Hey, do you know what kind of cables are being used for power and data? My monitor didn’t come with any. I have the original HDMI cable all the USB cable I’ve tried haven’t worked.
Hi Nikescar, I was able to find Tablet PC Settings by searching the windows bar and selecting the option "calibrate the screen for pen or touch" but after getting into that menu when i select my mimo monitor i get a message in details that says "No pen or touch input is available for this display." I'm pretty sure this is on account of the fact that i run my screen 100% off usb and not using HDMI. I did grab the latest displaylink driver too just to double check. If the touch doesnt work correctly because of the hdmi cable, id rather have no touch and no hdmi cable as i dont need the touch option at all and i dont want one more video cable cluttering up my set up.
@@computerheadquarters Make sure you go to the "Configure" section and Click setup. It'll go through each of your screens asking if they are a touch panel. If it is not a touch panel, press the Enter key. When it get to the MIMO, touch the screen anywhere. Now the MIMO is setup as the touchscreen. Click apply, then OK to close the Tablet PC Settings. Reopen Tablet PC Settings, select the MIMO display in the display dropdown, then click Calibrate. Calibrate the screen, Apply, OK. Now the screen should be working. Having only the USB connected (aka DisplayLink) is fine. As far as I know the HDMI on this display is only for video capture, not displaying that HDMI on the monitor. Let me know if you get it working.
@@computerheadquarters Awesome! These things would make a great stream deck if only there were an application for windows touchscreens that work like "Touch Portal"
Control Panel > TouchScreen Settings > calibrate the mimo screen. Read what the screen says. If using two monitors it will tell you to hit Enter to move the calibration to the Mimo screen.
These things are crap. My first MIMO.... broken power jack out of the box. Got it replaced. Second MIMO did not even power up. I give up with this garbage,
Hey, do you know what kind of cables are being used for power and data? My monitor didn’t come with any. I have the original HDMI cable all the USB cable I’ve tried haven’t worked.
Can it work with CCTV DVR? Thanks
Not sure
How do I set it up to mirror the screen instead of acting like a second monitor?
Look for a "duplicate" option in the display settings.
Is the blue cable a USB 3.0 mini?
Sorry i dont have one nearby to check but if you google the part # you may be able to find out.
hi, this monitor work on mac osx ?
Yes
FYI, you can calibrate the touchscreen by going to Control Panel, then Tablet PC Settings, then Configure, then Calibrate.
Hi Nikescar, I was able to find Tablet PC Settings by searching the windows bar and selecting the option "calibrate the screen for pen or touch" but after getting into that menu when i select my mimo monitor i get a message in details that says "No pen or touch input is available for this display." I'm pretty sure this is on account of the fact that i run my screen 100% off usb and not using HDMI. I did grab the latest displaylink driver too just to double check. If the touch doesnt work correctly because of the hdmi cable, id rather have no touch and no hdmi cable as i dont need the touch option at all and i dont want one more video cable cluttering up my set up.
@@computerheadquarters Make sure you go to the "Configure" section and Click setup. It'll go through each of your screens asking if they are a touch panel. If it is not a touch panel, press the Enter key. When it get to the MIMO, touch the screen anywhere. Now the MIMO is setup as the touchscreen. Click apply, then OK to close the Tablet PC Settings. Reopen Tablet PC Settings, select the MIMO display in the display dropdown, then click Calibrate. Calibrate the screen, Apply, OK. Now the screen should be working.
Having only the USB connected (aka DisplayLink) is fine. As far as I know the HDMI on this display is only for video capture, not displaying that HDMI on the monitor.
Let me know if you get it working.
@@nikescar Genius! Thank you, that worked. No HDMI cable needed. Maybe ill make another video.
@@computerheadquarters Awesome! These things would make a great stream deck if only there were an application for windows touchscreens that work like "Touch Portal"
@@nikescar Thank you it is so easy and at this same time complicated not clear :)
yo, what is funktion of hdmi cable? i tried bothways, intake or out take. and didnt get any input or output
I have this same problem, it seems that audio dev is added mic and some video capture dev. but why for what ?
the touchscreen of my mimo monitor couldn't work , any one can help me ?
I have the same issue in two mimo´s, do you solve it?
Control Panel > TouchScreen Settings > calibrate the mimo screen. Read what the screen says. If using two monitors it will tell you to hit Enter to move the calibration to the Mimo screen.
I wish this thing was compatible with the Nintendo Switch!
These things are crap. My first MIMO.... broken power jack out of the box. Got it replaced. Second MIMO did not even power up. I give up with this garbage,
Mine won't stop working.