart would be my choice. Great stuff guys...
I mean we need the riding mower build back... that was sick... I haven’t looked at my riding mower the same since .... annnndddd you still have to paint that bronco frame up!!!
Check out Vasily Builds. His mower has a 110hp jet ski engine!
how is the pond doing sense you put in the aerator?
Id like to see you guys build a short course style truck
that thing is so cool, loved it slinging mud when you were walking beside it. I think you guys need to redo the monster truck into a 4x4 like how you did this one
Love to see a solid axle 4 wheel steering swamp buggy. Maybe trying to connect a pair of 212s at the crank firing on the opposite stroke. Engines mounted high with the crank in line with a central drive shaft with the torque converter under the steering wheel in a water resistant tub.
Great job on the whole frame build the entire project. You guys always get a auto thumbs up
Central California Watching
Tracked mower for the mud . This time of year could be fun
Duuuude i freaking love this thing!!! Once you boys get'r dialed in and geared right she's gonna go damn near anywhere lol will deff help in all thos deep mud holes and stuff at Bosco Beach
Those pumps tend to push fuel a lot more efficiently than they pull it if you ever have priming issues maybe mount it under your tank cool project guys 🤘
Take what you’ve learned from all your projects and and make a version of the Bronco that’ll fit a normal adult, like Issac maybe ? The suspension looks great, something to duel the trophy kart.. always outstanding!
BEST TH-cam channel
aquatic go kart v2 with an outboard or a propeller on a jack shaft
John your barber must have been happy to see you. Looking good guys thanks for the entertainment as always
Thanks, guys, another cool kart. Can't wait to see what's next.
Love the channel, love watching the builds you guys do . You should do a 2 seater buggy
Thank you guys should stretch that thing but I don't know how much work it would be probably quite a bit some stiffer shocks for sure and the other idea I had was a bumper for the trophy truck since you guys have so many trees around your course keep up the good work guys can't wait to see what you do next
the gas setup make it look like a little smoke stack, i dig it !
Definitely need to see cars and cameras hover craft build 😉👌
Can't wait for this one to come together. Its going to be a beast
Y’all need to make a lexan or plexiglass bubble hood for that motor to keep the mud out and still look cool!!! that would be sweeet!
Maybe you could've cut the fuel neck at an angle, that might've made cutting the access hole in the body a little difficult though. Couldn't tell if first there was a jump or the suspension, but later on looked nice getting that air! (Meaning you really wouldn't see a Bronco doing a major jump anyway, so that was about typical) When John went for the lap, was thinking ohh noo - not the tree! 😁
The Gatorade air filter cover love it. Give it a snorkel
Lovin the bronco build what about the crosscart you should do that next
Sometimes you just have to send it! That thing looks like fun. Good work guys. 👍
Awesome guys well done😃, loving this build, but seriously looking forward to the completion of the trophy truck build 👍
Lol, up here in SE Canada it's the mildest winter I've seen.
That coat is too light and water is still water.
It's not cold boys... There's a nip in the air.
Look at the brake setup on like bmx style bike. The cables hook to a piece that floats on the for so u can spin the handle bars
Is it just me or every video is progressingly getting more entertaining by alot
Hey guys, enjoy your channel. You asked about another project and I would love to see another “power wheels build” but bigger and with more power. Similar to Grind Hards latest Jeep build. I love the bronco but it’s TOO small lol. Would be a lot of fun for a 5 year old though. Make a “Mans” power wheel. Would be great to see you collaborate with other channels. Thanks guys 👍🏼👍🏼
I thought welding galvanised steel was dodgy let's off some nasty fumes apart from that I absolutely love your content keep it up please
It's amazing that they started in a tiny garage and now there almost hitting 1 million subscribers proud of these guys
They're still in a tiny garage! A lot smaller than Mom's! 😂
@@donellmuniz590 true
Looks to me like a tow truck build would be handy, for hauling out all the crashed and stuck previous builds :) I don't know if there is a "Mater" from Cars movies Power Wheels .
If you stretched that bronco about another 12" that thing would probably be allot more stable and comfortable. But nice work over all. Love the work you guys do. I'm a fellow fabricator builder as well. Keep on keeping on!!
On 4x4’s you should run the same size tires all around. I know it’s just a go kart but it would run better, and less stress on the drive train. I would run a tire size in between the front and rear, that would be perfect. By the way I love what you guys are doing for our hobby. Get up the good work.
Next project. How about Predator powered skateboard? No, John would kill himself hitting a tree. Maybe a utility vehicle like a Gator with a dump bed so you can haul stuff enough to be useful along with the loader bucket on the tractor. Fill it up with gravel and dump it in a mudhole near you! The gravel that is, John.....LOL!
Back many years ago a friend was traded a PUCH moped for some yard work. He was deep into 2-stroke Yamahas and we started messing around with the compression. That raised it needed more fuel. The exhaust was too restrictive. We moved the ports for more power. Repeat the steps above some more. Eventually we had a ripping little SOB that could pass slower traffic on a 4-lane highway. Speed wasn't an issue as mopeds needed tags back then. Faster. So one day I decided to do a top speed run down a road as flat as a South Florida road can get. Straight as an arrow for about 3 miles. My friend had staked out a mile with white markers. We would time ourselves with a stopwatch. Old school.
So I tucked down and let it go. It was flat out nothing left at the first marker. In a flash the mile was gone. I checked the watch........73mph! No. I looked again. Yep! 73! Now at 73 mph a mile goes........fast. Instead of doing the math AFTER I stopped, that intersection with that 4-lane highway was getting dangerously close. I flashed past my friends house at about 60mph with less than a half mile to the stop sign. I hit those moped brakes for all they had. Which was at about 30mph! At that time they faded into moped oblivion! Watching cars zipping both ways on the road ahead, no chance of slowing down I accepted death, closed my eyes and gunned it. I felt myself go through the dip between the lanes and the front wheel get light. Knowing I had gotten hit I opened my eyes and...........i had made it across! I got off the gas and coasted to a stop, finally. Then I got the shakes! I calmly shut the bike off, leaned over and puked in the ditch. An old lady came out of her house and asked if I was ok. Something I ate, I said. Getting back together I started the death moped up and quietly rode back across the highway. Getting into my friends driveway he excitedly asked why in the heck I was trying to get myself killed riding wheelies across US Route 41.......