Thank you for this video. Magazine construction requires a lot of thought. The Soviets had a special focus on feed lips of self loading firearms. They even machined feed lips into the TT-33. They knew that a magazine is the weak link of a self loading rifle. Make it tough, make it durable.
I love seeing old ass machine tools still running and putting out good work. I used to run a lathe that was retrofitted for CNC, it was original run with the paper ribbons with holes punched in to program it. Despite its age it could hold half thou tolerances
One of the most strangely beautiful things I have seen. Men doing a job and doing it well. Producing a quality product from start to finish in a single factory. Knowing that there is honor in work, all work, no matter how hard or dirty or repetitive. I think I'm going to watch it again.
Agree, but the thing is they produce something that has one single purpose, which is to carry bullets, which also have only one purpose, which is to destroy things. All these man of great skill do, every dat when they go to work in this factory, is contribute to more and more destruction on the planet they live on. Destruction done by humans of course. It's kinda sad to watch actually, because they can use their skills for so many other things that are much more useful and benificial to mankind and the planet as a whole. It means it's basically also a waste of raw materials. The more I think about it, the more sad it gets....
@@sandervandenberg977 Sometimes you need to destroy to protect.Would you not kill a man that was about to rape/kill your wife?If you wouldn't i don't want to live in the same neighbourhood as you.Also i don't think you apply the same standarts to wildlife even though they do same things- hunt other beings for food,kill to protect the pack.Life eat's life That's the way thing's are.
@@sandervandenberg977 While I perfectly understand where you're going with this, the fact is that pacifism just doesn't work. Yes, guns and knifes kill people. But those Guns and knives at the end of the day are tools, and we can choose to use them to protect good/innocent people from the 'wolves'.
@@2312TOMAS Ofcourse I would kill or hurt someone who's about to hurt or kill, rape whatever one of nu familymembers. But you're missing the point here. The point is: Why make something that is designed to hurt or kill other living (human)beings? Why designing that in the first place? Wanting to hurt others comes from fear. It's fear that we have to overcome. Of course we need to be able to defend ourselves against "fear", but eventually it's better to battle fear itself. Then you won't need these horrible weapons anymore.
@@Commanderhurtz1 It all depends on how you see or perceive yourself and humanity. Pacifism is a very tough road, and requires saying the "right" things combined with the willingness to sacrifice and to stay NON-violent no matter what. It is however (I think) the answer to all of your "problems". There are many people though, that believe that humanity is inherently doomed to keep killing & hurting eachother, because that's in our nature, our genes or whatever. I don't think that's true. But if most people believe this, then THAT will become our common reality. Such is the power of (human) belief. So all I'm saying is: Be very careful with what you believe (in).
Get that poor guy at 3:40 a chair or lift that machine up! Watching him hunched over like that and knowing he's doing that every day is killing my back! lol. Excellent video.
Just bought 3 of these for $12.97 each. Considering the amount of manual labor put into building these they are a bargain plus they have a lifetime guarantee. A real quality product.
@@freshcancer713 what are you talking about?? Wages in Bosnia are not significantly lower than surrounding countries. Whole Balkan has low wages, and Bosnia stands somewhere in the middle. You singling out Bosniaks makes me think that you have some personal problems with them...
I work in gun factory my self , i love CNC machining and love to watch videos like this , great video , just one thing i didn’t see anybody using safety glasses , bye!🇺🇸🇲🇽
That bend in the mag adds so many stages and pieces to the production. Complicated compared to a FNFAL M14 which from memory is 1 piece of sheet I think not sure been too long
croatian or ex yugoslavian mags are made with such good craftsmanship and they feel so awesome when they are new out of the box.. you cant go wrong with one of those!
I recognized every part, every spot weld...and even what looks like factory “pre-weathering” with the paint! ‘Tis a beautiful thing! I’ll take 50, please!
That's a whole lot of parts, labor and processes and in Hollywood films guys just shoot up and chuck the empty mags like empty matchboxes. Part two should've been the title credit scene of "Lord of War". Nice video btw..👍🏽👍🏽
WOW, I always wanted to see how these mags were made, very impressive, so these are blued, like the Yugo mags? These really aren't that much more expensive than a good surplus mag, I've seen them between $17.50 and $18.95. When are the 20 round mags going to available, are they still going through testing?
Perhaps unrelated to the Matra I know, the one that makes radars, missiles and answering machines. But that was interesting to watch, and rassuring that there are still people who manufacture products like that.
1 word. Ergonomics! LOL. Stop making your workers hunch over all day. give them chairs or raise the machines so they don't get back injuries over time.
I wish that these would have been good magazines. I bought six of them and though they all locked into my rifle, five of the six jammed my rifle every other round. So I sent them back for the warranty. I got the five bad ones replaced. Out of those five, four were bad and one worked. I tossed the bad ones into the trash and bought Polish surplus mags and a 40 round bakelite. Now my rifle functions perfectly. Apparently, I should have heeded all the bad reviews that these magazines have. No other magazine jams my VEPR AK.
Someone should add an explanation of all the processes involved and the reason for them using the subtitles. Seeing it is one thing, but understanding it is another thing entirely.
If they did this in the USA, it will be one operator and one big ass computerize machine. One large roll of metal sheet on one end and at the other end a completed 30 round magazine costing $75.
I purchased a few of the Gibbs-Matra mags and the quality control was non-existent. A large percentage of people couldn't get the mags to lock up in their rifles (including Wasrs, Saigas and npaps). Reaching out to Gibbs Rifle for warranty replacement and they said it was normal for new mags not to fit and they just needed to be filed. I've never had a new or surplus mag need filing to fit any of my rifles.
As a gun enthusiast, former machine shop worker, and person who is fascinated with how things are fabricated, I could watch stuff like this all day.
I want to know why no one ever told me jobs like existed
I just recently started learning how to do this.
Me too:-)
Ok then.
@@hitman_s1 Aight now.
I've seen this several times and it never gets old. Simply amazing!!
Do you know what's that welding type heat treatment?
Thank you for this video. Magazine construction requires a lot of thought.
The Soviets had a special focus on feed lips of self loading firearms. They even machined feed lips into the TT-33. They knew that a magazine is the weak link of a self loading rifle.
Make it tough, make it durable.
I love seeing old ass machine tools still running and putting out good work. I used to run a lathe that was retrofitted for CNC, it was original run with the paper ribbons with holes punched in to program it. Despite its age it could hold half thou tolerances
Thank you Matra for a great video. It's great to see quality production with knowledgeable workers and traditional machinery.
One of the most strangely beautiful things I have seen. Men doing a job and doing it well. Producing a quality product from start to finish in a single factory. Knowing that there is honor in work, all work, no matter how hard or dirty or repetitive.
I think I'm going to watch it again.
Agree, but the thing is they produce something that has one single purpose, which is to carry bullets, which also have only one purpose, which is to destroy things.
All these man of great skill do, every dat when they go to work in this factory, is contribute to more and more destruction on the planet they live on. Destruction done by humans of course.
It's kinda sad to watch actually, because they can use their skills for so many other things that are much more useful and benificial to mankind and the planet as a whole.
It means it's basically also a waste of raw materials. The more I think about it, the more sad it gets....
@@sandervandenberg977 Sometimes you need to destroy to protect.Would you not kill a man that was about to rape/kill your wife?If you wouldn't i don't want to live in the same neighbourhood as you.Also i don't think you apply the same standarts to wildlife even though they do same things- hunt other beings for food,kill to protect the pack.Life eat's life That's the way thing's are.
@@sandervandenberg977 While I perfectly understand where you're going with this, the fact is that pacifism just doesn't work. Yes, guns and knifes kill people. But those Guns and knives at the end of the day are tools, and we can choose to use them to protect good/innocent people from the 'wolves'.
@@2312TOMAS Ofcourse I would kill or hurt someone who's about to hurt or kill, rape whatever one of nu familymembers. But you're missing the point here.
The point is: Why make something that is designed to hurt or kill other living (human)beings?
Why designing that in the first place?
Wanting to hurt others comes from fear. It's fear that we have to overcome. Of course we need to be able to defend ourselves against "fear", but eventually it's better to battle fear itself. Then you won't need these horrible weapons anymore.
@@Commanderhurtz1 It all depends on how you see or perceive yourself and humanity.
Pacifism is a very tough road, and requires saying the "right" things combined with the willingness to sacrifice and to stay NON-violent no matter what.
It is however (I think) the answer to all of your "problems".
There are many people though, that believe that humanity is inherently doomed to keep killing & hurting eachother, because that's in our nature, our genes or whatever. I don't think that's true. But if most people believe this, then THAT will become our common reality.
Such is the power of (human) belief.
So all I'm saying is:
Be very careful with what you believe (in).
Get that poor guy at 3:40 a chair or lift that machine up! Watching him hunched over like that and knowing he's doing that every day is killing my back! lol.
Excellent video.
swansea007791 Holy cow! Awesome!
я тоже об этом подумал, такую дылду ставить на такую работу не следовало, или правда на стульчике бы сидел. на долго его не хватит.
Or hire quazimoto
Either sink the man, or raise the machine. No need for him to bend over like that. Unless he just wants to. Which I don’t imagine he would.
swansea007791 where is that video
Those mags look so legit and very durable.
That was an awesome video. I always find it amazing the amount of thought and work that goes into even the most mundane items. Bravo guys.
Just bought 3 of these for $12.97 each. Considering the amount of manual labor put into building these they are a bargain plus they have a lifetime guarantee. A real quality product.
Rich McIntyre this is because bosniaks are basicaly the mexicans of europe, their wages are ridiculisly low
Over 20 years ago I bought nice heavy gauge 40 Rd mags for 10 bucks.
Rugged as hell.
@@freshcancer713 what are you talking about??
Wages in Bosnia are not significantly lower than surrounding countries. Whole Balkan has low wages, and Bosnia stands somewhere in the middle. You singling out Bosniaks makes me think that you have some personal problems with them...
@@armija bosniaks are well known in europe for being labourers more so than their neighbours
@@elmoantero99 erm no...
Alot goes into making AK magazines. Also the most rugged and reliable magazines.
Bogu hvala da jednom vidim naš program,s engleskim titlom,!! svaka čast onome ko je ovo snimio
Wow very nice. My aks are now watching this video.
Amazing! Didn't knew these curvy sticks can be that beautiful, and the music very nice too!
Very cool video!!! Thank you posting this.
Awesome!
Very simple machines. We have been trying for years to build a decent ak47 in the US and these guys can do it in an old rundown factory.
I would be very happy to see AK101/ Beryl pattern magazines come from you guys. Awesome video by the way!
Sweet vid!! All my Gibbs Matra mags run fine in the M92. I'll be buying more soon
Outstanding! just ordered a stack of these and can't wait to run'em.
I work in gun factory my self , i love CNC machining and love to watch videos like this , great video , just one thing i didn’t see anybody using safety glasses , bye!🇺🇸🇲🇽
because it's not the US? That means no OSHA.
Gorgeous work!
The finish on all those mags on the table at the end already look like surplus.
Wow very cool, a lot of work goes into producing these magazines
excellent product video!!
These mags are ten times better than any plastic crap they could make today.
Great video. I love this kind of stuff. Thanks.
Amazing, are you all gonna produce more videos of other gun parts?
Very Cool video, thanks for sharing and beutiful magazines! Keep cranking them out and il keep buying them!
Nice camera work. Please let us know any special equipment you used. Looks Great.
Wow if that was done here in the USA those mags would cost $75 each!
flgliderpilot fuck us
flgliderpilot in balkan u cane buy magazine for 10€
at least your country has the decency to make guns
Георгий Дюрич were 10 euro I will 20 euro for new ones 100% will buy 20 of them
No bro we already have US companies making them.i 4get the price
Simply a great video.... just know what they are making
That bend in the mag adds so many stages and pieces to the production. Complicated compared to a FNFAL M14 which from memory is 1 piece of sheet I think not sure been too long
croatian or ex yugoslavian mags are made with such good craftsmanship and they feel so awesome when they are new out of the box.. you cant go wrong with one of those!
Awesome music!
Very very cool! Thank you!
Very well made video thanks for taking the time to make and share. Interesting process.
Reminds me of the opening sequence to the Nicholas Cage movie "Lord of War".
I just picked up three more of these today. 👍🏼
Please show a drum ak and or .223/5.56 as well ! Thank you for posting the video and taking the time to do it !!! 06/16/19 Spokane WA !
Excellent video!
Great video. Thanks.
*sighs with a smile*
Extremely Impressive!
Thing of metallic beauty.
I'll take ten.
nice clean factory.
I bought six of these. IMO, these are the best new production steel mags out there. Beautiful fit and finish.
+civiliansheepdog3842 Where did you buy them?
Old Western Scrounger $12 each
3:39 someone get that man a chair.
I recognized every part, every spot weld...and even what looks like factory “pre-weathering” with the paint!
‘Tis a beautiful thing! I’ll take 50, please!
Absolutely fascinating. Always wanted to know how they are fabricated. Great video👍🏻👍🏻👍🏻
Nice press break
Music can make anything beautiful. Also AK can make anything beautiful too
Great video. I always wondered.
That's a whole lot of parts, labor and processes and in Hollywood films guys just shoot up and chuck the empty mags like empty matchboxes.
Part two should've been the title credit scene of "Lord of War".
Nice video btw..👍🏽👍🏽
Very interesting video. Heard nothing but great stuff about these magazines. Wish they made them in 40 round capacity....
+Joey P they do make 40s
Now you show me an American magazine done with such perfection ! Am American both this is beautifully done.
Beautiful vid.
Nice job!
Awesome video Broskies......
I got four of their magazines, excellent quality.
Built to last a lifetime.
Tapco I dont know about, but my new pmags work just fine
Awesome video.
Wow what a Job
Cool!
What is the music? Please!
Bravo momci, jedva čekam da dođu vamo u SAD
Good work fellas , can't wait for them to arrive in the USA
Proud Bosnian American
Pozdrav, Bošnjak brat! Thank you Serbs and Bosniaks for all the great artillery you guys make!
Glorious . . .
How many steps in process from coiled steel to finished product? How many man hours on average per magazine?
Thumbs up for the vid!
wow that is labour intensive!
Fantástico show
really cool video
Would love to see a video on how they mass produce the AK's.
Awesome off-center spot-welding electrodes!
(I’m not crazy foe envisioning this kind of setup, then!)
One of these came with my m92 pap
Gloves boys, were are your gloves? Metal sheet is very sharp... In Serbia similar situation in guns factory, so we have accidents.
WOW, I always wanted to see how these mags were made, very impressive, so these are blued, like the Yugo mags? These really aren't that much more expensive than a good surplus mag, I've seen them between $17.50 and $18.95.
When are the 20 round mags going to available, are they still going through testing?
These are made on Yugoslavia tooling. Croatian and Serbian mags are basically identical.
These are made on Yugoslavia tooling. Croatian and Serbian mags are basically identical.
Yea...wish they'd do a run of Valmet 76 magazines in 223 Remington (5.56mm Nato)
Thank you...some will think this is a thing of death...maybe ..but its also an thing of freedom..
Old school.
Can the one guy bent ver fishing out catches get a stool or something? Made my back and neck hurt just watching.
underground water drilling matchine
Really cool... What is the music?
Perhaps unrelated to the Matra I know, the one that makes radars, missiles and answering machines. But that was interesting to watch, and rassuring that there are still people who manufacture products like that.
1 word. Ergonomics! LOL. Stop making your workers hunch over all day. give them chairs or raise the machines so they don't get back injuries over time.
Rob Tucker watch their follow up video Chairs
ma to samo za snimanje
Over in Europe there is no knowledge of ergonomics,
That's why 90% of Americans are fat and lazy
This is soviet Russia machine doesn't come to you. You come to machine
Damn! Ill never complain about paying $8 for a new mag again..even if its korean..
Bacana muita prrcisão e eficiencia.👏👏👏
Impressive.
I wish that these would have been good magazines. I bought six of them and though they all locked into my rifle, five of the six jammed my rifle every other round. So I sent them back for the warranty. I got the five bad ones replaced. Out of those five, four were bad and one worked. I tossed the bad ones into the trash and bought Polish surplus mags and a 40 round bakelite. Now my rifle functions perfectly. Apparently, I should have heeded all the bad reviews that these magazines have. No other magazine jams my VEPR AK.
Innovation to create a magazine for one of the worlds most formidable weapons. AWESOME.
I got polymer ak mags im gonna get some steel mags now
Someone should add an explanation of all the processes involved and the reason for them using the subtitles. Seeing it is one thing, but understanding it is another thing entirely.
That's the one that will make the bolt-hold open?
I like the music. I don't know why but its weirdly calming. Anyone know what it is?
the freedom to work well in their own shop
A great gun of a great Nation
If they did this in the USA, it will be one operator and one big ass computerize machine. One large roll of metal sheet on one end and at the other end a completed 30 round magazine costing $75.
Thank you mikhain kalaslikop
was hoping for the bakolight ones
This video is soothing....
That machine gun will make a man rich beyond his wildest dreams.
Anybody notice that they don't make the springs.
I purchased a few of the Gibbs-Matra mags and the quality control was non-existent. A large percentage of people couldn't get the mags to lock up in their rifles (including Wasrs, Saigas and npaps). Reaching out to Gibbs Rifle for warranty replacement and they said it was normal for new mags not to fit and they just needed to be filed.
I've never had a new or surplus mag need filing to fit any of my rifles.