Omg your soo amazing I was having problems with draining and spinning and this video helped out a lot. I was so stressed that I would have to get another washer. I have had this washer for 3 years and I love it. There was 2 pennies and a hair pin with some lint. I never knew about this but it's now drained. Thank you soo much. I love youtube University. 😊
Hello. Thank you so much for the editorial I was having a problem with my Magic Chef draining and I would freak out and wonder what was going on and I would move the the the drainage up and down till it drained but luckily I found you solve the problem was and I had a quarter and a penny in the drainage also a little bit of drain a little bit of lint and I've had it two years so as I said again thank you thank you thank you so much😊👌
The rubber ring on the drain filter on the back bottom has cracked and water leaks on the floor. Can that be replaced? I'm on the 3rd floor. I do not want issues with my neighbors downstairs.
Mine is intact, but is leaking for me as well, and I see other comments on here that are saying the exact same thing! I’ve been googling for months, every possible wording to try to find the replacement for the gasket were all having leaking on our floors, but I haven’t been able to find ANYTHING! For this being such a common problem, this part needs to be easily found and ordered online FOR CHEAP TOO!
My lid is on but E2 error comes and sometimes it’ll start and complete a wash but then it’ll start and stop ; how do I repair this ? Magic chef 0.9 Cu. Ft. Portable Washer
Hello. I think I can help you. Sometimes mines do that and it could be the Lent so you pull the washer out and check that. If not then mines do that when it's uneven so try to put it on a flat more flat surface cuz you may think it's even but it's probably uneven somewhere
My faucet leaks when I use my washer. I’m no plumber but I know a thing or two about connecting washers. The male quick connect has teflon tape and a gasket, is it possible there is something wrong with the faucet? Please help.
After removing the nut, if the wash plate will not move try to gently flex it up and down from the outer edge. You can also gently tap on the center shaft with a small hammer and wooden dowel, careful to not damage the threads on the shaft.
When i lifted up my lid today it made a weird noise a plastic part flew out onto the floor. Would having the portable washing on a dolly with part of the front on both sides hanging off the dolly cause this? It really shakes so much sometimes tht the washing machine .moves away from orgional postion. I bought the portable dolly so i could move it to the sink easly. Could the machine shaking so much cause the part that open the lid break off ..i noticed their was a much bigger gap on the right side.
Hello. There are special levelers that will allow you to level the unit by attaching the leveler to the front panel and also the back panel. I recommend using a leveler that has a built in magnet to make it easier.
@@qkcam45 there is no specific name to it. Just called a leveler but it will state if it has a built in magnet and will have more than 1 way to check leveling. You can purchase it at your local hardware store.
Omg your soo amazing I was having problems with draining and spinning and this video helped out a lot. I was so stressed that I would have to get another washer. I have had this washer for 3 years and I love it. There was 2 pennies and a hair pin with some lint. I never knew about this but it's now drained. Thank you soo much. I love youtube University. 😊
Hello. Thank you so much for the editorial I was having a problem with my Magic Chef draining and I would freak out and wonder what was going on and I would move the the the drainage up and down till it drained but luckily I found you solve the problem was and I had a quarter and a penny in the drainage also a little bit of drain a little bit of lint and I've had it two years so as I said again thank you thank you thank you so much😊👌
Happy to hear the video was of great help. :) If you ever have any questions, call our customer support line, 888-775-0202.
The rubber ring on the drain filter on the back bottom has cracked and water leaks on the floor. Can that be replaced? I'm on the 3rd floor. I do not want issues with my neighbors downstairs.
Please contact our office at 888-775-0202.
Thank you
Mine is intact, but is leaking for me as well, and I see other comments on here that are saying the exact same thing! I’ve been googling for months, every possible wording to try to find the replacement for the gasket were all having leaking on our floors, but I haven’t been able to find ANYTHING! For this being such a common problem, this part needs to be easily found and ordered online FOR CHEAP TOO!
Where can i get the top rubber that goes to the filter. It's old and its leaking water from the bottom.
0:32 The audio for this video has disappeared with the marking of the split between the first two segments
Thank you for the comment, not sure why that is happening. Just reviewed the video at the time stamp you mentioned and seems the audio is fine.
Hi I have this portable washer but it’s not turning on anymore any suggestions? It was working fine yesterday but today won’t turn on
do you have a video showing h9w to tighten ths drum on the portable washer?
I broke my washer HLXN-008A07 Filter Plug, and need to replace it.
My lid is on but E2 error comes and sometimes it’ll start and complete a wash but then it’ll start and stop ; how do I repair this ?
Magic chef 0.9 Cu. Ft. Portable Washer
Hello. I think I can help you. Sometimes mines do that and it could be the Lent so you pull the washer out and check that. If not then mines do that when it's uneven so try to put it on a flat more flat surface cuz you may think it's even but it's probably uneven somewhere
I am need a new filter/plug - not sure where or how to order it for washer/dryer combo magic chef mcscwd27w5 --- can someone assist
My faucet leaks when I use my washer. I’m no plumber but I know a thing or two about connecting washers. The male quick connect has teflon tape and a gasket, is it possible there is something wrong with the faucet?
Please help.
Hello, would you happen to know how I can remove a bra wire from the magic chef?
My machine doesn’t drain. What can I do to fix this problem?
My machine is really loud on the spin cycle even after leveling. I have the 2.0 portable washer.
based off that, sounds like something may be wrong with the clutch assembly. I highly advise getting a tech to look at the unit to confirm.
What good are front leveling feet if it's out of level at the rear?
Chunk of cardboard worked for me ;)
Right?! My floor is sloping back and I have to tip the washer even FURTHER in order to have it stable because only the front feet adjust!
For the inside wash basin, mines stuck after unscrewing it. Is there an easy way to pull it out? We’ve tried everything to get it to lift out
After removing the nut, if the wash plate will not move try to gently flex it up and down from the outer edge. You can also gently tap on the center shaft with a small hammer and wooden dowel, careful to not damage the threads on the shaft.
What direction does the screw come out of the wash basket?
Basket tub*
Counterclockwise. (Left)
When i lifted up my lid today it made a weird noise a plastic part flew out onto the floor. Would having the portable washing on a dolly with part of the front on both sides hanging off the dolly cause this? It really shakes so much sometimes tht the washing machine .moves away from orgional postion. I bought the portable dolly so i could move it to the sink easly. Could the machine shaking so much cause the part that open the lid break off ..i noticed their was a much bigger gap on the right side.
It is a little less than 10 months I have had it. Received it sometime in Sept
Sept. 2022
Hi my machine doesn’t drain I clean the all filters but not able no open the inside tub spiner after open the one screw
Thank you. Can you hear the drain pump running?
Mine won’t agitate when clothes are in it
Please contact our office at 888-775-0202. Thank you
How can we buy a new lint filter? I couldn't find it on Amazon
Head over to our website mcappliance.com and select parts order. You can put in your model # and the list of parts will appear for your specific model
What f8 error code means
Can’t hear you
How do I level it from front to back since the lid is it not a flat surface?
Hello. There are special levelers that will allow you to level the unit by attaching the leveler to the front panel and also the back panel. I recommend using a leveler that has a built in magnet to make it easier.
Thanks for quick reply! Do those levelers work also to level front to back? What is the name of this type of leveler? Thanks again!!
@@qkcam45 there is no specific name to it. Just called a leveler but it will state if it has a built in magnet and will have more than 1 way to check leveling. You can purchase it at your local hardware store.