Jenna being a huge stihl guy with only big bore saws they hate the cold like we do lol. Im impressed by the fact you left hand started that saw hell im getting older and in the cold those saws will rip saw your shoulders out ! Another fun video to pass this winter by. Be safe and keep cutting girl! ❤ the new Jersey logman
If you're taken, spoken for, then that man is so blessed! Not trying to be creepy youtube commenter guy here lol. I mean that with all due respect. You are very talented, intelligent, and hard working. You definitely have a very cool personality and put out great content. I have definitely learned from you. Thank you.
That ms 881 sounds awesome when it starts up I love you 💞😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎
Thanks Kyle! I need to get the smallest bar for this monster to to do some blocking. LOL We go this for milling purpose really and its freakin awesome!
Chain too tight 😮 I can hear the whine and the chain stops almost instantly when you let off the throttle. Good job starting the saw! Shit looks tough.
Nicely done. I keep hoping STIHL will take the injection system from the 500i and put it into like an 882i. Those stihl injection machines are so easy to start compared to a carburetor.
Also, when it comes to warming up saws it’s ok to rev it some when cold to keep it running you just don’t want to pin it wide open. I also rev it up in stages, I have a short on it and I find that helps them last the longest and have the least chance of a cold sieze from heating up to fast
I have a older 066, I’ve had awesome luck with klotz r50 and a higher octane fuel, I do give some throttle love taps to warm it up faster, I run a 36” bar, square ground full skip tooth chain and it works well on frozen wisconsin wood. That 881 is a work of art though. Messed with some 088’s but I’ve never ran a 881, I tinker with some relic 056’s in the summer for fun.
A lot of people like square tips, they just seem to hard to sharpen for what they are worth.... except for milling... I have to granberg ripper chains which are square and are awesome, but for everyday work i don't get it.... unless you give me a diff reason lol
hehe, nice workout in the cold :D That chain is a little too tight. You should give it some slack - especially if you gonna throw that thing on the shelf for a while.
That started shockingly easy. Im gonna get to do some cold starts at -40 here soon. But those 881s start nice compared to the old macs and homelites or even the 088. The wost starting will always be the Husqvarna 2100CD. 100 CC and no decomp valve and small handle, those start hard at 0 C nevermind -40
haha awww that sounds awful, no decomp valve. This 881 super new haven't ran no where near my other saws lol and it was in a 50 degree shop before hand so that's helps. haha
Make sure its top dead center before pulling. My 088 is super tempermental in general . But once its cold its like pulling over a big tree with fishing line lol . 😂 now a days i pull bar off and put it in a warm vehicle.
Oh yes! It is what it is tho. That's just something I had/have to learn to work around and be more cautious when running these tools. I'm not encouraging people to run these tools the wrong way who are new to this world, but I advise to be cautious no matter stage your in and do what makes you feel comfortable. I have years of experience of running chainsaws from an early age and I know what I'm comfortable of doing and what I'm not. What I'm trying to say be safe all the time. lol
Thank you, this is a good answer. I have only a small garden 300m² and have had only one tree to cut. So I have bought only a small electrical cainsaw from aldi. Your art is not for me. But I like it and will follow you. Have you evertried special tools for lefthanders? I am old now and have a long experience in usinng this wrong tool. Changing back is difficult. I am from the generation forced to write with the rigth hand. That is really a big mistake. Do you like to change this experiences about beeing lefthanded?@@chainsawjenna
Hi chainsaw Jenna I just want to let you know that all stihl products don't usually like the cold weather it only works when it's cool to use them properly from Thomas Australia 🇦🇺 😊
A good chainsaw video I love the big powerful chainsaw more important keep your self warm good thick coats hats thermal under clothing you will be bullet proof and some hot food 🍵 in side of you thanks very best wishes from Mr Ben Golby 👍👌
@@chainsawjenna thank you very much for your response, I saw at Granberg that there were smaller chain pitches like the 3/8 1.3mm (050) lp, in GB Pro Titanium precisely to promote penetration and cutting precision with large guides. length, both for carving and miling.. only no one seems to use it or has any feedback for high-power machines.. best regards🎈
Try pulling over a 090 I have one and I have the 881 as well and the 090 pulls over a lot harder you should see how cool those STIHL jet powered saws are
If you add10 mil litter sthill fully synthetic ultra 2 stroke oil too your aspin gallon petrol you get a rich mix of 40-1 instead of the old 50-1 mix that's what I use in my chainsaws and leaf blower and efco hedge trimmer
Wanting a big foot statue similar to Mike Morgan’s wanting to know if you will make me one doing a video And what it would cost and if you go to the Paul Bunyan show next year I could pick it up there, Jenna
i am impressed with the fact she actually started it , i am male and probs no bigger than she is , and i realy struggle with them , i had to get someone to hold down my ms500i so i could give it a good yank to start it , 🤣🤣🤣
I have a challenge for you jenna cold pullstart video when the eninge is not starting up a long time no prime button using &no choke using only cold engine pullstart video
Ты что,левша?Так можно сломать стартер,если сразу дергать с ударом.Надо сперва потянуть,чтоб произошел зацеп с собачками на маховике,а уже потом дёргать.
Ok super la tronçonneuse mais ils vendent pas les bras avec pour démarrer 😂en plus quelle poids cette machine faut la tenir le guide et plus grand que la gamine 😂après 15 minutes avec une machine comme ça ta plus de bras 😅
Not true, it's called if someone maintains their equipment then it shouldn't have a problem starting how ever long it's been sitting around. So stfu because you don't know how long it's really been sitting around because are not them.
So all you do is start saws for views!! Wow, your mom & dad must be so proud!!it's gonna get real guys. What are you gonna get a job or do something useful???
Jenna being a huge stihl guy with only big bore saws they hate the cold like we do lol. Im impressed by the fact you left hand started that saw hell im getting older and in the cold those saws will rip saw your shoulders out ! Another fun video to pass this winter by. Be safe and keep cutting girl! ❤ the new Jersey logman
Thanks man I appreciate it! We enjoy sharing our experiences with you all and hearing your inputs 😁
The size of that chainsaw is mind blowing, as big as you, I give you props for even holding it up 😅👏
Nice cold start. Can’t wait to see what’s in the ripsaw box.
me too!!! I'll show you guys don't worry!
Ripsaw 2511 would be my guess
That’s what I thought too@@scottkellar6549
If you're taken, spoken for, then that man is so blessed! Not trying to be creepy youtube commenter guy here lol. I mean that with all due respect. You are very talented, intelligent, and hard working. You definitely have a very cool personality and put out great content. I have definitely learned from you. Thank you.
That thing is massive, great job Jenna!
That ms 881 sounds awesome when it starts up I love you 💞😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎
Seriously awesome watching you starting that beast! Can’t wait to see you do some blocking with that animal! 😉
Thanks Kyle! I need to get the smallest bar for this monster to to do some blocking. LOL We go this for milling purpose really and its freakin awesome!
@@chainsawjenna Mill any slabs yet ?
Although you know if you block a bear with that beast it’s going viral!
Chain too tight 😮 I can hear the whine and the chain stops almost instantly when you let off the throttle. Good job starting the saw! Shit looks tough.
Let it warm up and make a cut. It was pretty tight.
Your skil with chainsaws just keeps on amazing me!! Now opening shop door with it. Lol great video
haha I even use it as a spatula when I'm cooking LOL
Nicely done. I keep hoping STIHL will take the injection system from the 500i and put it into like an 882i. Those stihl injection machines are so easy to start compared to a carburetor.
Yeah it would be nice, I have mix feeling about it as well. Lol would be nice tho!
Also, when it comes to warming up saws it’s ok to rev it some when cold to keep it running you just don’t want to pin it wide open. I also rev it up in stages, I have a short on it and I find that helps them last the longest and have the least chance of a cold sieze from heating up to fast
Yes, I totally agree :)
I just got mine today I usually use a 251 ms I cut alot of big oaks in my business and I thought that this was just badass
I have a older 066, I’ve had awesome luck with klotz r50 and a higher octane fuel, I do give some throttle love taps to warm it up faster, I run a 36” bar, square ground full skip tooth chain and it works well on frozen wisconsin wood.
That 881 is a work of art though.
Messed with some 088’s but I’ve never ran a 881, I tinker with some relic 056’s in the summer for fun.
A lot of people like square tips, they just seem to hard to sharpen for what they are worth.... except for milling... I have to granberg ripper chains which are square and are awesome, but for everyday work i don't get it.... unless you give me a diff reason lol
Nice job Jenna, you surprised me.
Now, to get to work.
Ripsaw box, let's go!
You are too cute. Love your Videos. The 881 might weigh more than you do. I think my 462 is heavy. RipSaw now that's a real PowerSaw Gal.
OK, I subscribed ... you suckered me in with all that cuteness!
That is a good start up !
Hope you have big sticks to cut !
hehe, nice workout in the cold :D That chain is a little too tight. You should give it some slack - especially if you gonna throw that thing on the shelf for a while.
Дитинко.цей.штіль.важить.більше.як.ти.молодець.справляєшся
That's a lovely saw...
Congratulations Jenna on cold starting this bad boy in this type of weather!
Best unedited cold start video of the MS881 by a girl out there 👍👏👏🙌🔥💯
That started shockingly easy. Im gonna get to do some cold starts at -40 here soon. But those 881s start nice compared to the old macs and homelites or even the 088. The wost starting will always be the Husqvarna 2100CD. 100 CC and no decomp valve and small handle, those start hard at 0 C nevermind -40
haha awww that sounds awful, no decomp valve. This 881 super new haven't ran no where near my other saws lol and it was in a 50 degree shop before hand so that's helps. haha
@@chainsawjenna yeah, you get used to it I guess, there’s a reason I put snowmobile handles on some of my saws😂
Make sure its top dead center before pulling. My 088 is super tempermental in general . But once its cold its like pulling over a big tree with fishing line lol . 😂 now a days i pull bar off and put it in a warm vehicle.
Thats realy a monster! Have you ever had a problem with tools all designed for right handed people?
Oh yes! It is what it is tho. That's just something I had/have to learn to work around and be more cautious when running these tools. I'm not encouraging people to run these tools the wrong way who are new to this world, but I advise to be cautious no matter stage your in and do what makes you feel comfortable. I have years of experience of running chainsaws from an early age and I know what I'm comfortable of doing and what I'm not. What I'm trying to say be safe all the time. lol
Thank you, this is a good answer. I have only a small garden 300m² and have had only one tree to cut. So I have bought only a small electrical cainsaw from aldi. Your art is not for me. But I like it and will follow you. Have you evertried special tools for lefthanders? I am old now and have a long experience in usinng this wrong tool. Changing back is difficult. I am from the generation forced to write with the rigth hand. That is really a big mistake. Do you like to change this experiences about beeing lefthanded?@@chainsawjenna
You should have ripsaw port that 881
That could be a possible lol
Hi chainsaw Jenna I just want to let you know that all stihl products don't usually like the cold weather it only works when it's cool to use them properly from Thomas Australia 🇦🇺 😊
Good job Jenna
Yes thats Girl Power with mighty Maschine😊😊😊
A good chainsaw video I love the big powerful chainsaw more important keep your self warm good thick coats hats thermal under clothing you will be bullet proof and some hot food 🍵 in side of you thanks very best wishes from Mr Ben Golby 👍👌
Hi Jenna do you do dog carvings? Would love to purchase one if possible.
Now it"s Big Log Larry & Giant Saw Jenna!
hahaha right!
thanks for watching!
Hello Jenna, good video 👍🏼
This chain is a 3/8 lp for carving or .404?
It's a .404 chisel chain for milling.. I got it at granberg
@@chainsawjenna thank you very much for your response,
I saw at Granberg that there were smaller chain pitches like the 3/8 1.3mm (050) lp, in GB Pro Titanium precisely to promote penetration and cutting precision with large guides. length, both for carving and miling.. only no one seems to use it or has any feedback for high-power machines..
best regards🎈
Great. Now I want to buy an 800.
Seus vídeos são muito bons. Temos uma fabrica Sthil no Brasil, mas não temos o 881😢
Try pulling over a 090 I have one and I have the 881 as well and the 090 pulls over a lot harder you should see how cool those STIHL jet powered saws are
Buena maquina
Why didn't you start it on high idle after the saw popped off? Then it would run...
If you add10 mil litter sthill fully synthetic ultra 2 stroke oil too your aspin gallon petrol you get a rich mix of 40-1 instead of the old 50-1 mix that's what I use in my chainsaws and leaf blower and efco hedge trimmer
Now thats a saw it was bigger than her just getting out of the building was amazing
You just proved Diamante comes in small packages
Are you going to be at the Paul Bunyan show (Ohio) this year?
That saw is bigger than you ❤❤❤
It's a monster!!!!
How long is that saw? I had no idea they made them that big, but nice job on the cold start!
This is a 54" bar that I got from Granberg. It's pretty massive, what's crazy is that they make even bigger bars. lol
That thing weighs more than you 😂, you got it though!
It takes a little to tame this beast lol
Nice video
From ur viral Facebook vid haha the way you said October in the cold
Auwucktubar
wtf are you saying?
Bạn bán máy cưa nay bao nhiêu tiền vậy bạn
Wow Jenna you trying to do a cold start
Wanting a big foot statue similar to Mike Morgan’s wanting to know if you will make me one doing a video And what it would cost and if you go to the Paul Bunyan show next year I could pick it up there, Jenna
Hello go ahead and email Chainsawjenna@gmail.com :)
Дівчата люблять великі розміри😂😉
Nice ❤
i am impressed with the fact she actually started it , i am male and probs no bigger than she is , and i realy struggle with them , i had to get someone to hold down my ms500i so i could give it a good yank to start it , 🤣🤣🤣
😱👀👀👀
Hey what kind of hydraulic table cart have you got? I’m in the market for one.
Woww keren bro
let the chainsaws for the men that know
Молодец
❤
Ты точно готова к зомби-аппокалипсису, ты знаешь чем можно уничтожать зомби! 👻😁👍🇷🇺
Chain oiling not good or overtihgtened chain
Need to make a v-twin engine
Как задача для этой пилы? Что вы делаете?
It's for an Alaskan mill she has.
Huge saw. That bottled fuel is a no for me.
How much does your 881 weigh all fueled up?
It’s like 45 pounds I think
I have 056 with no decompression. I wouldn't even try it on a day like that
Where is this. ..?
Geile Säge, aber das Geld für einen Doppelkammer Kanister mit Schnelltankverschluß war scheinbar nicht mehr drin.
I have a challenge for you jenna cold pullstart video when the eninge is not starting up a long time no prime button using &no choke using only cold engine pullstart video
huh? What's the point?
@@zod5966 the girl need alwaw full choke en prime button when the saw not startup after long time
@@zod5966 &this is not a cold startup after long time saw starts to easy
I don't know how old you are. Over 21 I guess do not look it, but you will get carded until your 30's enjoy it is a gift from your parents.
I don't know your IQ but that makes no sense whatsoever 😂
What?!
Why don't u use starting fluid or Either.
Either and starting fluid are the same thing
Jenna that saw is bigger than you.
lol I know It's kinda hard to hold with a bar that big on it. I need to be taller to hold this sucker lol
Will at.least your ready to carve a giant red wood tree.Ha!ha!ha!.. i am impressed with your carvings. Great job. Tell Ben to get you heat in the shed
How much price
north of $2,000
@@chainsawjenna to much money no need this chainsaw
I love you
Ты что,левша?Так можно сломать стартер,если сразу дергать с ударом.Надо сперва потянуть,чтоб произошел зацеп с собачками на маховике,а уже потом дёргать.
Moisés game Mato Grosso Boa noite Blz 👍👍👍🇧🇷🇧🇷
Ok super la tronçonneuse mais ils vendent pas les bras avec pour démarrer 😂en plus quelle poids cette machine faut la tenir le guide et plus grand que la gamine 😂après 15 minutes avec une machine comme ça ta plus de bras 😅
not bad pullstarting for a super big amateur as you
📐🪚🤛🧐👍
I changed my mind you will still be getting carded in your 40's
The bar is too big the saw should not nose dive
It’s fine lol, what else is gonna run that bar. Eventually with a longer bar they are nose heavy it’s normal
Big wood requires big saws with long bars,besides it's for an Alaskan mill. Itll be making boards and slabs most of the time.
See the exhaust smoke ❤ u do know u are polluting the world
lol I use Apsen Fuel;)
@@chainsawjenna do you care about the air pollution
Jenna this is not a col pullstart video after a fiew Monts the saw start up to easy to be not starting up a long time
Not true, it's called if someone maintains their equipment then it shouldn't have a problem starting how ever long it's been sitting around. So stfu because you don't know how long it's really been sitting around because are not them.
chainsaws in Doom
So all you do is start saws for views!! Wow, your mom & dad must be so proud!!it's gonna get real guys. What are you gonna get a job or do something useful???
Ive this is a complete start after fiew months i aim santa claus jenna😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂