ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
DIY Shower Door Installation How To - Cantour Series by Basco Frameless Shower Enclosure
ฝัง
- เผยแพร่เมื่อ 12 ส.ค. 2024
- This video explains how to install the Roda Cantour shower door by Basco, which combines heavy glass with frameless clean lines, and features an innovative hinge that allows up to 6 inches of adjustment, making it simple to install - yet versatile - fitting today’s most commonly found opening sizes.
Here are the tools that you’ll need to properly install this door - and make this a simple project.
• 1/8” and 1/4” Steel Bits
• 3/16” Masonry Bit
• Drill
• Pencil
• Low Tack Masking Tape
• 4’ & 6’ Levels
• #2 Phillips Screwdriver
• Clear Silicone Caulk
• Caulk Gun
• Suction Cups (Recommended)
• Center Punch (if drilling into tile)
We recommend two people for this door installation due to the weight of the glass and fragile nature of the product. Supplemental instructions are available at Basco Shower door dot com. After carefully removing all contents from boxes and preparing your area with drop cloths and protective material, you’re ready to get started.
Superb thanks for teaching us
Very very good job....nice installation
Muchas gracias , me salvó la vida.🏆
This video does a great job, and every step comes to the point. Thanks for sharing
I am also doing this work
I
I
@@alihasham1946 فين؟
Yes
Very nice
nice work, I like it
Good, i like it
Feri Nugroho
How can i get the hinge accessories imported please. I'm currently based in Lagos, Nigeria. Thanks
Good job
I have acrylic shower base. Do I still need drill hole through the aluminum rails and put down anchors?
Thank you for your question! The frame comes pre-drilled. If there is no stud behind your acrylic walls, you will want to use the anchors supplied in the hardware strip. We recommend not drilling into the base. The majority of our doors are sealed to the base with silicone, with the exception of our heavy glass frameless doors, which we do not advise putting on acrylic bases due to their overall weight.
I am doing this work in pakistan
Iam egyption iwork in saudia can the company send me permit work . i hope realy
اخي العربي من اين انت
Asslamualkim
কাজ চাই আমি ডুবাই আছি
Awesome now you have a leaky shower, good job fellas. You should never drill into the curb. Silicone or not
Nonsense. However else are you going to rigidly secure the bottom of the the fixed screen? In any event, a simple but properly applied silicone bead will ensure no water causes problems in the first place. Personally, I'd lay the channel on a small silicone sealant bed - paying particular attention to the screw holes. All that said, there is no way I would have such a high and wide upstand as it is an invitation for water to puddle and potentially cause problems. A mounded shower base would eliminate this issue and still allow for good connection to the fixed and moving glass screens and would facilitate entry and exit of the shower, especially for the elderly or infirm.
Q
Not metric, so dislike.
👍👍👍