Upgrading My 03 Silverado Cluster AGAIN with a New Face, Needles, and an LED Strip!!!
ฝัง
- เผยแพร่เมื่อ 7 ก.พ. 2025
- Link to cluster face: www.ebay.com/i...
Link to LED strip: amzn.to/3xdkvTD
Link to needles: www.ebay.com/i...
You want a discount on some great L.E.D headlights and other cool accessories for your ride? Go to my link here auxito.com/8AK... and enter coupon code ZPTV to get 15% off your order!!
In todays video I’m going to be upgrading the cluster in my 2003 Silverado again with a new face, needles, and a led strip to fully light this cluster up!!!
Go check out some of my other videos and let me know what you think!! Also let me know what you want to see!
If you liked the video be sure to give it a THUMBS UP and SUBSCRIBE!!!
Comment any questions or concerns you have and I’ll answer them to the best of my knowledge!!!
Follow me on instagram: / z_p.tv
Twitter: @ZPTVofficial
Email: zptv96@gmail.com
TikTok: vm.tiktok.com/...
THANKS FOR WATCHING!!!!!
Wish you showed how you solder the light strip for all the solder beginners. Looks clean though.
You can use sticky film or a filter to change to color of the vacuum displays
By vaccum display do you mean the Odometer and what not? Didnt realize they were called vaccum displays if thats the case lol.
@@ultragalacticgamer7195Odometer, PRND123, and HVAC Control
I love the new setup, makes me wanna do mine.
Definitely like it a lot more!
@@ZPTVChannel I made a mistake and burnt out the positive lead for both ds14 & ds18…. Do you know how i can fix them?
@O4L. I’m not sure.. I’ve seen a video where a guy traced the contact back a little bit and scratched off the coating and made a jumper back to the contact. Seemed easy enough but I’m not very good at all that stuff lol
Looks way better man I look forward to doing this in my truck as well thanks for the video
Thanks! I was on the fence about doing it for a long time but I’m so glad I did!
Look up gel filters for lights n use red or pink gel film to make it white
You don't know how long I've been trying to figure this out thank you man
Use the colorful dividers and mix 2 or 3 to get the color u want then cut the original film the cluster face has
also ima do led strip under the dash near the floor where the light bulbs are down there because it’s never bright enough but I don’t think the 03 has these lights under there
They don’t. You can add them pretty easy but for some reason the factory didn’t add them lol
Great video keep it up! & by any chance can you explain and show a little more in detail how you modified de ac knobs in order to fit?
I made a video on it! All I did was cut the back completely flat and then dremmeled out the middle so that metal sleeve could fit!
th-cam.com/video/Y7fMCBedLHs/w-d-xo.html
Is the LED tube soldered on with or without a resistor? If yes wich resistor?🙏
It’s just soldered straight to the board! No resistors!
@ZPTVChannel Thanks mate!!!!!!👍🤝💪
Hey bro I did the led strip in it the one you recommended but mine is not as bright as yours and also I have a blue/greenish color even though it’s white. What gives? 🤨 it’s brighter than before but not like yours. Clear white also I did it in the 99-02 this works you just have to solder it in the bulbs location
If you want white you have to buy a new face without the blue tint. The aftermarket face is probably also why mine is so bright!
@ nice will do Im gonna try red face
how’d you get the blue check engine light?
Just swapped it out with a blue led!
@@ZPTVChannel where do i get the leds from?
@@haydenreyes210 I got these from lighthouseleds.com/led-component-lighting/rgb-leds-red-green-blue.html
You should do the ac controls next with the led strip
I just put regular leds in the climate controls.
@@ZPTVChannel ima do the strip in there since they can be cut and also the dome override/dimmer because I have no light there at all
Which one did you use for positive and negative? I know you used the trans temp light location, but which one is positive? I've been wanting to do the light strip for quite some time now.
@@slipstreamgaming1553 the top one is negative and the bottom one is positive! The 2 pads on the sides are not used.
@ thank you buddy
@slipstreamgaming1553 happy to help!
How about changing the lcd screens?
That seems like a lot of work plus I’m not sure if they make aftermarket screens compatible with these clusters..
Just check those led strips every 6 months make sure they don’t fall and burn the cluster we had customers bringing burn clusters that Houston shops made and they burn 🤦
@@danielprocluster thanks! This is the first I’ve heard of that happening… I’ll keep an eye on it!
Did you use any glue or anything to keep the strips in place?
No I the little cuts you have to make in the face holder holds it all where it needs to be pretty well! You can for peace of mind but I don’t think it’s absolutely necessary.
How did you do the bottom screen of the cluster that color?
Yeah the white face cluster cover has that built in blue strip at the bottom making the odometer blue as well. Where the black one does not, still looks amazing definitely doing this to mine.
Thanks!! And Yea the new one I bought is completely clear so the screen is the bare stock color. My old one had a bluish tint because like you said it had the cover over the screen tinted.
I found it for you, well for myself and I remember we talked about it lol.
@@ZPTVChannel if the face has a green tint you can use 1000 grit sandpaper and make it clear and use lighting gels to change the color. if you want to make your warning lights, turn signals, and cruise light blue the on the ones with green tint on the face you can sand off the tint with the same stuff as well
@@Jk.7._ do you sand it from the back or from the front of the face? Not too sure where the tint/film is on
How did you make your check engine, or any other warning lights perfectly blue?
I tried this on my older silverado but with white led bulbs and it gives it this weird light green with light yellow since theres an amber film on the warning light, which makes it a weird color
I just put a blue led in there!
Hey quick question 😂 ik I’ve already commented but for the needles do you need to replace a bulb to make the blue on it glow or will the strip do the trick ?
The strip will do it! Just have to make sure it goes all the way around the housing!
@@ZPTVChannel alright man and I ain’t gonna bother replacing the old going out bulbs I’m so excited for this build thank yoy
@bretchandler7754 I replaced all the bulbs just for a couple to go out again a couple months later and the light output was splotchy but now the light out put is super smooth and I’m hoping I get a little more life out of the strip!
What’s the led strip called the link isn’t working?
amzn.to/3xdkvTD these are pretty much the same ones I used!
How’d you do the warning lights ?
I just pulled off the old led and soldered in a t10 blue led!
@@ZPTVChannel alright thanks
What LED lights are those? I have a 2000 Chevy Silverado 1500 LS. I want to change light bulbs to these ones that you got
amzn.to/3xdkvTD they are the ones I used!
@@ZPTVChannel so there not bulbs?
@yancyhammondjr no it’s a led strip!
@yancyhammondjr kept having bad luck with the bulbs so I figured I’d give this a shot and it’s awesome!
Hello. How do you make the gear selection brighter. Everything else is nice and bright but not where you can see if you're in P R N D. Thank you
There are little chips on the mother board you have to fix the solder points. There are a couple really good videos that show exactly which ones!
th-cam.com/video/HhGSR1VV61o/w-d-xo.html
Any issues?
None so far!
I also would like to know how to change the led color on the displays
Me too
You can’t, only adding a colored filter
So did you remove the blue leds or what is in the place of the old blue leds?
I removed them all and replaced them with this strip! It’s soldered into one of the old light pads!
@@ZPTVChannelso you just removed the bulbs completely and installed led strip? I have a 99-02 cluster but the bulbs are ass n ima do this upgrade
You still using the same led strip? Or a newer one?
@JayyMoney-vr7nv the 99-02 clusters are different. The bulbs don’t solder in on the 99-02 clusters so I’m not really sure sure how well this would work.
@ they have soldering where the bulbs twist in so I can get it to work but I had Amazon bulbs and they started twitching now so ima do this led strip and if I get it looking good ima start doing clusters as a side job lol cause it’s big business here in Houston
How do you change the check engine light color
And lil things like that
The same way you would solder in new leds! They are just a little smaller than the main lights but get soldered in the same way!
@@ZPTVChannel where do I order that or they the same
@nickyd.1216 they’re the same! The factory ones are smaller but I just soldered in some t10s!
@@ZPTVChannel you got a link for them
Did you cut the end of the led strip it’s 16ft?
Yes! The strip has designated cut points so you don’t have to use the whole thing. Plus the rest of the strip is still usable for the future!
@@ZPTVChannel sounds good, how do I know if I’m buying one that is solderable
@bretchandler7754 if it’s got the 2 open end wires they should be solderable!
Where do I solder the led strip wires on the motherboard?
I chose the trans temp light points but you can solder them to really any of the points where the original lights solder to!
@@ZPTVChannelmine wont turn on but i have all good connections, I’ve tested in every way
There was one pad in my cluster that wasn’t getting power anymore. I would try another one and see what that does. If that doesn’t work try another light to see if the cluster is working
@@kauznationgaming8118 What voltage does your strip need? What voltage is provided from the pads on the board?
I know how to change the color of the odometer
Wow, screwtube didn't send me a notification for this video.
I did it how you did it I got the same lights and connected to the trans temp but my lights don’t seem to be as light as yours . Any help?
The only thing I can think of is either the dimmer switch isn’t up all the way or maybe the company started using dimmer leds. These ones are too bright in my opinion I have to dim them down lol
@@ZPTVChannel I was playing with my dimmer switch and it does dim them up and down. But it could be that the leds aren’t as strong anymore
Can you make a better video on how to connect the leds?
This one shows a little bit more!
th-cam.com/video/RZ8gBu8-FcI/w-d-xo.html
Will this work on a 2002 Chevy avalanche?
The 2002 clusters are different so I’m not sure if it will work the same or not..