THANK YOU!!! The mulching chute safety switch isn't mentioned ANYWHERE in troubleshooting why the mower won't start. Knew it was something stupid, SO GLAD I FOUND YOUR VIDEO!!
Glad to help and your back up and running! Please give this video a like and tell your friends about my channel to help it grow! It would be greatly appreciated.
Thank you! I’m glad it was helpful, please give this video a thumbs up, subscribe and tell your friends to help my channel grow! It would be greatly appreciated:)
I'm glad it was helpful and thank you for the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated!
I'm glad it worked and your back up and running. Thank you for the kind comment. Please give this video a like and share my channel to help it grow! It would be greatly appreciated!
Thanks so much for the video! I was going through and testing all the wiring and had no idea that safety switch was even there. Saved me from having to take it somewhere or take it apart even more than I already had.
OMG thank you so much for the video. I knew it was something silly. I had removed the guard to clean and didn't notice. Put back the right way started right up. Thanks again 🤓
My hero. Thanks brother! I’m a big dummy with engines, big and small. I really appreciate your help on this. Fired right up when I took the mulch cover off and cleaned the crap out. Resecured it, snugged down the wing nuts, made sure the kill switch was engaged properly and bang. 👍
Sometimes it’s just the little things! Thank you for watching and the kind comment. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated.
I have this exact mower and that safety button is covered in the manual. My husband still hasn't figured it out yet. But I read the manual and I don't tell him, lol He comes in and says, "The damn thing won't start!" I'll go, really? Then I go out and start it for him after tightening that guard up against that safety button. OH it's sooooo much fun
I have been trying to figure out why my mower wouldn’t start after sharpening and reinstalling the blade. It has been a week. Boy was I glad I found your video. I whooped for joy (and then mowed the grass that was getting out of control). Thank you sir for all your help. ❤❤❤❤❤❤❤❤❤❤❤❤
I’m glad you were able to figure it out and your back up and running !! Please give this video a like and share my channel to help it grow. It would be greatly appreciated!
You saved my life!!! My wife was mowing (which she loves to do) and hit something. Mower went off. I could not figure out until I saw this. Fixed in 30 seconds. You are doing God’s work my friend.
You just saved me 3 hours of my life. Bought one of these used and immediately took the guard off. Then tucked around on it leveling, sharpen blades…. Then it wouldn’t start
Dude you literally just saved my ass, my tb30 rider wouldn’t start , checked battery,fuses, pressure switch under the seat tightened up mt deck lever, nothing worked. I watched your video and sure as shit it was the pressure switch on the chute, was about the call the mobile mechanic dude to come fix it. That mower I depend on for yards with a small gates , thank you
Hit a rock and my mower wouldn't start at all... watched this video and found that it was the sensor switch on the side discharge that came loose. That little button just had to be tightened with the mulching plastic. Thanks for the advice, you save me a couple hundred bucks!
Thank you.....that was it. Have only had my mower for a few weeks and just replaced the mulcher with the discharge shoot and the snesor was not compressed fully. Thanks so much.
Your video just saved me a whole lot of aggravation and money! That safety plug on the side guard was the main reason my mover was not starting . . . I owe you a couple of beers, Bro!
Hey Bobby, glad you back up and running! A beer is good but giving this video a thumbs up, subscribing and telling your friends about my channel would be greatly appreciated!! Thank you for the kind comment!
Not sure how much time you saved me, I should have looked at TH-cam first! That interlock didn't show up on my schematic and I hadn't even thought of me pulling the mulching cover off for a looky-see would have anything to do with the starter... :-) Thank you!
Glad you are back up and running! Thank you for commenting. Please give this video a like and share the channel with your friends to help it grow! It would be greatly appreciated.
Fantastic! Thanks so much, this was exactly our problem. A few hour's mowing ago we hit a buried rock that had exactly the right height and slope to bend the blade up and strike the metal skirt. It hit in just the right way to cut a slit and push up so that after a new blade, and some more mowing the mulching chute thing lifted up, releasing the safety switch! Your making this little video saved us a ton of time and aggravation -- much appreciated :D
Glad it helped! Something so simple but so hard to figure it out. I had to post it and it has helped soooooo many people . Thank you for the kind comment.
Instant follow. Have this machine, I hit a rock killed the mower wouldn’t restart. The mulch guard moved away from the safety switch. Love the video and thank you for saving me money!!!! Life and lawn saver lol 🎉🎉🎉
Are you kidding? Just finished mowing, went to restart & nothing! We've been troubleshooting the switches for over an hour and 2:00 minutes into your video we knew that was our problem! A minute later, the mower was running!! Thank you very much!!
Problem solved !!!!!- mine was the button thing under that Mulching cover...….Was about to get really mad because I just bought this machine today, so that means it can come with this problem right off the bat. Well done, thank you for the video.
Most satisfying thing is fixing my craftman r110 2019 with the exact same layout after a whole day of diagnosing and buying stuff i didn't need. Thank you!
Thank you, thank you, thank you!! I almost gave up and was going to call service, but thank God I found this video. As many times as I removed the mulch guard, I never encountered this problem, so it never would have occurred to me to check this. But sure enough, this was the issue!
I’m happy to hear your back in business!!! Thank you for the kind comment:) I new this video would help many people after I picked up a customers machine when they could not get the machine to run.
Hi Brad, Thank you so much for your trouble shooting ideas. Last night I charged the battery ,came inside and then watched your excellent video. After watching I knew it was the white safety push in button. I couldn't wait until morning . It was not the battery, it was that white button that was not engaged. The last cutting I did ,the grass was a bit too wet and was clogging up in the Shute. I unscrewed the bolts to remove the grass, and not knowing ,that is what happened. Thank you so much again .
I’m glad you figured it out with a little help! Please give this video a like, subscribe if you haven’t yet and share the channel with your friends to help it grow. It would be greatly appreciated!
Wooohoo! Fixed my issue. I hit a rock and the mower died, wouldn't even try to crank over. Safety switch popped out just like you showed, fired right up afterwards
Hi Chris, I’m glad it was simple fix. Thank you for commenting. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated.
Thank you for reminding me of that switch. I had forgotten about it, and it was indeed my problem. I had cleared a grass clog and forgot to check that switch afterward. Thank you!
Again thank you so much! Thats exactly what happened to me ! I checked the deck and it had moved cutting the mower off! Saved me hundreds of repair and they would have lied I'm sure and charged a ton to get it running!
I’m glad your back up and running! Thank you for the kind comment. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated.
That solved the problem I had when a branch struck and stuck on mulch guard switch which disable the ignition. I had the debris removed, and it worked like a charm. I saved lots of money and time by viewing this video. Thanks a bunch! Subscribed!
I'm not going to lie....I took the WHOLE thing apart. The damn pressure switch was the only problem. On a positive note, I know every inch of this thing. Thanks for the video 😊
I'm glad it worked!! and thank you for the kind words. Please give this video a like and share my channel to help it grow! It would be greatly appreciated!
Thank You, I was going out of my mind thinking after I rinsed it off I screwed something up. Wife put guard back on and your video showed the problem, went to tighten and it started up
I’m glad you figured it out ! Thank you fir watching, please give this video the thumbs up if you liked it, subscribe and tell your friends to help my channel grow;)
What a stupid safety feature. Thank you so much for fixing my problem I knew it was something silly. You just saved me several hours and probably 100 bucks.
I had to post this video so it could help many and it has!! I’m glad you came across it!! At least you did not give up and take it to a shop. Saved yourself some money:). Please give this video a like, and share my channel with your friends to help it grow. It would be greatly appreciated.
I’m glad this video was helpful! Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated:)
I’m glad you’re back up and running and thank you for the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated.
I’m glad you saw this before you had to take it somewhere!! . Please give this video a thumbs up subscribe and tell your friends about my channel to help it grow. It would be greatly appreciated. Thank you for watching and the kind comment:)
I had to make this video because I new it would be very helpful!! I’m glad your back up and running! Please give this video a like and tell your friends about my channel to help it grow. It would be greatly appreciated! Thank you for the kind comment:)
Pulled this mower out of the neighbors trash and had gone through the machine - top to bottom - completely aware of the other 4 safety stops, NEVER knew about this guard safety stop, installed the mulch cover correctly and the machine fired right up .... not bad for a free mower!
I’m glad it helped and you’re back up and running! Thank you for the kind comment. Please give this video a like and share my channel with your friends to help it grow. It would be greatly appreciated!
Sooooo coool of your explanation......I want one of those electric meter thingys... Can u pleeeze do a tutorial on the blade and engagement fully. ...I'm kinda nervous about which handle to drop first. Does it matter which one I move first. I just got the craftsman R110 in Nov and have driven it around my yard several times to get use to it. My son showed me how to use the blade and ut went well...but I still would like to see another explanation... Thank You so much !!!!! Julia in NC,,,,
Hi Pamela, I'm glad it was helpful and thank you for the kind comment. Please give this a like, subscribe and tell your friends about my channel to help it grow. It would be greatly appreciated. Thank you for watching!
The guard gets chewed up by those wingnuts (as I see yours has) and keeps popping off eventually. I created a 3d printable clip you can fit that eliminates that. I'll upload it somewhere and post a link.
Omfg thank you so much I’ve been here for an hour fucking around with this mower and then the safety switch was out thank you so much man you’ve made my day
I’m glad it was helpful and thank you for the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated.
I'm glad it was helpful and thank you for the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated. Thank you for watching.
Yes sir, exactly my problem , but the cowling, blade cover assembly is rusted and it can not longer hold the safety switch in position...machine still runs great good and all. Looking to replace the whole bottom blade cowling part now. Thank you for the video btw.
The home depot worked on it and said that it was working fine, (warranty work). However, once it was moved to the house the problem continued. Now I know why it won't start. Thank Q
❤ I LOVE YOU MAN ❤YOU SAVE ME FROM GETTING YELLED AT BY MY WIFE . I just fixed that damn thing and that happened to me while doing some else's yard & she said don't use my mower in there yard . 😅
I had to post it, knowing that many people would save a lot of money with such a simple issue! I’m glad you figured it out before it had to go into the shop :). Thank you for the kind comment.
Thanks, sometimes, it’s just the little things:). I’m glad it was helpful. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated.
Could you do a video on an easy way to install the battery, I thought that was my trouble until I heard about the safety switch from someone else that owns one, but I couldn't explain it to my son so your video has been really really helpful.
Your welcome, I’m glad it was helpful! Thank you for watching, please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated;)
I’m glad to hear your up and running! Thank you for watching, please give this the thumbs up, subscribe and tell your friends to help my channel grow:)
I have one of these and the parking brake no longer engages. Can you do a vid? It does brake, just when I go to put it in park, it won't engage. Thanks. Love your vids.
Those switches are a pain everytime you run the mulching port against a fence and the switch does that I put a cable tie around mine. Stays in permanently now
I’m glad you found this video!!!! and I’m glad you are up and running again. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow! It would be greatly appreciated:)
![[กูเพิ่งซื้อมึงปิดหนี] 20 นาที ผมรีวิวเกมที่แย่ที่สุดในโลก CONCORD](http://i.ytimg.com/vi/XhC-3q3Ii7I/mqdefault.jpg)
THANK YOU!!! The mulching chute safety switch isn't mentioned ANYWHERE in troubleshooting why the mower won't start. Knew it was something stupid, SO GLAD I FOUND YOUR VIDEO!!
Glad to help and your back up and running! Please give this video a like and tell your friends about my channel to help it grow! It would be greatly appreciated.
You just saved my life, short, precise, and very well explained, I give you an A +.
Thank you! I’m glad it was helpful, please give this video a thumbs up, subscribe and tell your friends to help my channel grow! It would be greatly appreciated:)
Thank you for your informative video. This was the precise problem that was keeping my mower from starting.
I'm glad it was helpful and thank you for the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated!
Woke today thinking to check this switch! Thank you!!!! Great video.
I'm glad it worked and your back up and running. Thank you for the kind comment. Please give this video a like and share my channel to help it grow! It would be greatly appreciated!
Thanks so much for the video! I was going through and testing all the wiring and had no idea that safety switch was even there. Saved me from having to take it somewhere or take it apart even more than I already had.
I’m glad you were able to figure it out:) Thanks for the kind comment.
OMG thank you so much for the video. I knew it was something silly. I had removed the guard to clean and didn't notice. Put back the right way started right up. Thanks again 🤓
If Battery terminals are tight & fuse ok! 90% of time it's the guard switch out of position! Great Helpful Video! Thanks
My hero. Thanks brother! I’m a big dummy with engines, big and small. I really appreciate your help on this. Fired right up when I took the mulch cover off and cleaned the crap out. Resecured it, snugged down the wing nuts, made sure the kill switch was engaged properly and bang. 👍
Sometimes it’s just the little things! Thank you for watching and the kind comment. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated.
I have this exact mower and that safety button is covered in the manual. My husband still hasn't figured it out yet. But I read the manual and I don't tell him, lol He comes in and says, "The damn thing won't start!" I'll go, really? Then I go out and start it for him after tightening that guard up against that safety button. OH it's sooooo much fun
Nice!!! LOL
Super happy I stumbled across this video. Been fighting this issue for a day or so now. Had no clue there was a safety there. Thank you sir.
Glad it helped
Learned alot! Doesn't resolve my problem but never knew about the emergency brake! Thank you!
Thank You!!! Hit a branch and couldn't figure out why it wouldn't start!! That was it.
I'm glad it was helpful. Thank you for sharing and the kind comment.
I have been trying to figure out why my mower wouldn’t start after sharpening and reinstalling the blade. It has been a week. Boy was I glad I found your video. I whooped for joy (and then mowed the grass that was getting out of control). Thank you sir for all your help. ❤❤❤❤❤❤❤❤❤❤❤❤
I’m glad you were able to figure it out and your back up and running !! Please give this video a like and share my channel to help it grow. It would be greatly appreciated!
Dude....you are my hero ! you just fixed my mower which has been giving me headaches for 2 years ! Thank You
I’m glad this helped you! Sometimes it something simple!
Let me add on that a year later, you saved me from pushing a mower to finish my large yard.. At my age ... 67 ... that's a chore. Thank you!
copy that brother!!!
You saved my life!!! My wife was mowing (which she loves to do) and hit something. Mower went off. I could not figure out until I saw this. Fixed in 30 seconds. You are doing God’s work my friend.
Hi Bobby, I'm glad this video helped you and thank you for the kind words.
You just saved me 3 hours of my life. Bought one of these used and immediately took the guard off. Then tucked around on it leveling, sharpen blades…. Then it wouldn’t start
Johnson's Small Engine's channel is a great one and to the point.
Dude you literally just saved my ass, my tb30 rider wouldn’t start , checked battery,fuses, pressure switch under the seat tightened up mt deck lever, nothing worked. I watched your video and sure as shit it was the pressure switch on the chute, was about the call the mobile mechanic dude to come fix it. That mower I depend on for yards with a small gates , thank you
Nice! Thanks for sharing and kind comment. Please share my channel to help it grow. It would be greatly appreciated!
Hit a rock and my mower wouldn't start at all... watched this video and found that it was the sensor switch on the side discharge that came loose. That little button just had to be tightened with the mulching plastic. Thanks for the advice, you save me a couple hundred bucks!
I’m glad it was helpful!
Thank you.....that was it. Have only had my mower for a few weeks and just replaced the mulcher with the discharge shoot and the snesor was not compressed fully. Thanks so much.
I’m glad it was helpful and your back up and running:)
Your video just saved me a whole lot of aggravation and money! That safety plug on the side guard was the main reason my mover was not starting . . . I owe you a couple of beers, Bro!
Hey Bobby, glad you back up and running! A beer is good but giving this video a thumbs up, subscribing and telling your friends about my channel would be greatly appreciated!! Thank you for the kind comment!
Not sure how much time you saved me, I should have looked at TH-cam first!
That interlock didn't show up on my schematic and I hadn't even thought of me pulling the mulching cover off for a looky-see would have anything to do with the starter... :-)
Thank you!
Glad you are back up and running! Thank you for commenting. Please give this video a like and share the channel with your friends to help it grow! It would be greatly appreciated.
Fantastic! Thanks so much, this was exactly our problem. A few hour's mowing ago we hit a buried rock that had exactly the right height and slope to bend the blade up and strike the metal skirt. It hit in just the right way to cut a slit and push up so that after a new blade, and some more mowing the mulching chute thing lifted up, releasing the safety switch! Your making this little video saved us a ton of time and aggravation -- much appreciated :D
Glad it helped! Something so simple but so hard to figure it out. I had to post it and it has helped soooooo many people . Thank you for the kind comment.
Instant follow. Have this machine, I hit a rock killed the mower wouldn’t restart. The mulch guard moved away from the safety switch. Love the video and thank you for saving me money!!!! Life and lawn saver lol 🎉🎉🎉
I'm glad to hear your are back up and running! Thank you for the kind comment and supporting the channel!
Thanks so much! I was unaware of that switch! Bought used no book!
Are you kidding? Just finished mowing, went to restart & nothing! We've been troubleshooting the switches for over an hour and 2:00 minutes into your video we knew that was our problem! A minute later, the mower was running!! Thank you very much!!
I’m glad you were able to figure it out!
Problem solved !!!!!- mine was the button thing under that Mulching cover...….Was about to get really mad because I just bought this machine today, so that means it can come with this problem right off the bat. Well done, thank you for the video.
I’m glad I it was helpful!
Most satisfying thing is fixing my craftman r110 2019 with the exact same layout after a whole day of diagnosing and buying stuff i didn't need. Thank you!
I’m glAd it was helpful. Thank you for watching and commenting.
Thank you, thank you, thank you!! I almost gave up and was going to call service, but thank God I found this video. As many times as I removed the mulch guard, I never encountered this problem, so it never would have occurred to me to check this. But sure enough, this was the issue!
I’m happy to hear your back in business!!! Thank you for the kind comment:) I new this video would help many people after I picked up a customers machine when they could not get the machine to run.
Hi Brad, Thank you so much for your trouble shooting ideas. Last night I charged the battery ,came inside and then watched your excellent video. After watching I knew it was the white safety push in button. I couldn't wait until morning . It was not the battery, it was that white button that was not engaged. The last cutting I did ,the grass was a bit too wet and was clogging up in the Shute. I unscrewed the bolts to remove the grass, and not knowing ,that is what happened. Thank you so much again .
I’m glad you figured it out with a little help! Please give this video a like, subscribe if you haven’t yet and share the channel with your friends to help it grow. It would be greatly appreciated!
Thank you so much. I knocked the cover and it came off the white safety switch. It finally starts.
Glad it helped!
Appreciate this video. Got my mower running . This was the actual reason as to why my mower wasn’t running.👍
I’m glad it was helpful and thank you for the kind comment.
Wooohoo! Fixed my issue. I hit a rock and the mower died, wouldn't even try to crank over. Safety switch popped out just like you showed, fired right up afterwards
Hi Chris, I’m glad it was simple fix. Thank you for commenting. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated.
Thank you for reminding me of that switch. I had forgotten about it, and it was indeed my problem. I had cleared a grass clog and forgot to check that switch afterward. Thank you!
Glad it helped!
Again thank you so much! Thats exactly what happened to me ! I checked the deck and it had moved cutting the mower off! Saved me hundreds of repair and they would have lied I'm sure and charged a ton to get it running!
I’m glad your back up and running! Thank you for the kind comment. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated.
Thanks so much, I had the exact same issue. I sent 2 hours testing switches etc. Had me going in 15 minutes
I’m glad it was helpful and your back up and running! Please give this video a like to help the channel. It would be greatly appreciated!
That solved the problem I had when a branch struck and stuck on mulch guard switch which disable the ignition. I had the debris removed, and it worked like a charm. I saved lots of money and time by viewing this video.
Thanks a bunch!
Subscribed!
I’m glad it worked for you. Thank you for the kind words and for supporting my channel. It is greatly appreciated:)
Only video I've seen that talks about that switch. Thank you
I hope it helped get your mower operating again! Thank you for the kind comment.
Thanks for showing this safety. I knew before but it's been a while and couldn't remember it. I didn't have button touching plastic
I’m glad you’re back up and running!
@@JohnsonsSmallEngines
I was now it's just clicking not trying to turn over.
I really hadn't took the time to try and diagnose the problem yet.
I'm not going to lie....I took the WHOLE thing apart. The damn pressure switch was the only problem. On a positive note, I know every inch of this thing. Thanks for the video 😊
I’m glad you were able to figure it out:)
Wow safety switch. I would have never figured that one out. This actually fixed my mower. Thanks for the input
I'm glad it worked!! and thank you for the kind words. Please give this video a like and share my channel to help it grow! It would be greatly appreciated!
Saved me a trip to have the mower serviced. I inadvertently reversed the battery pack when jumping the battery and blew the fuse.
Glad it all worked out! Thanks for watching and commenting:)
That’s the exact condition I had, I removed that cover to clean it and the switch got disengaged.
Thank you so much!
Glad it helped and your back up and cutting!
Thank You, I was going out of my mind thinking after I rinsed it off I screwed something up. Wife put guard back on and your video showed the problem, went to tighten and it started up
I’m glad you figured it out ! Thank you fir watching, please give this video the thumbs up if you liked it, subscribe and tell your friends to help my channel grow;)
What a stupid safety feature. Thank you so much for fixing my problem I knew it was something silly. You just saved me several hours and probably 100 bucks.
I’m glad your back up and running!! Sometimes it’s the simple things:)
Friend, I spent days charging battery testing fuses etc and your video showing the switch on the mulch cover it was fixed. Thank you
I had to post this video so it could help many and it has!! I’m glad you came across it!! At least you did not give up and take it to a shop. Saved yourself some money:). Please give this video a like, and share my channel with your friends to help it grow. It would be greatly appreciated.
Thank you So much! This was my problem! An oversight on my part. Again, thank you for the great video!!
I had to post that because it is so overlooked and so simple of a issue to make it not start. I’m glad you back up and running!
Your actually saved my life I was cutting grass did it 3 times was not aware there is a kill switch saved me ! Thought i Broke it
I’m glad this video was helpful! Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated:)
This video just saved me a bunch of time, effort, and money. Thank you.
I’m glad you’re back up and running and thank you for the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated.
Thank you so much it was the safety. You saved me a bunch of $$$ for repair shop. I love you tube
I’m glad it was helpful and thank you for the kind comment:)
Thank you very much. Was about to call Mr. Fix everything. Added an extra washer to keep the chute in place.
I’m glad you saw this before you had to take it somewhere!! . Please give this video a thumbs up subscribe and tell your friends about my channel to help it grow. It would be greatly appreciated. Thank you for watching and the kind comment:)
Thank you so much for your video! I knew everything you covered and was ACTUALLY looking for how to tune up ,but your video was great !
I’m glad it was helpful :)
Joining all thankful pals here, fixed it fast, thank you!
Sometimes it just the simple things:) please give this video a like to help the channel. It would be greatly appreciated.
Omg , thank you , I forgot about that switch and I've seen it before ! Lol . Thank you sooooo much sir ! You saved me much trouble .
I had to make this video because I new it would be very helpful!! I’m glad your back up and running! Please give this video a like and tell your friends about my channel to help it grow. It would be greatly appreciated! Thank you for the kind comment:)
U just helped me a lot.. i didn't know what was going on. Thank you so very much 💯
I’m glad your back up and running!
My safety switch is in like your video. Safety switch for blade engagement and seat switch are engaged. Still will not crank. Battery is good.
Check the fuse. Check to make sure your blade engagement handle is all the way off? Check emergency brake switch.
great video, I'm going to check my mower as soon as I get home to see if that was the problem 😀 battery was good.
Pulled this mower out of the neighbors trash and had gone through the machine - top to bottom - completely aware of the other 4 safety stops, NEVER knew about this guard safety stop, installed the mulch cover correctly and the machine fired right up .... not bad for a free mower!
Nice!!
Thank you so much, I just saved $70 for your kind information.
Glad I could help!
you are my hero. it was barely not touching the trigger
I’m glad you’re back up and running!
Thank you. Didn’t know about the safety switch on the guard
Hi Doris, Your very welcome, I'm glad it helped you and thank you for the kind comment.
Thank you so much for this video!!! The tip about the switch on the side was my problem.
I’m glad it helped and you’re back up and running! Thank you for the kind comment. Please give this video a like and share my channel with your friends to help it grow. It would be greatly appreciated!
Thanks man. That hidden kill switch on the Mulcher was driving my dad nuts.
I’m glad it was helpful and your dad is back up and running!
Sooooo coool of your explanation......I want one of those electric meter thingys...
Can u pleeeze do a tutorial on the blade and engagement fully. ...I'm kinda nervous about which handle to drop first.
Does it matter which one I move first. I just got the craftsman R110 in Nov and have driven it around my yard several times to get use to it. My son showed me how to use the blade and ut went well...but I still would like to see another explanation...
Thank You so much !!!!!
Julia in NC,,,,
You saved me. My hats off to you. Thank you for your video.
I’m glad it was helpful and thank you for the kind comment!
Thank you so much. This was my exact problem. Saved me lots of money. Thank you so much
Hi Pamela, I'm glad it was helpful and thank you for the kind comment. Please give this a like, subscribe and tell your friends about my channel to help it grow. It would be greatly appreciated. Thank you for watching!
The guard gets chewed up by those wingnuts (as I see yours has) and keeps popping off eventually. I created a 3d printable clip you can fit that eliminates that. I'll upload it somewhere and post a link.
U saved my a$$ with this one...safety switch..thank u so much...gained yourself a new subscriber.
I’m glad it was helpful and thank you for supporting my channel!
The exact problem, what a goofy thing for it to be. Thank you very much!
I know, right:)
Omfg thank you so much I’ve been here for an hour fucking around with this mower and then the safety switch was out thank you so much man you’ve made my day
I’m glad it was helpful and thank you for the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated.
Thank you very much! did not know about the kill switch but now I do! And I also know where the fuse is on positive cable is also.
I'm glad it was helpful and thank you for the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated. Thank you for watching.
Yes sir, exactly my problem , but the cowling, blade cover assembly is rusted and it can not longer hold the safety switch in position...machine still runs great good and all. Looking to replace the whole bottom blade cowling part now. Thank you for the video btw.
I’m glad it was helpful:)
The home depot worked on it and said that it was working fine, (warranty work). However, once it was moved to the house the problem continued. Now I know why it won't start. Thank Q
I’m glad it was helpful!
Thank you my friend just tried it on my mower and it runs .
Glad to hear!
Excellent, extremely informative, outstanding video. I’ll try this procedure tomorrow. Thank you. 👍🏻😉🙏🏻✝️🇺🇸
I’m glad it was helpful and thank you for the kind words.
❤ I LOVE YOU MAN ❤YOU SAVE ME FROM GETTING YELLED AT BY MY WIFE . I just fixed that damn thing and that happened to me while doing some else's yard & she said don't use my mower in there yard . 😅
Nice! Glad to hear you repaired and didn't get in trouble!!
my mower did this same thing .this video saved me alot of work and time . Thank you for making this video . i subbed and liked . 🇺🇲☝
Hi Eugene, I’m glad it was helpful and thank you for supporting my channel.
Thank you my friend that is exactly what was wrong God bless you
I had to post it, knowing that many people would save a lot of money with such a simple issue! I’m glad you figured it out before it had to go into the shop :). Thank you for the kind comment.
Saved me a headache looking for the solution. Great Video
Thanks, sometimes, it’s just the little things:). I’m glad it was helpful. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated.
Thanks man that was exactly what was wrong with mind and I watched your video fixed my mower in 30 seconds your video was so helpful thank you so much
I’m glad you are back up and running:) sometimes it’s the simple things that we miss. Exactly why i made this video. Thank you for the kind words.
Thank you your video
It helped me to find the problem on my mover
I’m glad it was helpful!
You have become My go to Guy....... Thanks
Thanks for the support, I will do my best to help!
Could you do a video on an easy way to install the battery, I thought that was my trouble until I heard about the safety switch from someone else that owns one, but I couldn't explain it to my son so your video has been really really helpful.
I will put it on the list to make a video on how to install the battery but at the moment I do not have that machine in the shop.
Thanks so much! The kill switch was the problem!
I'm glad you were able to get mowing again! Thank you for the kind comment :)
Thank you, Thank you, Thank you! Our mulch guard was causing the problem!!! 😊
I’m glad it was helpful:)
Very helpful! Learn something new everyday. I really appreciate it.
Bro... That cowling safety switch. Thanks a lot.
Your welcome, I’m glad it was helpful! Thank you for watching, please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated;)
Great video!! Saved me lots of time! Thanks
I'm glad your back up and running!
My problem too! Awesome... didn't even know it was there.
I’m glad to hear your up and running! Thank you for watching, please give this the thumbs up, subscribe and tell your friends to help my channel grow:)
Wow thanks so much I knew it was one of them damn safety switched because my problem occurred after the mower flipped sideways.
I’m glad it helped you!
Thanks dude you saved me big time
I'm glad this video was helpful. Thank you for the kind comment. Please give this a like to help the channel.
This video just helped me. And yes. It was that switch!!! Thanks you for posting
Glad your back up and running:)
This vid just save me a couple hundred bucks thanks
I'm glad it did!!! Thank you for the kind comment and for subscribing :)
A million thanks to you! You saved me! 🙏🏻🙏🏻🙏🏻🙏🏻
Hi Tracy, I’m glad this was helpful:)
I have one of these and the parking brake no longer engages. Can you do a vid? It does brake, just when I go to put it in park, it won't engage. Thanks. Love your vids.
I’ll need to have one come into the shop to be able to look at the brakes but I will put it on the list to do.
Thank you. I bet that is my problem because it was running until I turned it off to give her a clean in the chute area.
this fixed my mower, thank you!
Great to hear!
Those switches are a pain everytime you run the mulching port against a fence and the switch does that
I put a cable tie around mine.
Stays in permanently now
Just did what he said. And my lawn mower started. Thks man.
Thanks. I hit a rock and it moved the bagging linkage just enough to open that switch. I was about to take it to the shop for no crank.
I’m glad you found this video!!!! and I’m glad you are up and running again. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow! It would be greatly appreciated:)
Thanks! That guard safety switch was it!
I'm glad it was helpful and thank you for commenting. Please give this video a thumbs up to help my channel. It would be greatly appreciated!