DIY Arduino based 6 Channels RC Transmitter & Receiver (Part 1 - Transmitter)
ฝัง
- เผยแพร่เมื่อ 28 พ.ย. 2020
- In this video we will make a Arduino based six channel rc transmitter. This video will be first part of our rc transmitter and receiver video series.
At the second part we will make receiver module of the transmitter and we will use these modules in rc remoote car, model plane, remoote robot arm and drone.
I put the modules that I have used in this video tutorial at below.You can find Arduino code and connections in the link below. Enjoy with the video.
Bu videomuzda Arduino tabanlı 6 kanallı rc kumanda yapacağız. Bu video rc kumanda video serimizin ilk videosu olacak.
İkinci kısımda kumandamızın alıcı kısmını yapacağız ve daha sonra bu kumanda ve alıcı modulünü kullanarak uzaktan kumandalı rc araba, robot kol, model uçak ve drone projeleri yapacağız.
Projede kullandığım bileşenleri aşağıda belirttim. Ayrıcı projenin kodları ve bağlantı şemasına da aşağıda ki linkten erişebilirsiniz. İyi seyirler.
------------------------------------------------------------------------------------------------------------------------
Instagram,
/ makeitsmartt
------------------------------------------------------------------------------------------------------------------------
Required Components
1 piece Arduino Nano
1 piece NRF24L01 + PA + LNA SMA Antena 2.4GHz
1 piece AMS1117-3.3 voltage requlater
2 piece 10K potentiometer
2 piece Arduino HW-540 Joystick
1 piece 10 UF Capacitor
1 piece IC-139 Toggle Switch ON-OFF
--------------------------------------------------------------------------------------------
Get the Arduino code and schematic from,
drive.google.com/drive/folder...
Background music from,
Müzik: audiotrimmer.com/tr/telifsiz-... - วิทยาศาสตร์และเทคโนโลยี
Good work waiting part 2
Thank you very much. Here is the other parts. th-cam.com/play/PLyJg8q4GPHq9eiUHCbdS3iOY8sAFVzlKQ.html
Çok güzel bir video olmuş, severek izledim😊
Teşekkür ederim 😊
This was amazing and more than that under my budget 😂😂.
I am happy to hear that 😀
This is what I am searching for since 5 months 🙌🙌
I am glad if it helps to you. 😀
I will use it in drone project before that when I try to find out a TH-cam video which helps me everytime creator used factory made transmitter which is very costly . So thnxx bro 😁
You're wellcome 😀
Is there any need to change in code for homemade drone and homemade ESC ?
Is this video help to make a drone?
HOW DOES WE CALIBRATE ESC IN THIS ARDUINO TRANSMITTER IS IT SAME AS IN REGULAR TRANSMITTER PLZ REPLY
Can I use this in rc drone what is the range of transmitter
I have a question. in this part the 3.3V for the NRF42L01 chip comes from the batterypack with a 3.3v stepdown regulator in between. but in the receiver part the 3.3V comes from the arduino uno's 3.3V pin. is there a specific reason for this? or can i also get the power for the NRF chip in the transmitter from the arduino? love the vids btw :) really helpful for a electric longboard project i'm doing!
Also, i don't see a power suply in the receiver video and schematic. am i looking at it the wrong way? or is that possible for a receiver?
Thanks for the comment. The 3.3V out is not enough for the NRF24L01 PA + LNA, but it is ok for the NRF24L01 PA. The nrf24 with antena requires more power so the 3.3V out of arduino is not enough. This is the reason.
@@makeitsmart6642 thanks for the reply! So is it possible for a short range, i'm talking about 1.5 - 2m max, to run without a antenna? And then just get the 3.3v from the arduino?
@@marten4436 Yes, You can reach over 10 meters range at closed area without antena
@@makeitsmart6642 okay! Thanks a lot!
I made this thing and it's not working, The transmitter seems to be working fine, I opened the serial monitor and it was ok, but the receiver is not working, The receiver serial monitor showed signal lost. What should I do ???
Good
Thank you very much.
Can I use it in my drone
Please make your video to more close and zoom..
Overall it is very good❤️❤️
I am spend my all internet data to see your all videos..
Thank you very much for your support and advice. 👏👏😊
👍👍
Hello, do not be bored, I have a question, you are sending the link between the sender and recipient code, thank you
What will be the range if I use nrf24l01 with antenna in both reciever and transmitter
Will range increase?
Nrf24l01 with antena has 1000 meters range. İf you will use antena at both side the range will be 1000 meters and the connection will be more robust
Potentiometer can be replace with toggle switch
Yes ofcorse
Is it compulsory to use voltage regulator ?? Y cant I use the 3.3 volts from the ardriuno nano (for transmitter) plz help
When I used 3.3v from Arduino, I saw it is not enough for NRF 24 if it has antena and it couldn't run stable. But if you are using NRF 24 without antena you don't have to use voltage regulator. You can use 3.3V from Arduino
@@makeitsmart6642 thanks
How can I connect an esc (brushed ) to the reciver ??
Can i get your Instagram id I need help
Yes, you can contact me on Instagram
@@makeitsmart6642 I'd plz
So why u can use bread board module
I just used the ams1117 3v3 voltage regulator of the module. You can use any 3.3 V voltage regulator for feeding NRF 24L01.
can i use nrf 24lo1 without antena version for both transmitter and reciver
Yes, ofcorse you can
@@makeitsmart6642 thanks
Bro can I use aurdino uno , instead of nano?
Yes, you can.
Sir can you Please send second part of this video?
How can I do this with three Joysticks ?
Can i use this transmitter and receiver for homemade drone?
Yes ofcorse you can use.
Do I need to change the code ,if I use Arduino UNO in transmitter
No need to change the code.
Bagus. Tp sy blm bs bikiny
Is it necessary to use bread board
I just used the ams1117 3v3 voltage regulator of the module. You can use any 3.3 V voltage regulator for feeding NRF 24L01.
What is the software you used to draw the circuit
It is fritzing. You can download from 'fritzing.org/'
What's that you used for that battery I didn't get.there is circuit with battery ?
You can use any battery that voltage between 7.4V and 12V with this circuit
Hi can I use mega328p instead of arduino nano
Yes, ofcorse you can use.
Thanks for replaying
Pls can this tx and RX be used to control elevons plane
How to connect for delta wing?
Just like as normal six channel transmitter and receiver set.
How many range of this transmitter ?
Theoretically 1000 meters and I have tested 400 meters at open area.
What is its range????
Theoretically 1000 meters and I have tested 400 meters at open area.
Bro I have made it but it is not working
Can we make it even more ... easily.😀😀😀
I am thinking on preparing more detailed video series about transmitter and receiver
sir well you give your transmitter and reciver for me
Hello bro please give me library link in the code
The receiver circuit for this transmiter; th-cam.com/video/Zwhi1cE2h2Y/w-d-xo.html
There is also a brushed esc circuit that can be used with the receiver; th-cam.com/video/c6qZyqfxO1A/w-d-xo.html
Where i can get the materials
You can buy them from any electronic store or internet
@@makeitsmart6642 tell me a website to buy
自製好手工……！
萬歲利害……！😄😎😉
Sir mene pura bna liya but work nhi kar rha
Apna reciver bhi bnya ha aur coding bhi ko ha?
Woh much money spends in transmitter & receiver
Hi bro I wanted to make f-22 aeroplane with this transmitter and receiver so can you please give me code for 2 servomotors left and right and up and down with brushless motor. Bro I don't know codeing so please give me I will subscribe to your channel.
No detail whatsoever 🤔🤔🤔