K&N was originally a racing oil filter company, racing engines require less restriction of flow due to high volume oil pumps and high pressure pumps. The problem with using K&N filters in a non-modified factory engine has to to with filter efficiency, K&N filters are made for increased flow, in order to achieve that flow they reduce efficiency so the filter doesn't provide as much restriction to flow. As a result K&N filters are about 85% efficient at trapping contaminants while a standard oil filter might be 98% efficient. This is pretty much the same with K&N air filters, they don't trap as much dirt and debris because they are made for flow as opposed to maximum filtration.
Thanks for the video. After starting it up. You should’ve checked the sight glass afterwards, then top off until at proper level. Cycle Gear use to sell the HiFlo 141 filters for $5 a piece, it looks like they don’t carry them anymore. HiFlo makes the K&N filters for the Xmax.
With the way things are going in the world with supply chain, rumors of wars with China, ect. I always get few years worth of filters and oil, an any other wear an tear parts like brake pads, cut belts, brake fluid, I do that for my generators and any mechanical motorized equipment I got
Looks pretty straight forward,, so, I think I'll do my own oil change....I know you are probably an experienced mechanic, but my teeth were on edge watching you tighten those tiny 8mm bolts....two words....Torque wrench
@@slowridersmotovlog201, i watched the video again and I see you don't have a dipstick. You probably have a window through which you look at the oil level? I have an Xmax 400 and the oil plug is also the dipstick. In the instructions, it says that it should be screwed, but when I screw it, it shows about 2 dcl too much. If I just put it in without screwing it shows exactly. I had a mechanic change it for me and now I'm in doubt, whether he overfilled me, or he didn't change my filter, or the instructions say it wrong. I also saw one video on YT where the dipstick is only dipped in oil, without screwing. But now I'm confused. I even drained some oil so that now the level is at max when the plug is screwed on. I'm afraid it won't be enough now. As a precaution, I will refill at least 1 dcl from the 2 dcl that I had left when I drained it.
I have the same experience with the leak. I tightened it up with a torque wrench with 10nm. After testing for about 56km still has a little oil leak at the top of the cover just very little. Have u experienced it with yours?
Can you make more videos on maintenance for this awesome bike. It would help many of us! Thanks 👍
K&N was originally a racing oil filter company, racing engines require less restriction of flow due to high volume oil pumps and high pressure pumps. The problem with using K&N filters in a non-modified factory engine has to to with filter efficiency, K&N filters are made for increased flow, in order to achieve that flow they reduce efficiency so the filter doesn't provide as much restriction to flow. As a result K&N filters are about 85% efficient at trapping contaminants while a standard oil filter might be 98% efficient. This is pretty much the same with K&N air filters, they don't trap as much dirt and debris because they are made for flow as opposed to maximum filtration.
I appreciate the feedback and insight on oil filter.
Well done scooterman dan..bravo bravo.👏 ..yes there is a sightglass to see proper oil level i say i say.
there are torque specs for these bolts Oil filter cover is 10NM engine oil drain bolt is 20NM.
Great video and thanks for helping save big money at the dealership 😆👍
Your welcome and thanks for watching!!
Awesome video brother thanks
Thanks!!
Thanks for the video. After starting it up. You should’ve checked the sight glass afterwards, then top off until at proper level. Cycle Gear use to sell the HiFlo 141 filters for $5 a piece, it looks like they don’t carry them anymore. HiFlo makes the K&N filters for the Xmax.
With the way things are going in the world with supply chain, rumors of wars with China, ect. I always get few years worth of filters and oil, an any other wear an tear parts like brake pads, cut belts, brake fluid,
I do that for my generators and any mechanical motorized equipment I got
I do the same. I have enough oil and filters to last awhile. Go Ravens!!🏈🐦⬛😆
Why do websites recommend me hiflo 972 oil filter for xmax 400? I mean, what types of oil filters are there for xmax 400?
I’m not sure for the 400
Looks pretty straight forward,, so, I think I'll do my own oil change....I know you are probably an experienced mechanic, but my teeth were on edge watching you tighten those tiny 8mm bolts....two words....Torque wrench
I’m definitely not
Thanks!
Hey Brother got the sticker today thanks I hope you do shirts next
Great!! I’m glad it got there. Soon my friend
Is the oil filter the same for the 2024 Model?
Yes it is
I didn't see where you check the level?
I guess I should’ve probably added that part.
Could you please make a video on how to properly change the coolant on this scooter?
Yes
@@slowridersmotovlog201, thank you
@@slowridersmotovlog201, but how to check the amount of oil correctly? By screwing the dipstick or just putting it in the oil without screwing it?
@@slowridersmotovlog201, i watched the video again and I see you don't have a dipstick. You probably have a window through which you look at the oil level? I have an Xmax 400 and the oil plug is also the dipstick. In the instructions, it says that it should be screwed, but when I screw it, it shows about 2 dcl too much. If I just put it in without screwing it shows exactly. I had a mechanic change it for me and now I'm in doubt, whether he overfilled me, or he didn't change my filter, or the instructions say it wrong. I also saw one video on YT where the dipstick is only dipped in oil, without screwing. But now I'm confused. I even drained some oil so that now the level is at max when the plug is screwed on. I'm afraid it won't be enough now. As a precaution, I will refill at least 1 dcl from the 2 dcl that I had left when I drained it.
@@dejandezman6139 yes mine has fill window not a dipstick
How many miles on the first-time oil change on Xmax and the second time and so on what are the mileages?
600 then every 4,000 or so I would do it every 3,000
when you put in the oil filter cap is there a little pressure to set in the oil filter? is it like squeezing the outer rubber of the oil filter?
Yes it is
@@slowridersmotovlog201 thank you for the quick response. :)
I have the same experience with the leak. I tightened it up with a torque wrench with 10nm. After testing for about 56km still has a little oil leak at the top of the cover just very little. Have u experienced it with yours?
No once I tightened it up a little it stop. No leaking at all. You might need a new rubber gasket that’s in the oil filter cap.
@@slowridersmotovlog201 yeah I think so. I already ordered one. Will replace it on my next change oil. Will let u know what will happen. Thanks
👍👍👌
Thanks
You did not RESET the Oil in Dashboard
Your content is very great. But I have a question?
Sure
Castrol is way better
Too tight