DIY Arduino based 6 Channels RC Transmitter&Receiver (Part 2 - Receiver)
ฝัง
- เผยแพร่เมื่อ 30 พ.ย. 2020
- In this video we will make a Arduino based six channel rc receiver. This video will be second part of our rc transmitter and receiver video series.
At the next video we will use this receiver module in rc remoote car.
I put the modules that I have used in this video tutorial at below.You can find Arduino code and connections in the link below. Enjoy with the video.
Bu vidyomuzda Arduino tabanlı 6 kanallı rc kumanda alıcısı yapacağız. Bu video rc kumanda vidyo serimizin ikinci vidyosu olacak.
Bir sonraki videomuzda bu kumanda ve alıcı modulünü kullanarak uzaktan kumandalı rc araba projesi yapacağız.
Projede kullandığım bileşenleri aşağıda belirttim. Ayrıcı projenin kodları ve bağlantı şemasına da aşağıda ki linkten erişebilirsiniz. İyi seyirler.
------------------------------------------------------------------------------------------------------------------------
Instagram,
/ makeitsmartt
------------------------------------------------------------------------------------------------------------------------
Required Components
1 piece Arduino Nano
1 piece NRF24L01 2.4GHz Wireless Module
1 piece 10 UF Capacitor
--------------------------------------------------------------------------------------------
Get the Arduino code and schematic from,
drive.google.com/drive/folder...
Background music from,
Müzik: audiotrimmer.com/tr/telifsiz-... - วิทยาศาสตร์และเทคโนโลยี
I have made and brushed esc to use with this receiver; th-cam.com/video/c6qZyqfxO1A/w-d-xo.html
This is suberb sir
I made this thing and it's not working, The transmitter seems to be working fine, I opened the serial monitor and it was ok, but the receiver is not working, The receiver serial monitor showed signal lost. What should I do ???
Nice
Sir range kitani hai kya ham is kit me rutar ka isatamal kar sakte hai
This project can use brushless motor
Cam we use this transmitter nd reciver for the quadcopter with some big propellers nd KK flight controller ?
Yes it can work with any type of devices. Just you may need to make some parameter changes for the software at receiver side according to the device that you used.
@@makeitsmart6642 could u let me know which parameter will be changing
I m using 10×4.5 inch propeller along with APM 2.8 flight controller
This project can use brushless motor
How many meters does this go?
Hello, do not be bored, I have a question, you are sending the link between the sender and recipient code, thank you
can you flash the firmware to opentx?
Can you give the description of channel pins comparing with commercial receiver
I want to use it in DIY quadcopter
There is no IBUS,SBUS or PPM output like as commercial reciewers. All 6 channels are standart PWM output.
This project can use brushless motor
Does your signal break after some time by using same arduino
No, I have never faced a problem like that.
100%
Hey bro can you please tell the app you used to build the connections
Arduino IDE
Bro, you're videos are awesome.👌
how you connect particular wire at particular point, where can I learn that and also coding part?
waiting for your reply, it will be a great help😀
Thanks for nice comment. But I couldn't understand what you are asking. I put my code and circuit diagram at the description part. If you are asking how can program the Arduino. It is c++ programming language. You need to learn it. If you have any other questions you can ask me via Instagram.
Can you make esc for brushed moter
Sure I can.
@@makeitsmart6642 then please make it without using ardino or servo or use ic
How can I give power receiver
You can power 5V pin of Arduino with any 5V power supply or you can power VIN pin of Arduino with any power supply that voltage is between 7V and 12V
This project can use brushless motor
Up to how long distance it is working??
100 meter
And also is the code for moter throtel
the video is at here, th-cam.com/video/c6qZyqfxO1A/w-d-xo.html
Can this be used for rc plane?
Yes ofcorse yuu can. Also I made more professional version of transmitter and receiver, th-cam.com/video/x8mul0Das2k/w-d-xo.html
Well I don't have money to make this project 😕
But I know how to make it...
Please make videos zoom camera sir
Yes, I am trying to improve myself about preparing videos. I think my latest videos more beter.
The code of your reciever not opening on my android.
Plz help
I think, you mean Arduino. But I couldn't understand what you mean when you say not opening. Could you give some details
@@makeitsmart6642 OK, listen I want to program aurdino nano with your given code via android because i don't have any laptop
@@progamerprogamer1374 Ah, I see. I have never used Arduino ide on Android, so I don't know why. But may be some of the libs are missing.
@@makeitsmart6642 i see your new video. The new video is osm
brother, your projects are very very useful to me.
ehehhehehehe türk olduğunu biliyoruuuuuuum
👏👏 😀😀
Hi bro I wanted to make f-22 aeroplane with this transmitter and receiver so can you please give me code for 2 servomotors left and right and up and down with brushless motor. Bro I don't know codeing so please give me I will subscribe to your channel.
Was soll der Müll ohne Code😐
Hello, do not be bored, I have a question, you are sending the link between the sender and recipient code, thank you
Thank you