I am impressed with the thoroughness of this video. I was concerned that I would have to do trial and error to get the polarity of the LEDs correct. Your presenting the chart to show each individual LED position was a great aid. I decided that I would use a solder sucker to clear the holes. I don't like to overheat connections and braid also applies more heat than I desire. Thank you, FUS Attempted Repair for a very helpful video.
Have you ever tried putting Transparent Tape for LED Lights, it comes in 1/2 to 3" width over the Display Chip before putting the cover back on to change the color of the Green Temp. They sell it in different colors. This might also work on Cluster Info Center & PRND321?
Do u know if i would be able to add these typ of gauges to my Silverado or would i have to change the pigtail on mine i have the other type with the climaiin the middle and not the knobs
How can I rebuild it so the buttons are accurate with the numbers as I move it up and down. I move the nobs colder or hotter and the numbers jump all over
That's the deoxit spray he mentioned, removes any oxidation within the knobs causing the numbers to jump around. If that doesn't fix it, you'll need to replace the bad knob.
Hi. Thanks for your videos!! I have learned so much what I need to do to switch to blue LED’s in My 2005 F350. The problem is I don’t trust myself doing it and I can’t find anyone anywhere around to do it. I need to do my climate control, info, and steering wheel controls. Would you be interested in in doing them? Of course for a price. I have everything tore apart and ready. Also I have the LED’s. Please let me know. Thank You.
Hey do you guys sell a kit that has bulbs for the dash cluster, light switch cluster and climate control? I’m trying to get them all at once instead of buying each kit seperate, I ordered my dash kit from tachtronics but haven’t gotten anything back from them lol
Very nice and informative video. A question please. My numbers are skipping very bad. Even if you turn clockwise to increase the temperature, the numbers go up and down. I might can get it to 72 and one more turn will make it go back down to 60. Will the Deoxit spray fix this and would I have to take the front black faceplate off or can I get away with it by just removing the buttons while the unit is still installed in the car? Kind regards.
Great video. I do happen to have the other version board with the plug at the top. I don't see the revision comment if the specific light positions you pointed out are the correct ones with reversed polarity for the lights. Were you right on those positions?
The kit has been revised over a year ago now to include x1 round 3mm led specifically to fit the blower speed button without cutting. Just not shown in video
The climate control in my silverado 2005 is not automatic, and has two different lights, the centers ones are 6v and the rest are 3 v, can I use the same square led in all places? Can you help on this?
@@j1mmyv707 I have 50 blue leds of 3mm and they are 3v. I installed one of those on the center with a 1k resistor, and works, but I just put one. And I do not know if I can install this LEDs directly on the rest of the places. What do you think.? This 3mm LEDs are clears.
You can use the 5MM 12 volt cube ones i listed for all the bulbs on your 05 Slider style climate. The leds have a resistor inside them so they work from 3 volts to 12 volts
I saw another video and the guy didn't make the degree digits white but was able to us transparent Lens gel paper and stick it across the screen to match up the blue LED lights and it looked amazing, I will try to find the video, he didn't show how he did it but put in the description vaguely how he made it look like a match, plus he did the DIC and gear shift lights like that as well. It's one of the vids searching for envoy or trailblazer Auto ac unit LED switches
5mm , if you don’t want to modify the blower speed control you can put a 3mm one there also. Working on making a listing for a kit with the x10 5mm and 1 3mm for that reason
i just dont understand why people dont take care of the fingers loose skin just hanging out. cut it before you film it is nasty. simple use nail clippers sorry but nasty.
Updated description with links to 12pc & 25pc kits of all 4 colors. Use code (YTLEDSALE) for 10% off!
I am impressed with the thoroughness of this video. I was concerned that I would have to do trial and error to get the polarity of the LEDs correct. Your presenting the chart to show each individual LED position was a great aid. I decided that I would use a solder sucker to clear the holes. I don't like to overheat connections and braid also applies more heat than I desire. Thank you, FUS Attempted Repair for a very helpful video.
Now you just need to do the window remotes ! Great videos
Killer video, fantastic, the lights in my Tahoe are so dim, thank you!
Thank you so much for being so thorough!
I will be doing this on mines , thanks for the video I’ll revisit when I do mine
Have you ever tried putting Transparent Tape for LED Lights, it comes in 1/2 to 3" width over the Display Chip before putting the cover back on to change the color of the Green Temp. They sell it in different colors. This might also work on Cluster Info Center & PRND321?
How would I determine if I have # 4892 or 4893 diagram?
Thanks you.
I soldered my bottom row and the lights don’t come on at all. I had positive in right spot . Wonder what happen
Can ya help???
Do u know if i would be able to add these typ of gauges to my Silverado or would i have to change the pigtail on mine i have the other type with the climaiin the middle and not the knobs
Just curious, there are 11 bulbs to that cluster, but yet the LED kit you listed the eBay link to is a kit of only 10 LEDs
Could you share what type of solder you use and the temperature you set your iron?
do you know of a fix for the knobs on this hvac module
Do you know the part numbers for the rotary controllers so I can order on Digikey? Thanks.
I did mine, they lit up, for about a hour nd then all my lights turned off, what can it be?
can you fix the dim led readout though? if so where do i send it. i have the aftermarket version in my truck, oem went out long ago
How can I rebuild it so the buttons are accurate with the numbers as I move it up and down. I move the nobs colder or hotter and the numbers jump all over
That's the deoxit spray he mentioned, removes any oxidation within the knobs causing the numbers to jump around. If that doesn't fix it, you'll need to replace the bad knob.
What would you charg3va a person to send you that head unit and you do do the work??
Hi. Thanks for your videos!! I have learned so much what I need to do to switch to blue LED’s in My 2005 F350. The problem is I don’t trust myself doing it and I can’t find anyone anywhere around to do it. I need to do my climate control, info, and steering wheel controls. Would you be interested in in doing them? Of course for a price. I have everything tore apart and ready. Also I have the LED’s. Please let me know. Thank You.
Where can I download those diagrams for polarity sir?
Do you have a video on how to light these up to test them before use. I see many people have these lite up on ebay. How do you do that? thanks
Is the polarity the same for 06 trailblazer with manual ac? Thanks
Hey do you guys sell a kit that has bulbs for the dash cluster, light switch cluster and climate control? I’m trying to get them all at once instead of buying each kit seperate, I ordered my dash kit from tachtronics but haven’t gotten anything back from them lol
Is this Polarity diagram the same for a 2008 trailblazer LT
What pins are negative and positive?
Awesome video;Thanks.
Thank you so much for being so thorough! Just did mines .
, thanks for the video I’ll revisit when I do mine
Very nice and informative video. A question please. My numbers are skipping very bad. Even if you turn clockwise to increase the temperature, the numbers go up and down. I might can get it to 72 and one more turn will make it go back down to 60. Will the Deoxit spray fix this and would I have to take the front black faceplate off or can I get away with it by just removing the buttons while the unit is still installed in the car? Kind regards.
worked for me and I used mass airflow cleaner
You have any videos on clusters for these year trucks ?
Great video. I do happen to have the other version board with the plug at the top. I don't see the revision comment if the specific light positions you pointed out are the correct ones with reversed polarity for the lights. Were you right on those positions?
Did you get an answer yet? mine is the same (the other version)
@@mikebowen7316 no reply
@@charleyismael8669 ok thanks
Here is a link to the polarity charts, will be adding more
postimg.cc/gallery/Fz9FKjq
@@Vault-TechSolutions appreciate this! Helps out tremendously. Thanks again...
Will the dimmer switch work with the CUBE LEDS...? Will the LED DIM with switch
Yes, the ebay add says they a dimmable.
Do you sell these already with blue led?
Where do you buy the led lights?
Great resource thanks!
Why not use round leds instead of cutting the panel?
The kit has been revised over a year ago now to include x1 round 3mm led specifically to fit the blower speed button without cutting. Just not shown in video
muchas gracias por compartir su conocimiento
The climate control in my silverado 2005 is not automatic, and has two different lights, the centers ones are 6v and the rest are 3 v, can I use the same square led in all places? Can you help on this?
Yes you can but the center 3 volt may be dimmer than 6 volt . Most 5mm LEDs are 3-6 volts.
@@j1mmyv707 I have 50 blue leds of 3mm and they are 3v. I installed one of those on the center with a 1k resistor, and works, but I just put one. And I do not know if I can install this LEDs directly on the rest of the places. What do you think.? This 3mm LEDs are clears.
You can use the 5MM 12 volt cube ones i listed for all the bulbs on your 05 Slider style climate. The leds have a resistor inside them so they work from 3 volts to 12 volts
Can u change the led screen to white?
I saw another video and the guy didn't make the degree digits white but was able to us transparent Lens gel paper and stick it across the screen to match up the blue LED lights and it looked amazing, I will try to find the video, he didn't show how he did it but put in the description vaguely how he made it look like a match, plus he did the DIC and gear shift lights like that as well. It's one of the vids searching for envoy or trailblazer Auto ac unit LED switches
Good video thank you
are these 5mm leds or 3mm?
5mm , if you don’t want to modify the blower speed control you can put a 3mm one there also. Working on making a listing for a kit with the x10 5mm and 1 3mm for that reason
i installed exactly how the diagram was and had only 2 working
I had none working wtf
Link to polarity charts
postimg.cc/gallery/Fz9FKjq
❤❤❤
Que. Numro de foco lleva
Do u answer at all?
i cant fin this climate control led for tahoe 2002
Ur a saint
You didn’t show how bright they are or the color at all
He showed the board powered up and the LEDs lit up at 15:40. What more do you need?
Can I just send the cluster and climate controls to you and pay you? Lol
i just dont understand why people dont take care of the fingers loose skin just hanging out. cut it before you film it is nasty. simple use nail clippers sorry but nasty.
😢🎉😂🎉❤😂❤
🔥 【ｐｒｏｍｏｓｍ】