Much love. I am planning to buy one of this saw. I love wood working much. I have MS720 with 36" Alaskan mill and bar, also MS170. I does milling with MS720 and firewood or small tree freehand ripping with MS170.
I milled a few 16-18 in logs with my 455 rancher until I upgraded to a Husky 372XP use a 28in bar its a beast and still able to use it to buck and fell trees not to big. Wanted a 462 but couldnt find one.
For my tree company we rarely run the 088. It runs a 47" bar . I have the r version . Which is the western full wrap version. Sure helps when felling . They are pretty slow stock. I juiced mine up with a major port job and carb work and muffler. We run all 3/8 chains on all the big saws including this one. It sure helps in the cut with a lighter chain and more power after ending work. Days i need to use the 088 i dread it. With the 47 its around 55 pounds. Only bring it if need be. 660 and 362 . 200t climber do most of our removals .
I just seen the 881 at a local Sithl dealer and thought "Man, that is a BIG saw" but 55 pounds? ummm I'll deal with the 70 cc class and make it work lol
@@clevernamehere7559 Lol yeah I understand, if all it is doing is ripping that's okay right? Just my stubborn ass would want to hump it through the woods at times lol
@chainsawjenna With 32 years experience , logging, trimming and removal, and Firewood :) That saw is WAY MORE DANGEROUS than it is heavy, and it does not care.
Hey Jenna 😊 I bought a husqvarna 592xp with 24“& 36“ bar in June this year. I’m so happy with this saw. I’m enjoying your happiness about your new saw 😅 greetings Robin from Germany 🇩🇪
My big saw is an MS 650. I had it ported and polished up by St. Mary's. I bought it with a 32" bar for a Granberg. I then got a 42"bar for using all of my 36" mill ass you lose a lot on avoiding the nose sprocket. After that, I got a 24" bar for firewood. Anything smaller than 3 or 4 inches it just throws at you and I didn't want to be holding stuff with my foot beside that chain. I did try carving with the 32" bar and discovered wicked kickback even with a semi chisel chain.
I think it was Dave's Saw Shop, if memory serves that did the work. As for the mill, look on TH-cam and put a winch on it. The milling goes easier and more evenly. I built a replacement for my mill and spent 50 bucks to build one when I should have adapted one
@@michaelsnell4034 also get a bunch of 6" wedges... as you cut, stick the wedges in behind the bar to keep the slab from pinching the bar... youll also want a ripping chain which uses a 10 degree top plate vs a 30... not a requirement but it leaves a much nicer surface finish and will last longer
Jenna, I just came across your channel. I'm a huge fan of chainsaws, axes and forestry. I love my Husqvarna saws but appreciate any brand. I've ran the top three companies, Stihl, Husqvarna and Echo. I love to limb and buck storm debris, dead trees, etc. My best friend is a wonderful artist, carpenter and gradually got into chainsaw carving. I'm going to tell him about you channel. We live in upstate NY. I live in the southern Adirondacks and he lives two and a half hours north near Saranac Lake. He carves wolves, eagles, the Grateful Dead bears and even did a life like tall carving of big foot for one of his neighbors. Could you run that 881 and buck some logs, I would greatly appreciate it. I just purchased a new Husqvarna 365 71cc. That's my biggest saw and all, I need. God bless you and stay safe.
I thought my 500i was a big mean saw until I got this one 🤣Its great on the mill though running a 48" bar. Hardwoods are the dominant tree I work with, so I'm happy with as much power and torque I can get
Now you have a whole new set up with 404 chain, bar and sprocket. Buy replacement chain and sprocket now. Is the chain round ground square tooth? Square ground chain takes a very expensive grinder or lots of experience sharpening with a special file. Should be a lot of fun either way.
quel magnifique machine, que de belles courbe, et une puissance inouïe... la machine bien sûr soyons d'accord 😅😂😂😂😂. bonne journée à vous, amusez vous bien avec votre nouvelle machine
You're right, was hoping to see you start it. It may be more than a big girls saw, this saw is a handful for most men, and requires due respect for safety reasons.
ha, I got a Stihn vintage 90 power head with 47" bar. i could do 8 cookie cuts log 45" dia. and tired. had fill oiler after 2 cuts. told 13hp motor. I could not stop chain, slower speed but tons of torque. You be careful, that a handful of power !
I want to buy a Stihl backpack blower and i want it to come in a box just like you have in this video unboxing, can you help me out, please? I went to a local ace and they sell it assembled already with all sales are final they wont sell me it unassembled inside its original box and if it's used no returns accepted.
There are some You Tube videos of some guys from Indonesia climbing huge trees barefooted, cutting on the ground, etc. They have no safety equipment and use the Stihl MS881 and a giant Husqvarna to cut down/cut up HUGE trees. No problem.
Die MS 881 ist eine brauchbare Säge, vorallem wenn die Schneidegarnitur mit 160 cm Arbeitsbreite verbaut ist. Aufgrund der Leistung und dem Einsatzgewicht ist die Säge etwas gewöhnungsbedürftig.
Even for milling I wouldn't go any bigger than a 661 stihl or 395/592 husqvarna and 3/8 chain 404 is to much and will make you saw work to hard but that's just me lol
I surehope this does not become a doot stop. These big saws are brutal to start because off cc and design of the motor.. A 661 with a 2 foot bar would be a easier saws to learn milling then running a monster saw.
IMO a ported ripsaw 661 is WAY more reliable than an 881. An 881 is good for milling, but Jesus Christ almighty is it hard to start. Even with the decomp valve!
Hey kiddo that's a big saw ya got there girl. Let me start this off by saying that your cute as a pink button. And do you really think you can handle that monster saw? That's not just any saw kiddo. That's the biggest and most powerful chainsaw on the planet. It has 10 and a half horse and can handle a forty inch bar. So all I got to say is good luck in using that thing. And be carefull with that thing. And most of all don't cut your leg off with it.
Daaaaaaaaaaaaam girl, that chainsaw is bigger than you are. 🤣🤣🤣🤣 At least you have good taste in chainsaws because as we all know, STIHL RUNS THE YARD. 😊👍🏿 #stihlpower #stihlisyourdaddy #stihlrunstheyard
![BOWKYLION - เจ้านายคะ (work-life imbalance) [Official MV]](http://i.ytimg.com/vi/6bFj8G2pOi4/mqdefault.jpg)
Its exciting to open. She reminds me of my grandchildren at Christmas. Makes me smile.
I bought my 880 back in 2013. It's an absolute beast! I love watching your vids with your shiny brand new 881! ;)
I love your enthusiasm! Love your smiles! That is a big machine! Just found you today. You are fascinating to watch!
Awesome saw. It will handle the 36" bar no problem. I love the how you used the scrench as your box cutter. haha
Amazing! I’m a big fan of the 881! Looking forward to the next vid 👍🏼
Yesss I’m so pumped! 💪😁
I was just up getting a new chain.I checked one out, they are massive.Can't wait to see it milling.
It’s unbelievable until you see it in person lol
Can't wait to see it in action!
Much love. I am planning to buy one of this saw. I love wood working much. I have MS720 with 36" Alaskan mill and bar, also MS170. I does milling with MS720 and firewood or small tree freehand ripping with MS170.
oh very nice! awesome saws!!
why not mill with the 170 haha
Nice love your saw i do have a stihl ms 381 and it is quite sumtin that ms 881 is a beast hope you have fun.
I milled a few 16-18 in logs with my 455 rancher until I upgraded to a Husky 372XP use a 28in bar its a beast and still able to use it to buck and fell trees not to big. Wanted a 462 but couldnt find one.
Love the new detailing saw
It’s so beautiful!😍
For my tree company we rarely run the 088. It runs a 47" bar . I have the r version . Which is the western full wrap version. Sure helps when felling . They are pretty slow stock. I juiced mine up with a major port job and carb work and muffler. We run all 3/8 chains on all the big saws including this one. It sure helps in the cut with a lighter chain and more power after ending work. Days i need to use the 088 i dread it. With the 47 its around 55 pounds. Only bring it if need be. 660 and 362 . 200t climber do most of our removals .
I just seen the 881 at a local Sithl dealer and thought "Man, that is a BIG saw"
but 55 pounds? ummm I'll deal with the 70 cc class and make it work lol
@@drd1924 The saw drags a five foot long bar and chain, it can weigh whatever the fuck it’s gotta weigh. 😂
@@clevernamehere7559 Lol yeah I understand, if all it is doing is ripping that's okay right? Just my stubborn ass would want to hump it through the woods at times lol
Crazy beast chain saw, looking forward to see it running ! Looks so heavy
Lol it is so heavy! 😂😂
@chainsawjenna With 32 years experience , logging, trimming and removal, and Firewood :) That saw is WAY MORE DANGEROUS than it is heavy, and it does not care.
Looking forward to seeing you run it the next one! I'd love an 881 to run against some of the saws on my channel!
They are ridiculous powerful😂😂
Hey Jenna 😊 I bought a husqvarna 592xp with 24“& 36“ bar in June this year. I’m so happy with this saw. I’m enjoying your happiness about your new saw 😅 greetings Robin from Germany 🇩🇪
Hi Robin! Nice saw!! I don’t have any husqvarna saws yet. Great brand! Rip up that wood friend! Thanks for watching!😁😁
@@chainsawjenna ❤️❤️❤️ thank you and take care 😍
The MS 881 is my kind of saw love it😊😊😊😊
I was really captivated by her eyes, I didn't know what ethnicity she belonged to
My big saw is an MS 650. I had it ported and polished up by St. Mary's. I bought it with a 32" bar for a Granberg. I then got a 42"bar for using all of my 36" mill ass you lose a lot on avoiding the nose sprocket. After that, I got a 24" bar for firewood. Anything smaller than 3 or 4 inches it just throws at you and I didn't want to be holding stuff with my foot beside that chain. I did try carving with the 32" bar and discovered wicked kickback even with a semi chisel chain.
Jeepers! Thank you for sharing! Excited to try this saw in a save environment.😁 any tips are welcome!
I think it was Dave's Saw Shop, if memory serves that did the work. As for the mill, look on TH-cam and put a winch on it. The milling goes easier and more evenly. I built a replacement for my mill and spent 50 bucks to build one when I should have adapted one
@@michaelsnell4034 also get a bunch of 6" wedges... as you cut, stick the wedges in behind the bar to keep the slab from pinching the bar... youll also want a ripping chain which uses a 10 degree top plate vs a 30... not a requirement but it leaves a much nicer surface finish and will last longer
Jenna, I just came across your channel. I'm a huge fan of chainsaws, axes and forestry. I love my Husqvarna saws but appreciate any brand. I've ran the top three companies, Stihl, Husqvarna and Echo. I love to limb and buck storm debris, dead trees, etc. My best friend is a wonderful artist, carpenter and gradually got into chainsaw carving. I'm going to tell him about you channel. We live in upstate NY. I live in the southern Adirondacks and he lives two and a half hours north near Saranac Lake. He carves wolves, eagles, the Grateful Dead bears and even did a life like tall carving of big foot for one of his neighbors. Could you run that 881 and buck some logs, I would greatly appreciate it. I just purchased a new Husqvarna 365 71cc. That's my biggest saw and all, I need. God bless you and stay safe.
Stihl 💪🏼
I have an 084AV with a 36” bar and it’s a high intensity workout cutting with it.
Haha I think I need to start lifting now other than chainsaw😂😂
I thought my 500i was a big mean saw until I got this one 🤣Its great on the mill though running a 48" bar. Hardwoods are the dominant tree I work with, so I'm happy with as much power and torque I can get
the 500i is huge and practical we had one in losging course tat thin ripps
That’s one powerful saw !
One can fell some big timber with that one !
lol right!
Im so happy u got your saw; God Bless u and ur husband :)
God Bless! Thank you we’re so excited! 🥳🥳😁
That chain looks angry...lol... I was waiting for the startup. Til next time... God bless!
It’s so angry. Lol you don’t want to miss with it. 😳🤯
Congrats Love🎉🎉
Now you have a whole new set up with 404 chain, bar and sprocket. Buy replacement chain and sprocket now. Is the chain round ground square tooth? Square ground chain takes a very expensive grinder or lots of experience sharpening with a special file. Should be a lot of fun either way.
Lots of learning curves 😋
Have fun and be careful with that one 😉. I saw you start it on tictok. Take care and have a blessed and safe week
Thanks Billy! Haha it’s definitely something I’ll have to get used too. 😅😅
Little girl with big boy toys !!! Cant wait to see you run this bad boy !!!
Lol not carving with that bad boy just milling. Excited to share with you all! 😁😁
That's a powerful tool!!!
quel magnifique machine,
que de belles courbe,
et une puissance inouïe...
la machine bien sûr soyons d'accord 😅😂😂😂😂.
bonne journée à vous,
amusez vous bien avec votre nouvelle machine
Wow the little girl hardworking stihl is best i have saw shop Dreem work with you 😊
Seeing those two saws together reminds me of... me and the guy she told me not to worry about
Good job young lady !
You're right, was hoping to see you start it. It may be more than a big girls saw, this saw is a handful for most men, and requires due respect for safety reasons.
I have a couple vids of me starting it up. Mostly just use it for milling
SAYA DARI INDONESIA ANDA SANGAT KEREEN DAN MACHO,, SAYA SUKA ANDA DENGAN STIHL 881
I'm reminded of the phrase "Go Big or Go Home". Or in this case, go biggest or go home.
ha, I got a Stihn vintage 90 power head with 47" bar. i could do 8 cookie cuts log 45" dia. and tired. had fill oiler after 2 cuts.
told 13hp motor. I could not stop chain, slower speed but tons of torque.
You be careful, that a handful of power !
Indeed it is! Excited for the journey! 😋
Just saw an 881 at Boonville yesterday, I wondered if you would be getting one! Looks nice
Aww Nice Mike! They look bigger in person. Lol We’ve been saving up and finally pulled the trigger! Maybe we’ll bring it to Paul Bunyan?!😋😋
That is a beast 881 hope you have the muscles to handle that big monster
Beast Mode!
Nice new toy!
It sure is.🥹 Thank you!
The best saw in the world. I wish I had one
Wow, that’s like my dream chainsaw ❤
nona sangat tau tentang mesin senso mantap
Very nice
how many drive links on that chain looks ah lot like a 32" 105dl but it might be 36" 114dl and I'm assuming 3/8 pitch of course
close, lol. It's a 36in bar but not 3/8 its .404 so it has 108dl
That is a small chain, my big chain is for a 6' bar. that is pretty big. I use that with my 5' Granbery Alaskan Mill. Ron USCG RET in PA
woooww increible maquina
Thank you for your videos.
I like pritty girl and incredible chainsaw.
I have ms 231, for home use it's a good chainsaw.
I should have asked santa for one of those for christmas!!!😍
geting a knife inpossible goota love the mindset
Wow I’m in love 😍 lol
Temos uma Fábrica Sthil no Brasil, más ou 881 infelizmente não está disponível prá nós. 😢
Nice!
🙌🙌🙌
Mon dieu Jenna tu es plus équipé que moi😂😂😂😂 moi j’ai juste une 021 et une ms 440 mais ça marche très bien déjà
Love from India Assam
Me encantan estos motores gigantes
I want to buy a Stihl backpack blower and i want it to come in a box just like you have in this video unboxing, can you help me out, please? I went to a local ace and they sell it assembled already with all sales are final they wont sell me it unassembled inside its original box and if it's used no returns accepted.
You’re tooooooo excited. It’s probably the most dangerous hand tool you can own
haha It is LOL
Greetings from Waiblingen,Germany.Nice chainsaw 👍
Had you channel in my recommended feed that saw is a beast it looks to be bigger then you😮😮
haha aww thank you for watching! I appreciate it!
😍😍
❤️❤️❤️
It looks like Size matters to You!!!
Una bomba di macchina
There are some You Tube videos of some guys from Indonesia climbing huge trees barefooted, cutting on the ground, etc. They have no safety equipment and use the Stihl MS881 and a giant Husqvarna to cut down/cut up HUGE trees. No problem.
nice cute
Tyűű!Meg hajtanám,mint zinger a találmányát!!😊😊!!
Prince??
3:40 close your eyes an listen
7:39 is also nice to hear 😂
@@Landser_WH 👍👍
Девочка любит большие игрушки😊
❤❤❤❤❤
Какая огромная пилищща!😊
Die MS 881 ist eine brauchbare Säge, vorallem wenn die Schneidegarnitur mit 160 cm Arbeitsbreite verbaut ist. Aufgrund der Leistung und dem Einsatzgewicht ist die Säge etwas gewöhnungsbedürftig.
❤😎👍
881 oh lawd
My, you're shot out of a cannon 😂 Did you carve those bears? Nice work, if so....
yes i did :)
@@chainsawjenna Looking forward to seeing more of your work
241❤❤❤
The most beautiful girl with the most powerful saw ❤❤❤❤
Wouldn't start?. No test cut.
I do in my other videos hahah thanks for watching!
I want to go back and give a thumbs up after you tossed the manual, dang, I gave away my thumbs up too early.
✌️
Even for milling I wouldn't go any bigger than a 661 stihl or 395/592 husqvarna and 3/8 chain 404 is to much and will make you saw work to hard but that's just me lol
She looks realy like a working girl hero. ;-))
I am a mechanic at a stihl dealer you can't sell a stihl saw over the counter thay can lose there license
I surehope this does not become a doot stop. These big saws are brutal to start because off cc and design of the motor.. A 661 with a 2 foot bar would be a easier saws to learn milling then running a monster saw.
Loveky saw
No start up!!? Did I miss that? lol
Next time lol 😁😉
The 241 has 42,8 cc and the 881 has 121,1 cc of displacement. That is triple the size: do the math!
Husqvarna 592XP is as good or better for less cost!
😘
IMO a ported ripsaw 661 is WAY more reliable than an 881. An 881 is good for milling, but Jesus Christ almighty is it hard to start. Even with the decomp valve!
Hey kiddo that's a big saw ya got there girl. Let me start this off by saying that your cute as a pink button. And do you really think you can handle that monster saw? That's not just any saw kiddo. That's the biggest and most powerful chainsaw on the planet. It has 10 and a half horse and can handle a forty inch bar. So all I got to say is good luck in using that thing. And be carefull with that thing. And most of all don't cut your leg off with it.
😱👏👏👍🥂
I just wish there were more chainsaw girls around.
"Cant even lift it up" as she is lifting it.
"What is this!?" - "this is a machine" answered your own question
Shele 260 best of best
Why do so many people spend a gob of money on something so nice and not care about the owners manual it don't take long to read but a nice video
Daaaaaaaaaaaaam girl, that chainsaw is bigger than you are. 🤣🤣🤣🤣 At least you have good taste in chainsaws because as we all know, STIHL RUNS THE YARD. 😊👍🏿 #stihlpower #stihlisyourdaddy #stihlrunstheyard
Наверно это дочь Alicia Christian «Jodie» Foster ??🤩
She likes big bars... am having mine delivered in two weeks ❤❤❤
Stick wheels on it you could ride it