They got rid of this show and all others like it because it showed people how to do what the "PRO'S" do and save money. And the PRO'S didn't like that. This is a great video and really informative.
If you're going to drill into tile then make sure your using a 1) Hammer drill. 2) Get good anchors and screws that already come with a bit so you have the correct size bit. 3) Grab a "CARBIDE" bit the same size as the one that came with the anchors, this for drilling into tiles.Tape a refrence mark the same depth as your anchor from the tip and twice the size of the bit creating a stopper so that when you drill past the tile it doesn't shoot through the other wall when applying pressure and prevents the drill from slamming into the tile and damaging it. As a preference I add silicone to the outside of the anchors then insert it so it sets better and seals it. If you want you can silicone the hole in the wall too. This is mostly for your typical DYI person. I know it sounds like a lot of steps just to drill holes but it helps you find the correct size bit, prevents leaks and damages. Hopefully this helps.
Excellent! A couple of notations. 1. You can use the shop vac to suck the ceramic or porcelain debris as you are drilling- that stuff is nasty on the skin. 2. You really should wait 24 hrs for the caulking to fully dry before running the shower. 3. Wiping the surface of the tub or shower where the track goes with alcohol will help assure a better adhesion of the caulk. 4. Sometimes it's best to seal just the inside of the tracks toward the tub or shower, caulking/sealing the outside may cause water to accumulate inside the track and become stagnant, moldy and could rot a wall that isn't water proof. This way, a leak would be evident before it becomes a major problem.
Thank you. This is the reason why I read through the comments. Always some extra helpful tips and advice. I will keep these in mind when I install my shower doors soon.
You showed and explain everything in very easy way , now I feel that I can do that too! You help us to grow our confidence level higher. Thank you so much 😊
WOW! AMAZING how simple you made this. I have 2000-2005 gold trim glass doors that need to be replaced. SO glad to have watched this.I also need to replace faucet, etc to match ..😢
Good job. I used this video as a guide to install higher quality doors for a shower pan. I needed to drill a pilot hole for drilled into thick tile and cement board. The only problem with these glass doors is maintenance. A daily cleaning with a squeegee to prevent water spots and soup scum.
You made this look so easy compared to other videos I’ve watched! Simple and straight to the point. I’m going to install a door over my tub. The shower curtains are starting to get on my nerves lol. Thanks for sharing! ❤️
Stoked this was at the top of my list when I searched. I searched before a few months ago and couldn't find the same doors I have. The set in this video is the exact set I have. Lol... I swapped rental houses owned by the same guy and took the shower doors with me when I left but my cousins boyfriend took them out for me and now I have to figure out how to install them. Cool it's also a female doing the tutorial cause here I was like ***If a guy can do it so can I!!***
This is by far the best diy video ever, other videos i have watched, I still don’t know how to install after watching it. This video, I’m going to Home Depot tomorrow!!!
@@gillart99 my shower door didn’t arrive until 2 months ago. And I barely finish yesterday lol 😝 it was not as easy as it seem. It took me 2 days to complete the project.
I only had to flip a door that was hung wrong side out but this video also helped in setting the rollers properly. I really should have put down some cardboard in my tub and on the floor which would have prevented more scratches on both. But I got it done! Thank you.
I have mobility issues and use a shower chair. It's a pain when the curtain grabs onto me. Looking forward to replacing the curtain with a door. Thanks for sharing.
Excellent video! My shower kit did not come with instructions so this was valuable. There were studs behind the shower so I didn't need the wall anchors. Also, a hack saw with a miter box would've been way better. But since I didn't have one, I used my grinder and kind of messed up the upper track, but it is not too noticeable.
Great job your better than me, I'm just starting to learn to do home stuff myself , just bought a condo and I would like to learn to stuff myself if I can thanks
I love how quick she goes, it's like she's racing to see who can install their shower door the fastest🤣 but fr love how complete this is without any unnecessary details or shots
@@MAGAMANMy bad, just thought when the camera angle changed her arm looked to large must be the camera angle. I put up my aunt's shower doors and her video was perfect for the job. She seems nice, professional and extremely knowledgeable. Its the best video I found on TH-cam to do the job and I have been working construction for 15years.
Excellent video. Thanks for the idea. I want a shower but removing my tub would be a nightmare. Plus I like the option of havongvthe tub. Brilliant 💡 Thank you so much!
@@tom11zz884 Recommend minimum is generally 24 - 48 hours. It may differ on the product you are using. They will often state in the fine print what they recommend. 👍
She is awesome! So calm cool collected and precise explains everything so well !!! I appreciate the detail of explanation step-by-step! Thank you so much for this! I have a question. Mine is an old one piece molded bathtub unit. Is there a problem drilling through those or any extra precautions that need to be taken. Thank you.
Only because a number of people commented about how old this might be. According to IMDb, Teresa was on this series from 1995-2005. Still useful info - especially if you look through the comments! One I didn't see was her using a hammer to drive the anchors into the tile. Ouch! Maybe a rubber mallet or a block of wood against the anchors?!
Great Job, you boost up my confident and saved my $ 4500 , which they told me it’s going to cost. The only question is how the top of the frame will be held in the position since i don’t see it screwed.
The one I installed had a clip that attached into the rail of the top horizontal piece and then attached that into the top hole of the vertical rail with the screw.
@@IM-ng1ep I disagree. The doors can't possibly weigh that much because she lifted them into place. The top should always be secured for safety. She could have used screws or caulking.
Ok two things one it's illegal to run power through the walls where your tub is... Two if your shutting the power off sure stops getting electrocution right away but you may still have damaged wires as a result a fire may occur later on
Listen to me carefully.. Please make sure you don't have electrical, plumbing, or HVAC running behind your walls...(I do this for a living and you would be surprised) Great video!
I came across this video because I was searching for bottom guide replacement part for my maax shower door inner door panel. Do you know what it looks like? I was hoping you would show in inner door panel installation as well
It would be helpful to explain if the shorter or longer side of the wall guides goes on the interior of the tub. Great to see a woman doing the install too. I would only suggest add in how to fix caulking issues if not enough caulk went on and she didn't include caulking at the base of the guides, which many manuals suggest.
Thanks! Would you recommend any llw cost cutting tools for this header/top track? Kohler customer service suggested hack saw or "miter" saw. Also, the outer plastic in my default roller wheels wore out, exposing the metal underneath, and damaged the header track after only 8 years of use. I switched it out with nylon plastic roller wheeler, I hope these wheels will last longer.
So strange. I'm installing shower doors and have come up with the same dilemma. There's instructions in 2 different places and no mention of attaching the header to the wall channels the same as in this video. I'm thinking of at least adding silicone.
@@mmsabre7931 Sometimes the top is not secured because the weight of the glass doors is so heavy. But what if the doors are the flimsy type that weigh "5" pounds. Silicone will hold definitely secure it in place in most cases and also prevent water from the top. Some installations suggests a very small set screw on the inside going through the header to the side rail. I geard some doors have "clips" that are used to secure the header but I haven't run across one like that yet. I only have a few rental properties. One thing for sure, when kids are involved they will find a way to eff something up if it is not secured.
What happens if a sliding door shader? I was taking a bath and I heard a crack and all the glass was on top of me, can I buy another door and call someone to install it or should I buy everything all over?
This was great, I love the fact that a woman did it all and gave me confidence to do it myself after asking my handyman for the past 3 months!!
So did u not think a woman can do this.
21st century sir.
Did you have any unexpected issues?
@@mikezieg80 To be fair, most of them can't.
@@MAGAMANto be really fair, it’s that most of them won’t, not that most of them can’t.
Time to change handy man
They got rid of this show and all others like it because it showed people how to do what the "PRO'S" do and save money. And the PRO'S didn't like that. This is a great video and really informative.
If you're going to drill into tile then make sure your using a 1) Hammer drill.
2) Get good anchors and screws that already come with a bit so you have the correct size bit. 3) Grab a "CARBIDE" bit the same size as the one that came with the anchors, this for drilling into tiles.Tape a refrence mark the same depth as your anchor from the tip and twice the size of the bit creating a stopper so that when you drill past the tile it doesn't shoot through the other wall when applying pressure and prevents the drill from slamming into the tile and damaging it. As a preference I add silicone to the outside of the anchors then insert it so it sets better and seals it. If you want you can silicone the hole in the wall too. This is mostly for your typical DYI person. I know it sounds like a lot of steps just to drill holes but it helps you find the correct size bit, prevents leaks and damages. Hopefully this helps.
I watched a lot of shower door installation videos and this was by far the most clear, concise, and professional. Great top-rail cross-section scene.
Yes, I agree. This was very concise and straight to the point. The verbal instruction is very clear and easy to understand.
Excellent!
A couple of notations. 1. You can use the shop vac to suck the ceramic or porcelain debris as you are drilling- that stuff is nasty on the skin. 2. You really should wait 24 hrs for the caulking to fully dry before running the shower. 3. Wiping the surface of the tub or shower where the track goes with alcohol will help assure a better adhesion of the caulk. 4. Sometimes it's best to seal just the inside of the tracks toward the tub or shower, caulking/sealing the outside may cause water to accumulate inside the track and become stagnant, moldy and could rot a wall that isn't water proof. This way, a leak would be evident before it becomes a major problem.
Thank you. This is the reason why I read through the comments. Always some extra helpful tips and advice. I will keep these in mind when I install my shower doors soon.
I mainly want to do this because I HAAAATE when the curtain touches me when I shower lol
Me too...I hate it!
Me too lol
I almost jump out my skin when that happens 🤮🤢
OMG! Me too! Makes me feel sick actually.
Y'all are definitely my people! 🤭
Why did this transport me to the 90s?? Lmao.
But seriously, this is the most helpful and concise DIY video I have ever watched. Thank you!
I said to myself, she sounds like she's doing an old commercial. She sounds perfect.
The best and clearest instructions I have ever seen on TH-cam, thank you. I am getting ready to do this job!
I'm a single female and I do alot of DIY projects, so I appreciate Teresa being the instructor. Thanks so much!!
I'm so going to do this... sick of shower curtains. Thanks for the DIY video showing a woman installing it... now I'm inspired=)
You showed and explain everything in very easy way , now I feel that I can do that too! You help us to grow our confidence level higher. Thank you so much 😊
Really nice to see women getting in the building and trades . Great job
WOW! AMAZING how simple you made this. I have 2000-2005 gold trim glass doors that need to be replaced. SO glad to have watched this.I also need to replace faucet, etc to match ..😢
Well, you made this seem so simple, that I now have a project to work on this weekend!
Great job, very fast, straight to the point! less talking about things that don’t matter…
Very helpful 🎉
It's nice to see someone do it first instead of just black and white instructions
You are the best, you are the only one who explained the detailed steps clearly, bravo 👏
Best video I've seen for shower door bathtub install - much appreciated!
Good job. I used this video as a guide to install higher quality doors for a shower pan. I needed to drill a pilot hole for drilled into thick tile and cement board. The only problem with these glass doors is maintenance. A daily cleaning with a squeegee to prevent water spots and soup scum.
You made this look so easy compared to other videos I’ve watched! Simple and straight to the point. I’m going to install a door over my tub. The shower curtains are starting to get on my nerves lol. Thanks for sharing! ❤️
It all depends on the shower door. I doubt you can even find this old model anymore.
@MAGAMAN This comment was 8 months ago but actually I did find one like it. Installed. Everything is perfect. ❤️
Thanks! Ended up doing the project myself and it worked. It’s intricate and takes time. The right tools are imperative especially the drill bits. 👍🏼
This was a great video. I now have the false confidence Todo this on our renovation.
Stoked this was at the top of my list when I searched. I searched before a few months ago and couldn't find the same doors I have. The set in this video is the exact set I have. Lol... I swapped rental houses owned by the same guy and took the shower doors with me when I left but my cousins boyfriend took them out for me and now I have to figure out how to install them. Cool it's also a female doing the tutorial cause here I was like ***If a guy can do it so can I!!***
The tape!! I was wondering how I would get those to stand up and stay by myself. ;D
This is by far the best diy video ever, other videos i have watched, I still don’t know how to install after watching it. This video, I’m going to Home Depot tomorrow!!!
How did it go?
@@gillart99 my shower door didn’t arrive until 2 months ago. And I barely finish yesterday lol 😝 it was not as easy as it seem. It took me 2 days to complete the project.
I only had to flip a door that was hung wrong side out but this video also helped in setting the rollers properly. I really should have put down some cardboard in my tub and on the floor which would have prevented more scratches on both. But I got it done! Thank you.
Excellent video! I was wondering how to install doors like this and the video did a great job of explaining the process.
I have mobility issues and use a shower chair. It's a pain when the curtain grabs onto me. Looking forward to replacing the curtain with a door. Thanks for sharing.
Thanks for the good info. That’s my next project. Subscribed.
I was looking how to remove the door to replace the little track from bottom. This helped!! 🎉
Excellent video! My shower kit did not come with instructions so this was valuable. There were studs behind the shower so I didn't need the wall anchors. Also, a hack saw with a miter box would've been way better. But since I didn't have one, I used my grinder and kind of messed up the upper track, but it is not too noticeable.
OMG the part 7:04 where you showed that wheels are actually hanging fixed my problem..i thought theyre just inside 2 rails all this time..
Wow, great and very clear video!!! GREAT JOB PROFESSIONAL 👏🏾
Don't forget to Sand down the small metal bers after each cut.... for a nice professional Look....! you can use a dremel sandpaper drum bit...!
Just installed it today, thanks a million for your instruction ❤❤❤❤
Great job your better than me, I'm just starting to learn to do home stuff myself , just bought a condo and I would like to learn to stuff myself if I can thanks
I love how quick she goes, it's like she's racing to see who can install their shower door the fastest🤣 but fr love how complete this is without any unnecessary details or shots
Watch when she starts to saw the track and camera angle changes it's not her arms sawing through the rail it's 😂.
@@dozerdlx4183 That is definitely still her arm.
@@MAGAMANMy bad, just thought when the camera angle changed her arm looked to large must be the camera angle. I put up my aunt's shower doors and her video was perfect for the job. She seems nice, professional and extremely knowledgeable. Its the best video I found on TH-cam to do the job and I have been working construction for 15years.
Excellent video & explanation, blessings & Happy Holidays to you & yours. 🙏. Joey
So the only thing holding the header in place is the weight of the sliding doors pulling the header down onto the side posts?
2021 March 8.. Beautiful and Handy Person.. Love your instructions. Thank you . You got a new subscriber..
Excellent video. Thanks for the idea. I want a shower but removing my tub would be a nightmare. Plus I like the option of havongvthe tub. Brilliant 💡 Thank you so much!
You make it seem so easy! Thanks for the inspiration! :)
Well done and well explained. Thank you
Great video, with very simple instructions. 👍
Just finished my installation thanks to you . Great video !!
How’d it go?! Strongly considering
I would recommend waiting to run the shower until your silicon has time to properly set up.
How long does that take?
@@tom11zz884 Recommend minimum is generally 24 - 48 hours. It may differ on the product you are using. They will often state in the fine print what they recommend. 👍
Shouldn't silicone be added to the side rails as well?
@Bastard of the Party Yes, vertically on the interior and exterior side both where the side jambs meet the tile.
@@jackolantern404 I thought so, she failed to do that in the video. Thanks.
Thank you so much I didn’t get instructions with mine !!
She is awesome! So calm cool collected and precise explains everything so well !!! I appreciate the detail of explanation step-by-step! Thank you so much for this!
I have a question. Mine is an old one piece molded bathtub unit. Is there a problem drilling through those or any extra precautions that need to be taken. Thank you.
Thanks for helping us put our shower doors back on!
Love love love this woman !!!💪🏻❤❤
this was an awesome video I would add that you should just use clear sealant
The best I've seen, Easy installation and loved the video
Good video & showed how to seal the frames properly 😊
Thank you, this was very helpful.
Only because a number of people commented about how old this might be. According to IMDb, Teresa was on this series from 1995-2005.
Still useful info - especially if you look through the comments! One I didn't see was her using a hammer to drive the anchors into the tile. Ouch! Maybe a rubber mallet or a block of wood against the anchors?!
Great Job, you boost up my confident and saved my $ 4500 , which they told me it’s going to cost. The only question is how the top of the frame will be held in the position since i don’t see it screwed.
The top rail does not need to be screwed since the weight of the doors will keep them in place.
The one I installed had a clip that attached into the rail of the top horizontal piece and then attached that into the top hole of the vertical rail with the screw.
Mine had a t-shape to slide into the top rail. But that meant the top and side rails had to be set in altogether.
@@IM-ng1ep I disagree. The doors can't possibly weigh that much because she lifted them into place. The top should always be secured for safety. She could have used screws or caulking.
She’s good she’s is Excellent teacher
I love this video!! GIRLS RULE!!!
Women are freaking incredible 🤩 great video
She's Smart. ❤I'm in love ❤️
Nicely done video!
I love that this feels like the 90s but was made two years ago lol
Great job! You did it so easily!
Ok two things one it's illegal to run power through the walls where your tub is... Two if your shutting the power off sure stops getting electrocution right away but you may still have damaged wires as a result a fire may occur later on
The wall panel also must be sealed as well as screwed to keep things water tight
This was great. Thank you so much.
Nice video and well presented.
This was very helpful video thank you so much
Which one is this shower door model? When can I find it? It is exactly the replacement I need.
Listen to me carefully.. Please make sure you don't have electrical, plumbing, or HVAC running behind your walls...(I do this for a living and you would be surprised) Great video!
Is this video from the early 2000s? Great video either way.
Excellent video. Can't wait to do this.
Tyvm. Gave me what it takes to do myself 😊
Nicely explained i am planning to instal one myself
I came across this video because I was searching for bottom guide replacement part for my maax shower door inner door panel. Do you know what it looks like? I was hoping you would show in inner door panel installation as well
I see the outer door rides on a raised lip on the bottom. What keeps the bottom of the inner door in place so it doesn't swing into the shower?
From Chile , ¡ Super ! I subscribe to your channel , thanks you!😃
It would be helpful to explain if the shorter or longer side of the wall guides goes on the interior of the tub. Great to see a woman doing the install too. I would only suggest add in how to fix caulking issues if not enough caulk went on and she didn't include caulking at the base of the guides, which many manuals suggest.
Excellent instructional vid. TY
Great video easy to follow
She is a legend - imagine
Nice instructions!!
Great tutorial
I'm trying to remove the shower doors, cleaning some of these is a nightmare. I like shower curtains
Nothing like a handy woman nice on the eyes😍😍
Thanks! Would you recommend any llw cost cutting tools for this header/top track? Kohler customer service suggested hack saw or "miter" saw. Also, the outer plastic in my default roller wheels wore out, exposing the metal underneath, and damaged the header track after only 8 years of use. I switched it out with nylon plastic roller wheeler, I hope these wheels will last longer.
nice diy guide! please let us know the breakdown of material costs. thanks alot
What brand kit? I can't find one this simple😊
dam good vid way to go you got me on track now thanks
Why didn't you secure the header (top rail) to keep it from coming off?
So strange. I'm installing shower doors and have come up with the same dilemma. There's instructions in 2 different places and no mention of attaching the header to the wall channels the same as in this video. I'm thinking of at least adding silicone.
@@mmsabre7931 Sometimes the top is not secured because the weight of the glass doors is so heavy. But what if the doors are the flimsy type that weigh "5" pounds.
Silicone will hold definitely secure it in place in most cases and also prevent water from the top. Some installations suggests a very small set screw on the inside going through the header to the side rail. I geard some doors have "clips" that are used to secure the header but I haven't run across one like that yet. I only have a few rental properties.
One thing for sure, when kids are involved they will find a way to eff something up if it is not secured.
PS If both sides of the header are curved outward, the set screw option might not work.
@@gunsmoke7573 Thanks. I'm going to use a small set screw on the inside flat section.
Do they make plastic shower doors, I want to put one in for my apartment.
Im glad to see that somebody else uses way too much caulk and makes a mess like me
Very good my dear
Very nice work
Thank you much I’m going to try that on mine
Made it so easy! Thanks 🙏
You make it look so easy..👍
Do NOT use a hammer drill on tile. They can crack the tile and ruin it. There are drill bits made specifically for tile.
The only problem I see is that top rail is only weight secured and often times they come loose. Is there a way to secure the top rail that looks good?
What happens if a sliding door shader? I was taking a bath and I heard a crack and all the glass was on top of me, can I buy another door and call someone to install it or should I buy everything all over?
so, where did you purchase this hardwarde - the top rail, two side rails and the threshold!?
She can fix my house anyday and we can PARTY 😂 “diddy” voice